Sylvania 6620LDG User Manual

If you need additional operating assistance
after reading this owner's manual or to order
replacement accessories, please call
TOLL FREE : 1-800-968-3429.
Or visit our WEB SITE at
http://www.SylvaniaConsumerElectronics.com

6620LDG (20 inch)

EN - 2 -

IMPORTANT SAFEGUARDS

PRECAUTIONS

The caution marking is located on the rear of the cabinet.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

1. Read instructions - All the safety and operating instructions should
be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should
be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operat­ing instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be
followed.

5.

Cleaning - Unplug the unit from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of the loss
of an authorization code for a CATV converter, is not intended to be
unplugged by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in the cleaning
description otherwise required in item 5.

6. Attachments - Do not use attachments not recommended by the
unit manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this unit near water - for exam­ple, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this unit on an unstable
cart, stand, tripod, bracket, or table. The unit may
fall, causing serious injury to someone, and serious
damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manu­facturer, or sold with the unit. Any mounting of the appliance should
follow the manufacturer’s instructions and should use a mounting
accessory recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combi­nation to overturn.
Ameubles - Cet appareil ne doit être placé que sur
un meuble (avec ou sans roulettes) recommandé
par le fabricant. Si vous l’installez sur un meuble à
roulettes, déplacez les deux ensembles avec pré­caution. Un arrêt brusque, l’utilisation d’une force
excessive et des surfaces irrégulières risquent de
déstabiliser l’ensemble et de le renverser.

9. Ventilation - Slots and openings in the cabinet and the back or bot­tom are provided for ventilation and to ensure reliable operation of
the unit and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by
placing the unit on a bed, sofa, rug, or other similar surface. This
unit should never be placed near or over a radiator or heat register.
This unit should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manu­facturer’s instructions have been adhered to.

10. Power Sources - This unit should be operated only from the type of

power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance deal­er or local power company. For the units intended to operate from
battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This unit is equipped with a polar­ized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

12. Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
appliance.

13. Outdoor Antenna grounding - If an outside antenna or cable sys­tem is connected to the unit, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding con­ductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig. A)

PORTABLE CART WARNING

S3126A

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

EXAMPLE OF ANTENNA GROUNDING AS PER

ELECTRIC
SERVICE
EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE

S289 8A

FIGURE A

NATIONAL EL ECTRICAL CODE

GROUND

CLAMP

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

ANTENNA

LEAD IN
WIRE

ANTENNA

DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

- 3 - EN- 3 - EN

Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.

This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.

FCC WARNING- This equipment may generate or use
radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the mod­ifications are expressly approved in the owner’s manual.
The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason­able protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful inter­ference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2)

Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.

4)

Consult the dealer or an experienced radio/TV technician for help.

LASER SAFETY

This unit employs a laser. Only a qualified service person
should remove the cover or attempt to service this device,
due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZ­ARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIA­TION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHA­NISM.

This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can
be reused. Please dispose of any materials in accordance
with your local recycling regulations.
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations con­cerning chemical wastes.

The serial number of this product may be found on the back of the unit. No other unit has the same serial number as yours.
You should record the number and other vital information here and retain this book as a permanent record of your purchase
to aid identification in case of theft. Serial numbers are not kept on file.

14.

Lightning-For added protection for this unit receiver during a

lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and dis­connect the antenna or cable system. This will prevent damage
to the unit due to lightning and power-line surges.

15.

Power Lines-An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.

Object and Liquid Entry-Never push objects of any kind

into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.

18.

Servicing-Do not attempt to service this unit yourself as opening

or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service-Unplug this unit from the wall

outlet and refer servicing to qualified service personnel
under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b.

If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the oper-

ating instructions. Adjust only those controls that are cov-

ered by the operating instructions, as improper adjustment

of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance,

this indicates a need for service.

20.

Replacement Parts-When replacement parts are required, be

sure the service technician has used replacement parts speci-

fied by the manufacturer that have the same characteristics as

the original part. Unauthorized substitutions may result in fire,

electric shock, injury to persons or other hazards.

21.

Safety Check-Upon completion of any service or repairs to this

unit, ask the service technician to perform routine safety checks

to determine that the unit is in proper operating condition.

22.Heat-This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

EN - 4 -

BatteriesRemote Control Unit

2 AA Batteries( NE240UD )

Owner’s Manual

( 1EMN21903 )

SUPPLIED ACCESSORIES

•

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our
help line mentioned on the front page.

•

Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.

For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:

•

The stand of this TV is
folded when you purchased.
Place this TV face-down
on a flat surface covered
with the soft cloth.

•

Bend the stand slowly to
forward until it clicks.

•

If you want to fold the stand again,
insert a thin rod into the hole in
the right side of the stand as
illustrated, bend the stand back­ward while you keep pushing the
hole.

•

Shield it from direct sunlight and
keep it away from sources of intense heat.

•

Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes at the top or bottom of the unit. Do not place
the unit on a carpet because this will block the
ventilation holes.

•

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the unit near strong magnetic fields.

•

Avoid moving the unit to locations where
temperature differences are extreme.

•

Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the unit.

•

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.

•

If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.

•

Do not put your fingers or objects into the unit disc slot

.

•

Do not place anything directly on top of the unit.

Moisture condensation may occur inside the unit when
it is moved from a cold place to a warm place or after
heating a cold room or under conditions of high humid­ity. If a DVD is played in a unit which has moisture, it
may damage the DVD and the unit. Therefore when the
condensation occurs inside the unit, turn the unit on
and allow at least 2 hours for the unit to dry out.

The following symbols below appear in some head­ings in this manual.

: Description refers to playback of DVD video discs

(in the DVD mode).

: Description refers to playback of Audio CDs

(in the DVD mode).

: Description refers to playback of CD-RW/-R with

MP3 files (in the DVD mode).

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

You can adjust the stand to change the angle of the
TV (-5° to 10°).

QUICK

TO AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

LOCATION

MOISTURE WARNING

SYMBOLS USED IN THIS MANUAL

TILT STAND

10˚

-5˚

Do not bend from this side.

- 5 - EN

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

TO AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . .4

MOISTURE WARNING . . . . . . . . . . . . . . . . . . . . . . . .4

SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . .4

TILT STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .5

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . .7

INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . .8

PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . . .9

ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . . .9

EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . .10

TV OPERATION AND SETTINGS . . . . . . . . . . . . . . . . .11

INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . . .11

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12

PICTURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . .13

BACK LIGHT SETTING . . . . . . . . . . . . . . . . . . . . . . .13

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . . . .14

MTS (Multi-Channel Television Sound) System . . . . . .14

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

TV RATING SET UP . . . . . . . . . . . . . . . . . . . . . .15

MPAA RATING SET UP . . . . . . . . . . . . . . . . . . .16

CHANGE ACCESS CODE . . . . . . . . . . . . . . . . .16

MENU LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .16

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .17

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . .17

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .18

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

STEP BY STEP PLAYBACK . . . . . . . . . . . . . . . . . . .19

FAST FORWARD / FAST REVERSE . . . . . . . . . . . . .20

SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . .20

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .21

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .21

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

MARKER SET UP SCREEN . . . . . . . . . . . . . . . . . . .22

SPECIAL PLAYBACK FUNCTION . . . . . . . . . . . . . . . . .23

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .24

CHANGING THE SETTINGS . . . . . . . . . . . . . . . . . . . . .25

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .25

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .25

STEREO SOUND MODE . . . . . . . . . . . . . . . . . . . . . .25

CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . .26

BLACK LEVEL SETTING . . . . . . . . . . . . . . . . . . . . . .26

VIRTUAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . .26

THE ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . .27

CHANGING THE DVD SET UP ITEMS . . . . . . . . . . . . . .28

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . .28

DISPLAY SETTING . . . . . . . . . . . . . . . . . . . . . .28

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . . . .29

PARENTAL CONTROL . . . . . . . . . . . . . . . . . . . .29

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . .30

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . .31

CABLE CHANNEL DESIGNATIONS . . . . . . . . . . . . .31

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . .32

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

- 5 - EN- 5 - EN- 5 - EN- 5 - EN

TABLE OF CONTENTS

TV SECTION

DDVD SECTION

VD SECTION

A
B
C

D
E
F
G
H

EN - 6 -

•

MTS/SAP Tuner

•

Infrared remote control

•

Trilingual on screen TV setup display available in
English, Spanish or French

•

181 channel capability PLL frequency synthesizer
tuner with direct station call

(A converter may be

necessary to view scrambled cable channels.)

•

Closed Caption Decoder–You may view specially

labeled (cc) TV programs, movies, news, etc. with
either a dialogue caption or text display added to
the program.

•

Auto power off system–If there is no air signal input

from the antenna terminal and no operation for 15
minutes, the unit will turn itself off automatically.

•

Sleep timer–Allows you to have the unit automati-

cally turn off at a desired time.

•

V-CHIP–Enables parents to prevent their children

from watching inappropriate material on TV.

FEATURES

TV Mode

DVD Mode

•

Dolby Digital sound

This unit can handle Dolby Digital Multi-channel sur­round sound when connected to a Dolby Digital
decoder.

•

Still/fast/slow/step playback

Various playback modes are available including
still pictures, fast forward/reverse, slow motion and
step frames.

•

Random playback for Audio CD and MP3

This unit can shuffle the order of tracks to play
them in random order.

•

Program playback for Audio CD and MP3

You can program the order of tracks to play them
in any desired order.

•

DVD menus in a desired language

You can display DVD menus in a desired language,
if available on a DVD.

•

Screen saver

If the screen saver program is set to ON, it starts
when there is no input from the unit for 5 minutes
in stop mode.

•

Subtitles in a desired language

You can select a desired language for the display
subtitles, if that language is available on a disc.

•

Selecting a camera angle

You can select the desired camera angle, if a disc
contains sequences recorded from different angles.

•

Choices for audio language and sound mode

You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.

•

Parental lock

You can set the control level to limit playback of
discs which may not be suitable for children.

•

Automatic detection of discs

This unit automatically detects if the loaded disc is
DVD, Audio CD or

CD-RW/-R with MP3 files

.

•

On-screen display

Information about the current operation can be dis­played on a TV screen, allowing you to confirm the
currently active functions (such as program play­back), on the TV screen using the remote control.

•

Search

Chapter search / Title search / Track search / Time
search

•

Repeat

Chapter / Title / Track / Group / All / A-B

•

Zoom

Allows you to enlarge video image.

•

Marker

The part designated by user can be called back.

•

Resume Play

User can resume to playback from the part at
which the play was stopped.

•

Virtual Surround

•

Bit rate indication

•

DRC (Dynamic range control)

You can control the range of sound volume.

- 7 - EN- 7 - EN- 7 - EN- 7 - EN- 7 - EN- 7 - EN

- REMOTE CONTROL

OPERATING CONTROLS AND FUNCTIONS

NOTE

•

When you select DVD mode, press [PLAY OO] or [EJECT A] first or insert a disc into the disc slot.
Otherwise, the DVD features are not operated.

1.

POWER button

(P.11, P.18)

Press to turn the power on and off.

2.PICTURE button

(P.13)

Press to adjust the picture.

3.

Number buttons

(P.11, P.21)

Press to select a desired channel number directly.

+100 button (For TV mode)

Press to select channels higher than 99.

+10 button (For DVD mode)

Press to enter desired numbers higher than 9.

4.

SLEEP button

(P.13)

Press to set the Sleep Timer.

5.

SKIP H / G buttons

(P.21)

Press once to skip chapters/tracks to a desired point.

6.PLAY O button

(P.18)

Press to playback the disc.

7.

PAUSE F button

(P.19)

Press to pause the current disc operation.

8.

DISPLAY button

For

TV mode

(P.14):

Press to display the current channel number on
the TV screen.

For

DVD mode

(P.27):

P

ress to display the current status on the TV screen.

9.SETUP button

(P.12, P.28)

Press to enter or exit the setup menu of TV/DVD.

10.

TITLE button

(P.19)

Press to display the title menu.

11.

CLEAR button

(P.21)

Press to clear/cancel a setting currently entered.
Press to clear “DISC INSIDE” display.

12.

MODE button

(P.24)

Press to call up the program/random screen in
stop mode.
Press to call up the Black Level Setting/Virtual
Surround screen during playback.

13.

SEARCH MODE button

(P.21)

Press to locate a desired point.

14.

AUDIO button

For TV mode (P.14): Press to select TV sound

mode (STEREO/SAP/MONO).

For DVD mode

(P.25): Press to select a desired

audio language (if available).

15.

EJECT A button

(P.18)

Press to remove a disc from the unit.

16.

SELECT button

(P.11)

Press to select the TV mode, external input mode
or DVD mode.

17.

CH.K/ Lbuttons

(P.11)

Press to select memorized channels.

18.

VOL.X/ Ybuttons

(P.11)

Press to control the volume level for the DVD and
TV.

19.

MUTE button

(P.11)

Press to mute the sound or press it again to
restore sound.

20.

ZOOM button

(P.20)

Press to enlarge the part of a DVD-reproduced
image.

21.

REVEbutton (P.20)

Press to view the DVD picture in fast/slow
reverse motion.

FWD Dbutton (P.20)

Press to view in fast/slow forward motion.

22.

STOP C button

(P.18)

Press to stop operation of the disc.

23.

DISC MENU button

(P.19)

Calls up the DVD menu.

24.

ENTER button

(P.12, P.19)

Press to accept a setting.

25.

K (Up) / L (Down) / { (Left) / B (Right) buttons

(P.12, P.19)

Press to select or adjust menu items.

[Fig. 1]

1
2

3

4

5
6

7

8

9
10
11

12
13

14

POWER PICTURE

123

456

789

SLEEP

SKIP

REV

PAUSE

DISPLAY

CLEAR

MODE

SELECT

+100

0 +10

PLAY

STOP

SLOW

ENTER

REPEATSEARCH MODE

FWD

EJECT

CH.

VOL.

MUTEZOOM

DISC

MENU

RETURNTITLESETUP

A

ANGLESUBTITLEAUDIO

15
16

17

18

19
20

21

22

23
24
25

26

-

B

27

28
29

30

EN - 8 -

NOTE

•

We do not recommend the use of universal remote controls. Not all of the functions may be controlled
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.

INSTALLING THE BATTERIES

1 Open the battery compartment cover by

pressing the cover on the remote control unit
in the direction of the arrow.

2 Insert 2 “AA” penlight batteries into the bat-

tery compartment in the direction indicated by
the polarity (+/-) markings.

3 Replace the cover.

BATTERY PRECAUTIONS

•

Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.

•

Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.

•

If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.

•

Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.

31. MENU button

Press to enter or exit the setup menu of TV/DVD.

32.

STOP C button

(P.18)

Press to stop operation of the disc.

33.

PLAY B button

(P.18)

Press to playback of the disc.

34.

EJECT Abutton

(P.18)

Press to remove a disc from the unit.

35. VOLUME

Y/ X

buttons

(P.11)

Press to control the volume level for the DVD and
TV.

36.

CHANNEL L/ Kbuttons

(P.11)

Press to select memorized channels.

37.

SELECT button

(P.11)

Press to select to TV mode, external input mode
or DVD mode.

38.

POWER button

(P.11, P.18)

Press to turn the power on and off.

39. Remote sensor window

- CONTROL PANEL

DVD

31 37 38

39

33

32 34 35 36

[Fig. 2]

26. RETURN button

(P.22)

Press to return to the previous screen in the setup
menu.

27.

A-B button

(P.23)

Press to repeat the playback of a selected section.

28.

ANGLE button

(P.26)

Press to change the camera angle to see the
sequence being played back from a different angle
(if available).

29. REPEAT button

(P.23)

Repeats playback of the current disc, title,
chapter, group or track.

30.

SUBTITLE button

(P.25)

Press to select a desired subtitle language.

IF YOU HAVE A JACK ON THE WALL

Connect the TV to the wall-mounted antenna jack
with an RF cable (commercially available).

IF YOU HAVE A WIRED CABLE

Connect the TV to the wired antenna cable.

•

Before plugging the antenna into the ANT jack of the
unit, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
the ANT jack of the unit.

•

Cables used here are commercially available.

•

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT jack
before moving the unit.

- 9 - EN

NOTE

PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

- ANTENNA/CABLE CONNECTION

Note to CATV system installer:

•

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.

Bent pin

Cable

Plug

(Needs to be

straightened)

(Straight pin)

WHEN USING CABLE BOX/SATELLITE
BOX

If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown above.

Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the remote control of this unit.

- CABLE/SATELLITE BOX CONNECTION

NOTE

NOTE

[Rear of this unit]

DIGITAL
AUDIO OUT

from Cable TV signal
or Antenna

RF Cable

(COAXIAL)

2

O

E

R

D
I
V

O

I

D

L

U

A

T

N

E

N
O
P

M

Y

P

C

b

P

r

P

R

O
I

D

L

U

A

O

1

E

O

ID

E

V

D
I

V

O
E

D
I
V

-

S

T
N
A

E
N
O

H

P

D
A
E

H

ANT

[Rear of this unit]

L

T

A

T

U

I

O
G
I

)

O

D

I

L

D

A

I
U

X

A

A
O
C

(

2
O
E

R

D
I

V

O

I

D

L

U

A

T

N
E
N

O

P

M

Y

P

C

Pb

Pr

R

O

I

D

L

U

A

O

1

E

O

D
I

E

V

D
I

V

S-VIDEO

T

N
A

E

N
O

H

P

D
A
E

H

T

N

A

Cable Box
or Satellite Box

OUT IN

75-ohm
Coaxial Cable

from Cable Company
or Satellite dish

EN - 10 -

You can connect this unit to your own Audio/Video
equipment.

•

Be sure to turn off the power to all components in
the system before connecting another component.

•

Refer to the Owner’s Manuals for the equipment
to be connected to the unit.

AUDIO

VIDEO2

VIDEO1

•

The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck.

•

If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 29.)

•

Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing
a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 29.)

•

If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.

•

If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.

- AUDIO OUTPUT

- VIDEO2 INPUT

- VIDEO1 INPUT

EXTERNAL CONNECTION

R

L

S

-V

ID

E

O

V

ID

E

O

V

ID

E

O

1

A

U

D

IO

NOTE

L

Y

Pb

Pr

R

COMPONENT

V

ID

E

O

2

A

U

D

IO

Component
Video Cable

Audio Cable

Video Game

Video Camera

ex.

(OUT)

(OUT)

Use this connection if your own A/V equipment (e.g.
VCR) has Video output and Audio out jacks. When
using S-Video cable, better picture is available.

Use this connection if your own A/V equipment (e.g.
video camera, video game) has Component Video
output (Y, Pb, Pr) jacks. You can enjoy the best pic­ture with this connection.

D

IG

IT

A

L

A

U

D

IO

O

U

T

(C

O

A

X

IA

L

)

Home Audio System

Dolby Digital decoder

To coaxial digital
audio input jack

You can enjoy DVD sound with more
presence by connecting digital audio
equipment such as Dolby Digital decoder.

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.

When you use the external input, select “VIDEO1” or
“VIDEO2” by pressing [SELECT]. (Refer to page 11.)

•

To use the VIDEO1 input jacks, select “VIDEO1”.

•

To use the VIDEO2 input jacks, select “VIDEO2”.

NOTE

NOTE

L

T

U

ITA

O

IG

IO

D

D

U

XIAL)

A

A

O

(C

2

O

E

R

D
I
V

O
I

D

L

U

A

T
N
E

N

O
P
M

Y

P

C

b
P

r

P

R

O

I
D

L

U

A

O

1

E

O

D

I

E

V

D
I

V

S-VIDEO

T
N

A

E
N

O
H
P

D
A
E

H

ex.

(OUT)

(OUT)

(OUT)

Video Cassette
Recorder

Audio Cable

Video Cable

OR

S-Video Cable

- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN- 11 - EN

TV OPERATION AND SETTINGS

TV SECTION

TV SECTION

TV OPERATION AND SETTINGS

VOLUME 20

C C C C C C C C C C C C C C C C

- HELPFUL HINTS -

1. PLEASE CHECK TO SEE IF THE
ANTENNA/CABLE/SATELLITE IS
PROPERLY CONNECTED.

2. DID YOU PERFORM “AUTO PRESET CH” ?

3. PLEASE REFER TO FRONT PAGE OF THE
OWNER’S MANUAL OR REAR PANEL FOR
SUPPORT LINE INFORMATION.

NOTE

When you turn on the power for the first time,
the SELECT LANGUAGE screen is displayed.
Select the language for screen display and perform
auto programming of the channels.

1 After antenna or cable connection is

completed, connect the power cord
into a standard AC outlet.

• If any digits are displayed in the corner of the

screen, press [POWER] without unplugging
the power cord.

2 Press [POWER] to turn on the unit.

3 Press one of the keys listed

below to select the desired
language of on-screen menu.

•

ENGLISH: [CH.K]

•

ESPAÑOL: [CH.L]

•

FRANÇAIS: [VOL.X]

4 Confirm the antenna (or cable)

connection and press [CH.K].

•

The tuner scans and memorizes
all active channels in your area.

5 When the scanning is

completed, the tuner stops
on the lowest memorized
channel.

•

If [MENU] is pressed during channel scanning,
the tuner stops scanning and the lowest memo­rized channel is displayed.

•

The INITIAL SETUP menu is displayed
every time you turn on the unit unless the
scanning is completed.

•

In case no channel can be
received by the channel scan­ning, “NO TV SIGNALS” is
displayed on the screen. Turn
off the unit and check the
antenna connection, then
follow steps 1 to 5 again.

•

You can change the setting after completing
INITIAL SET UP by LANGUAGE menu or
CHANNEL SET UP menu. (Refer to
“MENU LANGUAGE” on page 16 or
“CHANNEL SET UP” on page 12).

1 Press[POWER] to turn on the unit.

•

If the TV screen shows snow
noise and there is no operation
for more than 5 seconds,
“HELPFUL HINTS” appears.
Follow the instructions listed on-screen.

•

If those settings do not work properly, please call our
help line on the front page of this owner's manual.

2 Press [CH. K / L] or the Number buttons to

select the desired channel number.

For channel number selection with number buttons

:

•

To select single-digit channel number, press

[0]

first. (e.g. Press [0] [2] for channel 2.)

•

To select cable channels which are higher
than 99, press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for channel 125.)

3 Press [VOL.

XX/ YY

] to select the desired vol-

ume level.

•

Press [MUTE] to instantly mute the sound.
Press it again to restore the previous volume level.

•

If you press [CH. K / L] in the DVD mode,
you can change the TV channels. Even if you
turn off the unit in the DVD mode, when you
turn it on again, it will go into the TV mode.

TO WATCH CABLE OR SATELLITE
CHANNEL

If the unit is connected to a cable box or satellite
box, press [CH. K / L] to select CH3 or CH4
according to the output channel setting of the device
and select desired channel on that device.

TO WATCH EXTERNAL INPUT

When an external equipment is connected to
AUDIO/VIDEO input jacks on the right side, press

[SELECT] or [CH. K / L] repeatedly until
“VIDEO1” or “VIDEO2” appears on the screen.

WATCHING A TV PROGRAM

NOTE

NOTE

OR

CH 15

(Example)

TV

TV

NO TV SIGNALS

INITIAL SET UP

SELECT LANGUAGE

ENGLISH NEXT:PRESS CH

K

ESPAÑOL DESPUÉS:PRESIONE CH

L

FRANÇAIS APRÈS:PRESSEZ VOL

X

– INITIAL SETUP –

PLEASE CONNECT ANTENNA OR CABLE
OR SATELLITE TO THIS UNIT.
THEN PRESS CH K,
IN ORDER TO PERFORM
“AUTO PRESET CH ”.

NOTE

NOTE

POWER

POWER

CH.

VOL.

123
456
789

+100

0 +10

EN - 12 -

AUTO CHANNEL PROGRAMMING

As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.

1 Press [SETUP] then press [

K

] or [L] to point

to “CHANNEL SET UP”.

2 Press [ENTER] then press [

K

] or [L] to point

to “AUTO PRESET CH”.

3 Press [ENTER].

•

The tuner scans and memorizes all the active
channels in your area.

•

The tuner stops on the lowest memorized channel.

•

When “AUTO PRESET CH” is activated
where there is no TV signal input, “NO TV
SIGNAL” will appear on the display after the
completion of channel scanning.

•

The unit may recognize CATV channels to be
TV channels if reception condition is poor. In
this case, check the antenna connection and
try “AUTO PRESET CH” again when recep­tion conditions are better.

•

Auto channel programming is NOT neces­sary when connected to a cable box or
satellite box. Just select the channel for
cable box or satellite input (ex. CH3 or
CH4) on the unit, then select your desired
channel on the cable box or satellite box.

ADDING/DELETING CHANNELS

The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)

1 Press [SETUP] then press [

K

] or [L] to point

to “CHANNEL SET UP”.

2 Press [ENTER] then press [

K

] or [L] to point

to “ADD/DELETE CH”.

3 Press [ENTER] then press the Number but-

tons or [CH.KK/ LL] to select the desired

channel number.

4 Press [ENTER] then the channel number

turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.

•

To delete another channel, repeat steps 3 to 4.

•

If you press [ENTER] again, the channel is
memorized again.

5 Press [SETUP] to exit the menu.

•

To confirm that channel(s) has(have) been
deleted or added, press [CH. K / L].

– CHANNEL SET UP –

B ADD / DELETE CH (CATV)

AUTO PRESET CH

- TV SET UP -

B CHANNEL SET UP

V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]

- TV SET UP -

B CHANNEL SET UP

V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO PRESET CH

CHANNEL SET UP

NOTE

Added channel : Light blue
Deleted channel : Light red

NOTE

15

ADD/DELETE

SETUP

ENTER

ENTER

SETUP

ENTER

ENTER

123
456
789

+100

0 +10

ENTER

SETUP

•

Shaded buttons are used for following operation.

The unit’s picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory specifi­cations. Although they are usually the best, you may
need to make some further adjustments for a more
natural looking image.

1

Press [PICTURE] then press [K] or [L] to select
the desired control “BRIGHTNESS”, “CONTRAST”,
“COLOR”, “TINT” or “SHARPNESS”.

2 Press

[

s] or [B]to adjust to your desired

level within 5 seconds.

•

Even if there is a power failure of any kind, the
unit will retain its memory for this feature.

•

The picture control display will disappear automati­cally after 10 seconds unless you press any buttons.

1 Press [SETUP] then press [

K

] or [L] to point

to “BACK LIGHT”.

2 Press [ENTER] then press [

s

] or [B] to

select to “BRIGHT”, “NORMAL” or “DARK”.

3Press [SETUP].

The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.

1 Press [SLEEP].

2 Press [SLEEP] repeatedly until the desired

sleep time is displayed.

•

Each press increases the time by 10 minutes up
to 90 minutes.

•

After 5 seconds, the Sleep Timer setting will
disappear automatically.

•

If you select “SLEEP 0 MINUTE”, Sleep Timer
setting is canceled.

- 13 - EN- 13 - EN

PICTURE CONTROL

SLEEP TIMER

POWER PICTURE

BACK LIGHT SETTING

BRIGHTNESS to decrease to increase

brightness brightness

CONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant
TINT to purple to green

SHARPNESS to soft to clear

- TV SET UP -

CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]

B BACK LIGHT [BRIGHT]

SLEEP 0 MINUTE

TV SECTION

TV OPERATION AND SETTINGS

NOTE

SELECT

EJECT

789

SLEEP

SKIP

REV

SLOW

PAUSE

DISPLAY

CLEAR

MODE

3

+100

0 +10

PLAY

STOP

ENTER

REPEATSEARCH MODE

FWD

MUTEZOOM

MENU

RETURNTITLESETUP

ANGLESUBTITLEAUDIO

VOL.

DISC

A

-

B

PICTURE

BRIGHTNESS

-+

SETUP

ENTER

SETUP

SLEEP

SLEEP

EN - 14 -

You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.

CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents
of news.

TEXT mode: You can watch half screen text informa-

tion if you want.

1-2: You may get these captions or text information

by selecting either “1” or “2”. “2” is usually used for
a second language if available.

•

Not all programs are broadcast with closed cap­tions. Your unit is designed to provide error-free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality sig­nals are likely to result in caption errors or no
captions at all. Common signal conditions which
may cause caption errors are listed below:

–

Automobile ignition noise

–

Electric motor brush noise

–

Weak snowy reception on TV screen

–

Multiplex signal reception displaying picture
ghosts or airplane flutter

•

If the unit displays a black box on the TV
screen, this means that the unit is set to the
TEXT mode. To clear screen, select
“CAPTION1”, “CAPTION2” or “OFF”.

1 Press [SETUP] then press [K] or [L] to point

to “CAPTION”.

2 Press [ENTER] repeatedly to select the

desired caption menu “CAPTION1”,
“CAPTION2”, “TEXT1” or “TEXT2”.

•

If you select “OFF”, Closed Caption System set­ting is canceled.

3 Press [SETUP] to exit the menu.

•

Even if there is a power failure of any
kind, the unit will retain its memory for
this feature.

TO SELECT TV SOUND MODE

1 Press [AUDIO] repeatedly to select the MTS

output mode.

•

The output mode changes as described below
every time you press [AUDIO].

* Second Audio Program (SAP):

Sometimes broadcasters add another channel of
audio to the programs they air. This is usually a
secondary language or perhaps a radio station.

•

After 5 seconds, the current audio status will
disappear from the TV screen.

•

The initial setting is “STEREO”.

•

This setting is saved even if the unit is turned
off or the AC cord is unplugged.

TO CHECK THE SOUND STATUS

By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broad­cast on the unit tuner channel you are watching.

1) When a program is broadcast in stereo,

“STEREO” appears on the TV screen.

2) When a program is broadcast in second audio,

“SAP” appears on the TV screen.

3) When a program broadcast both in stereo and sec-

ond audio, “STEREO/SAP” appears on the TV
screen.

CLOSED CAPTION SYSTEM

- TV SET UP -

CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]

B CAPTION [OFF]

BACK LIGHT [BRIGHT]

- TV SET UP -

CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]

B CAPTION [CAPTION1]

BACK LIGHT [BRIGHT]

MTS (Multi-Channel Television

Sound) System

NOTE

NOTE

STEREO

SAP*

MONO

NOTE

STEREO

AUDIO

SETUP

ENTER

SETUP

CH 123

STEREO/SAP

3)

2)

1)