Sylvania 6620LE User Manual

This TV can receive C1 and C2 Caption and Text.
CAPTION MODE
1) Closed Caption Characters can be displayed on the TV screen only when the received broad­cast signal contains Caption Signals.
2) Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
characters will not be displayed.
TEXT MODE
1) Displays the text on the screen by scrolling (max. 7 lines)
2) If the received broadcast signal does not contain caption or text signals, no change will occur.
Notes:
1) When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text.
2) Captions and texts may not match the TV voice exactly.
3) Interference may cause the closed caption system not to function properly.
4) The caption or text characters will not be displayed while the menu display or functions dis­play is shown.
5) If you see this screen:
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select [CAPTION1], [CAPTION2] or [OFF].
CONNECTIONS
PRECAUTIONS
Place your TV in a room with adequate ventilation.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
Leave enough room for air to circulate around the bottom, top and back of the set.
FEATURES
MTS/SAP Tuner
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-
ing system provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control.
On-Screen Function Display
Full-Function Remote Control
Sleep Timer
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function- If there is no signal input from the antenna terminal and no user
operation for 15 minutes, the TV will turn itself off automatically.
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS
VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.
Component Input
The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.
GATE
AV-IN2
R
L
Y
Pb
Pr
AUDIO
COMPONENT
R
L
AUDIO
VIDEO
ANT
HEAD PHONE
S-VIDEO VIDEO
AV-IN1
S-VIDEO VIDEO
ANT
CLOSED CAPTION
UHF Antenna (Not supplied)
VHF Antenna (Not supplied)
VHF/UHF Combiner (Not supplied)
VHF/UHF Combination Antenna (Not supplied)
OR
OR
OUT IN
75-ohm Coaxial Cable
From Cable System
From Cable System or Satellite Antenna 75-ohm Coaxial Cable
CATV Box
*
or Satellite Box (Not supplied)
*Some cable TV systems use scram-
bled signals and require a special converter to receive these channels. Consult your local cable company.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820­40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equip­ment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unautho­rized change or modification is made.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.funai-corp.com
Owner’s Manual
1EMN20036 Printed in China
L0311UM * * * *
LCD TELEVISION
6620LE
(20 INCH TILT STAND TYPE)
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
TILT STAND
T
ilt Stand
Adjust the stand to change the angle of TV (-5°~10°).
RF Cable (Not supplied)
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRE­SPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
You can bracket this product as wall mounting TV using the arm adapted for 100mm (commercially available).
SYLVANIA
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman­ship as follows:
DURATION:
PAR TS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts and LCD image burn-in are not covered under this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or
if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any the product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup­plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter­ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BYA FUNAI AUTHORIZED SER­VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHO­RIZED SERVICE FACILITY.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTYWILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VA RY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or general service procedure, please call 1-800-968-3429 or write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-968-3429
http://www.funai-corp.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Date of Purchase Dealer Purchase from Dealer Address
Dealer Phone No. Model No. Serial No.
5°
10°
INSTALLING THE BATTERIES
1) Remove the battery compartment cover on the remote unit by sliding it while slightly twisting.
2) Insert 2 “AA” penlight batteries into battery compartment in the direction as indicated by the polarity (+ /
-
) markings.
3) Replace the cover.
4) Push the cover on it’s top side until it clicks in order to fit the cover completely to the compartment.
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to pre­vent damage or injury from possible battery leakage.
• Do not try to recharge batteries not intend­ed to be recharged; they can overheat and rupture.
USING A
UDIO/VIDEO INPUT JACKS
When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by pressing the INPUT SELECT button on the remote control or the SELECT button on the front panel on the TV.
•To use the jacks of AV-IN1 on the TV, select “VIDEO1”.
•To use the jacks of AV-IN2 on the TV, select “VIDEO2”.
Note:
• When you use the S-VIDEO connection, S-VIDEO jack is given priority over the VIDEO jack.
GATE
AV-IN2
R
L
Y
Pb
Pr
AUDIO
COMPONENT
R
L
AUDIO
VIDEO
ANT
HEAD PHONE
S-VIDEO VIDEO
AV-IN1
S-VIDEO VIDEO
11
12
13
14
15 16
17
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVIC­ING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUT­ING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERAT­ING AND MAINTENANCE INSTRUC­TIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
The important note is located on the rear of the cabinet.
1. Read instructions-All the safety and operating instruc­tions should be read before the appliance is operated.
2. Retain Instructions-The safety and operating instruc­tions should be retained for future reference.
3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions-All operating and use instructions should be followed.
5. Cleaning-Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clean­ers. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninter­rupted service and that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6. Attachments-Do not use attachments not recommend­ed by the TV manufacturer as they may cause hazards.
7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, caus­ing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the man­ufacturer’s instructions and should use a mounting accessory recom­mended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
AMEUBLES- Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précau­tion. Un arrêt brusque, l’utilisa­tion d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.
9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufac­turer’s instructions have been adhered to .
10. Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the out­let, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polar­ized plug.
12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the anten­na or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPANo. 70, provides information with respect to proper grounding of the mast and supporting struc­ture, grounding of the lead-in wire to an antenna dis­charge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding elec­trodes, and requirements for the grounding electrode. (Fig. A)
14. Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an out­side antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
16. Overloading-Do not overload wall outlets and exten­sion cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV.
18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service per­sonnel under the following conditions:
a. When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni­cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in perfor-
mance-this indicates a need for service.
20. Replacement Parts-When replacement parts are required, be sure the service technician uses replace­ment parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to per­form routine safety checks to determine that the TV is in proper operating condition.
22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250, PART H)
S2898A
GROUND CLAMPS
GROUNDING CONDUCTORS (NEC SECTION 810-21)
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
OPERATING CONTROLS AND FUNCTIONS
- REAR PANEL -
1. MENU button- Press to display the menu
on the TV screen.
2. VOLUME (VOL) /buttons- Press to
control the volume level.
Press the VOL button to determine the
setting mode in the set up menu Press to select or adjust from a particular menu (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment or V-CHIP Set Up).
3. CHANNEL (CH) /buttons- Press to
select memorized channel.
Press to select the setting mode from the
menu on the TV screen.
Press to select item you want to adjust in
the picture control mode.
4. INPUT SELECT button- Press to select
TV or video input mode (VIDEO1 or VIDEO2) . (See USING AUDIO/VIDEO INPUT JACKS.)
5. POWER button- Press to turn the TV ON
and OFF.
6. Channel number button- Press two digits
to directly access the desired channel. Remember to press a "0" before a single digit channel.
+100 button- Press to select cable chan-
nels higher than 99.
7. MUTE button- Press to turn off the sound
portion of the TV program (Volume level display turns LIGHT RED from LIGHT BLUE). Press this button again or press the VOL(ume) or button to restore sound.
8. CH RETURN button- Press to go back to
the previously viewed channel. Press it again to return to the present channel.
9. SLEEP button- Press to display the sleep
timer and start the function. The shut off time can be determined by the number of times you press the button (0, 10, 20, 30, ..90, 0 minutes).
10. DISPLAY button- Press to display the
channel number on the screen. The chan­nel number will disappear by pressing it again.
11. AUDIO L/R input jacks- VIDEO2:
Connect to the left/right audio output jacks of a DVD player or set top box.
12. COMPONENT video input jacks-
Connect to the component video out jacks of a DVD or set top box.
13. AUDIO L/R input jacks- VIDEO1:
Connect to the left/right audio output jacks of a video camera, VCR or video game. Note: The AUDIO L jack is for mono input. The sound is heard from both speak­ers. Use this jack for connecting monaural audio equipment.
14.VIDEO input jack- Connect to the video
output jack of a video camera, VCR or video game.
15. S-VIDEO input jack- Connect to the S-
VIDEO output jack of a video camera or VCR using the S-VIDEO cable (not sup­plied).
Note: The S-VIDEO jack is given priority
over the VIDEO jack.
16. ANT(enna). in jack- Connect to an anten-
na, cable system or satellite system.
17.HEADPHONE jack- Connect headphone
(not supplied) for personal listening.
Note: Do not connect earphones that have
an L-shaped plug. The plug may interfere with the cabinet.
- TOP PANEL -
- REMOTE CONTROL -
POWER
INPUT
SELECT
DISPLAY SLEEP
MUTE CH RETURN
VOL
123
456
789
MENU
0
+100
CH
TV
5
6
2
1 7
10
8
9
4
3
PORTABLE CART WARNING
S3126A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
S3126A
CHANNEL
INPUT SELECT
POWER
VOLUME
MENU
12 345
AV-IN2
R
AUDIO
L
COMPONENT
Y
Pb
Pr
R
AUDIO
L
AV-IN1
VIDEO
S-VIDEO VIDEO
ANT
HEAD PHONE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the procedure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears on the TV screen.
4) Press the CH(annel) or button to point to "LANGUAGE".
5) Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS] by using the VOL(ume) or button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears on the TV screen.
3) Press the CH(annel) or button to point to "CHANNEL SET UP". Then press the VOL(ume) button.
4) Press the CH(annel) or button to point to "AUTO PRESET CH". Then press the VOL(ume) button. The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
channels.
When AUTO PRESET CH action is completed, the lowest memorized channel reappears on
the screen. When there is no signal to ANT in jack, "NO TV SIGNAL" will appears. In this case, please check the antenna connections, then try again the auto preset channel.
When you press the CH(annel) ▼ or button after selecting AUTO PRESET CH,
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO PRESET CH action again when reception conditions are better.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) or button to point to "CHANNEL SET UP". Then press the VOL(ume) button.
3) Press the VOL(ume) button so that "ADD/DELETE CH" is selected.
4) Use the CH(annel) or button to select the channel you wish to put into memory or to erase from memory. Perform "ADD/DELETE CH" function while this display appears on the screen.
Press the VOL(ume) button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) or button to point to "TV SOUND".
3) Press the VOL(ume) or button to select your desired stereo mode. ([MAIN], [MONO] or [SAP])
PICTURE ADJUSTMENT
BACK LIGHT SELECTION
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) or button to point to "BACK LIGHT".
3) Press the VOL(ume) or button to select the mode you wish.
4) When done, press the MENU button to exit the menu.
PREPARATION FOR USE
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) or button.
3) Adjust the volume to the desired listening level using the VOL(ume) or button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the POWER automatically turn off after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes. 10 minutes each time the SLEEP button is pressed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.
CLOSED CAPTION SELECTION
To cancel the sleep timer:
Press the SLEEP button repeated­ly until "SLEEP 0 MINUTE" is displayed.
You may view specially labeled (cc) TV pro­grams, movies, news and prerecorded tapes, etc. with either a dialogue caption or text dis­play added to the program.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) or button to point to "CAPTION".
3) Press the VOL(ume) or button to select the mode you wish.
4) When done, press the MENU button to exit the menu.
To show the status, press the DISPLAY button on the remote control.
SAP: Second Audio Program, which means your program, can also be received in a second lan­guage or sometimes a radio station.
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [
CAPTION1
] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [
CAPTION2
] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT1] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [TEXT2] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
Typ e of broadcast
Regular
-None-
ST ER EO
SAP
Menu
Selection
MAIN
MONO
SAP
-None- -None-
MONO
ST ER EO
SAP
MAIN
MAIN
Stereo
broadcast
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
VOL(ume)
VOL(ume)
to decrease brightness
to increase brightness
to decrease contrast
to increase contrast
to pale to brilliant
to purple to green
to soft to clear
-
BRIGHTNESS
+ -
CONTRAST
+ -
COLOR
+ -
TINT
+ -
SHARPNESS
+
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) or button to point “PICTURE”. Then press the VOL(ume) button.
3) Select the feature you wish to adjust with the CH(annel) or button and adjust it with the VOL(ume) or button.
OPERATIONS
: Press the CH(annel) or button.
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [NORMAL]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [DARK]
: Press the VOL(ume) or button.
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MONO] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [SAP] BACK LIGHT [BRIGHT]
: Press the VOL(ume) or button.
: Press the VOL(ume) ▼ or ▲ button.
Note:
In the above steps, the picture adjustment display will disappear from the TV screen automati­cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) button so that "PICTURE" is selected. Then press the CH(annel) or button repeatedly until the display returns to the screen.
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
- TV SET UP -
PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT]
- CHANNEL SET UP -
ADD/DELETE CH (TV)
AUTO PRESET CH
SLEEP 10 MINUTE
Loading...
+ 5 hidden pages