SYM Fiddle User Manual

2. MAINTENANCE INFORMATION SYM

PERIODICAL MAINTENANCE SCHEDULE

Mainte

nance

Code

Air cleaner

1

2nd air jet leaner

2

Fuel filter

3

Oil filter

4

Engine oil change

5
6 Tire pressure
7 Battery inspection
8 Brake & free play check

9 Steering handle check
10 Cushion operation check
11 Every screw tightening check
12 Gear oil check for leaking

Spark plug check or change

13

Gear oil change

14
15 Frame lubrication
16 Exhaust pipe

Ignition timing

17

Emission check in Idling

18

Throttle operation

19

Engine bolt tightening

20

CVT driving device (belt

21

CVT driving device (roller)

22
23 Lights/electrical equipment/mutli-meters
24 Main/side stands & springs
25 Fuel pipes
27 Cam chain

Valve clearance

28

Crankcase vapor control System

29

Crankcase blow-by over-flow pipe

30

2nd air jet system

31

vapor control system

32

Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement C ~ Cleaning (replaced if necessary) L ~ Lubrication

Have your motorcycle checked, adjusted, and recorded maintenance data periodically by your SYM Authorized Dealer to
maintain the motorcycle at the optimum condition
The above maintenance schedule is established by taking the monthly 1000 kilometers as a reference which ever comes
first.

Remarks:

1. These marks “” in the schedule are emission control items. According to EPA regulations, these items

must be perform normally periodical maintenance following the use r manual instructions. They are
prohibited to be adjusted or repaired by unauthorized people. Otherwise, SYM is no responsible for the
charge.

2. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.

3. Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after the
motorcycle has accumulated a higher mileage.

4. Preventive maintenance

a. Ignition system - Perform maintenance and check when continuous abnormal ignition, misfire, after-burn,

overheating occur.

b. Carbon deposit removal - Remove carbon deposits in cylinder head, piston heads, exhaust system when power is

obvious lower than ever.

c. Replace worn out pistons, cylinder head.

Item Initial 300KM

I C R
I C C R

I I R
C C
R I

I I

I I

I I

I I

I I

I I

I I

I I R
R

L
I I
I I

A I

I I
I I

I R

C
I I
I I
I I
I I
I A
I C
I
I I C

I

1 Month

Every1000KM

Replacement for every 5000km(5 months)

3 month

Every3000KM

Replacement for every 2000km

6 month

Every6000KM

1 year

Every12000K

M

2-2