Symmons 3501-CYL-B User Manual

Location:

Print

Email

Reset Form

™

Shower System

Dia

3501-CYL-B

Specification Submittal

Standard Feature Highlights

■ Shower System with Symmons Temptrol® pressure-balancing
mixing valve with adjustable stop screw to limit handle turn

■ Screwless brass escutcheon (-B)

■ Showerhead, single mode #352SH

■ Mounting bracket and ange for showerhead

■ Standard ow rate is 2.5 gpm (9.5 L/min)
Optional lower ow rate restrictor available

■ Polished chrome nish (standard)

Model Numbers

3501-CYL-B

☐

Shower System with Symmons Temptrol® mixing valve

p/n 4000-BODY

3501-CYL-B-TRM

☐

Trim only, valve must be ordered separately

4000-BODY

☐

Symmons Temptrol® mixing valve without trim

4000-X-BODY

☐

Symmons Temptrol® valve without trim. Valve includes

integral service stops to allow water shut-o for service

Finish Options / Modifications

Append appropriate -sux to model number

-STN

☐

Satin nickel

-

Polished chrome (standard nish)

Options / Modifications

Append appropriate -sux to model number

☐

☐

☐

☐

☐

☐
☐
☐

☐

-CHKS

-REV

Delete

Suffix B

-L/HD

352SH-3

IPS connections: 1/2 inch female IPS

-IPS

connections on Temptrol® mixing valve

Service Stops: Temptrol® mixing valve

-X
includes integral service stops to allow water

shut-o for service, p/n 4000-X-BODY
(available when ordering model 3501-CYL-B)

Check Stops: Temptrol® mixing valve

includes integral check stops

(Requires integral service stop, sux -X

in installations where a positive shut-o device is
used downstream of mixing valve.)

Reverse core: Temptrol® mixing valve

with reverse core. (Requires integral service

stop, sux -X . Used in back-to-back system
installations. HOT on the right, COLD on the le)

Chrome plastic escutcheon

chrome plastic escutcheon is supplied instead

of standard brass escutcheon

Flow rate restrictor, 2.0 gpm (7.6 L/min)

-2.0
Flow rate restrictor, 1.5 gpm (5.7 L/min)

-1.5

Showerhead not included,

Includes mounting bracket and ange

Showerhead is three-mode in place of

standard single mode

. Used

Handle Options / Modifications

Append appropriate -sux to model number

-LR -LP

☐
☐

-LR

Lever handle

-LP

Loop style lever handle

Standards / Certifications

ASME A112.18.1-2005 / CSA B125.1-05
Americans with Disabilities Act (ADA) compliant

Warranty

■ Limited Lifetime - to the original end purchaser in

consumer installations

■ 5 years - for commercial installations

Dimensions Dia Shower System, 3501-CYL-B

5-1/4"

(133 mm)

2-1/2" dia

nished wall

(64 mm)

6-5/8" ±1/2"

(167 mm ±13 mm)

Finished wall to pipe centerline

2-3/8" ± 1/2" (60 mm ±13 mm)

*See note (2)

Finished wall to rear of valve

3-1/2" ± 1/2" (89 mm ±13 mm

7-3/4" dia
(197 mm)

1/2"-14 NPT

showerhead
supply

approx

29"

(737 mm)

5/8" (16 mm)

mounting plate,

Note (1)

*

3"

(76 mm)

±

13 mm)

±

½"

2-7/8

(72 mm

HOT

supply

Notes:

*

(1) Walls for using T-177 mounting plate (MP)

■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max

■ Fiber or acrylic walls (MP required)

■ Plaster or other type walls 1/2" or less (MP optional)

■ Protective shield usage (optional)

(2) Dry wall, plaster or other type walls 1/2" or greater

■ Protective shield is required; snaps on end of valve spindle...

(3) Do not install positive shut-off devices or devices that do not
allow the valve to ow at least 1.5 gpm on control valve outlets

(4) Dimensions subject to change without notice

COLD

supply

Temptrol
control valve

tub spout
supply plug

hot / cold
supply

approx

48"

(1219 mm)

Protective
Shield
p/n T-176

Floor

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]

©2012 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ 062112