Symmons 2DIVBODYNSSRT Operation & Maintenance Manual

2DIVBODYNSSRT

Dual Outlet Diverter, Non-Sharing

Operation & Maintenance Manual

Model Numbers

2DIVBODYNSSRT



Dual Outlet Diverter, Non-Sharing

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.

Dimensions

OUTOUT

CC

BB

OUTOUT

ININ

AA

Specification

Dual outlet diverter valve with no shared functionality.
Features male 1/2" IPS and 1/2" sweat inlet/outlet
connections (in common plane), dened detents, 2 discreet
positions and stringer mounts. Components made from
lead free metal construction.

Compliance

-ASME A112.18.1/CSA B125.1

Measurements

A 2-5/8", 67 mm

Screwless Escutcheons

DD

EE

B

C

D 5-1/4", 133 mm

E

F See note 1
G 4-7/8", 124 mm

Hole Size

Min. Ø 3", 76 mm

Max. Ø 3-1/4", 83 mm

Screw Escutcheons

Hole Size

Min. Ø 1-3/4", 44 mm

Max. Ø 2", 51 mm

(3x) 1/2" male IPS &

(3x) 1/2" sweat

FF

GG

Notes:

1) Figure is determined by style of trim attached to shower valve. See rough-in
dimension drawing for shower valve application with diverter valve.

2) Dimensions subject to change without notice.

Parts Breakdown

DIVERTER FUNCTION 1

B

A

B

FROM SHOWER VALVE

G

DIVERTER FUNCTION 2

Replacement Parts

E

C

D

H

I

Item Description Part Number

A
B

C Cartridge Extender

D Cartridge RTS-2DIV-NS

B
G
H

I

Cap Assembly

Spacer

Spacer

1" Cap Extender

1" Cartridge Extender

4" Mounting Screws

RTS-DIVCAP-

NS-SRT

RTS-DIVEXT-

NS-SRT

RTS-DIV-1EXT-

NS

Tools Required

Adjustable

Wrench

Drill (optional)

Plumber Tape

Safety Glasses

Solder

Torch

Important:
Cartridge (D)
must be installed
with arrow
facing down.

2

Installation

3

2

Important: Do not plug
outlet ports. Do not use
diverter as shut-off valve.

Important: Do not expose
diverter valve to heat for
longer than 2 minutes when
sweating in copper tubing.
Doing so may damage the
internal components of
the valve and will void the
product warranty.

Note: Diverter valve can be installed
in wall with shower valve or in an
adjoining wall to shower valve.

1) Reference rough-in dimension for
shower application with diverter
for proper installation of diverter
valve.

2) Shut-off water supplies.

3) Position diverter valve (E) so port
marked IN is facing down.

E

!

4) Secure stringer mounts on diverter
valve (E) to wood blocking for
support.

E

5) Sweat 1/2" copper tubing from
inlet port on diverter valve
to water source. Sweat 1/2"
copper tubing from outlet ports
to desired accessories.

Optional: Apply plumber tape to
male IPS threads on the inlet and
outlet ports of diverter valve. Install
1/2"-14 NPT copper ttings to the
inlet and outlet ports. Connect
outlets to desired accessories.

Operation

Note: Securing stringer mounts is

necessary for applications where
PEX, or other non rigid tubing, is
used to install diverter valve.

1) Cartridge is factory set to divert
to function 1.

POSITION 1

1

6) Turn on water supplies to ush
plumbing lines free of debris
Check for leaks.

2) Turn handle to position 2 to divert
to function 2.

POSITION 2

2

.

3

Maintenance (Cartridge Replacement)

1

2

1) Remove cap assembly (A) from
diverter valve by turning coun­terclockwise. Remove cartridge
extender (C) and cartridge (D).

E

D

A

2

Note: Spacer (B) will be seated

inside cap assembly (A).

C

2)

Inspect cartridge for debris.
Replace cartridge if necessary.

3) Orient new cartridge (D) with
arrow facing down. Align pegs on
cartridge (D) with indents inside
diverter valve (E).

D

E

4) Align spindle extender (C) with
broach on cartridge (D). Install
spindle extender (C) and cap
assembly (A) to cartridge (D).
Secure cap assembly (A) by
turning clockwise.

C

D

1

A

Notes:

1) Use caution not to dislodge

cartridge from valve body when
installing cap assembly (A).

2) Tighten cap assembly (A) to

75 ± 5 lbf-in of torque.

Troubleshooting Chart

Problem Cause Solution

Diverter valve will not divert water.

Water is leaking from the face of the

diverter valve.

Diverter trim will not install to diverter

valve.

Foreign matter in water supply may

cause blockages in plumbing lines and

the diverter valve cartridge.

Cap assembly is not fully sealed to

diverter valve.

Diverter valve body rough-in is too

deep.

Remove cartridge from diverter valve.

Flush lines free of foreign matter.

Inspect cartridge for debris. Replace

cartridge if necessary.

Remove cap assembly. Inspect

threads for debris. Reinstall cap

assembly to diverter valve at

lbf-in of torque.

Use RTS-DIV-1EXT-NS to extend

diverter stem 1 inch.

75 ± 5

WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer, birth defects, or
other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]

Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-3292 REV 0 ■ 031919