Swingline LM12-30 User Manual

LM12-30 LSM09-30

LS32-30 LX20-30

Document Shredders Déchiqueteuses Destructoras de documentos

Instruction Manual Manuel d’utilisation Manual de instrucciones

To register this product go to www.swingline.com

Pour enregistrer ce produit, allez sur www.swingline.com

Para registrar este producto visite www.swingline.com

Speciﬁcations

Models Sheet Capacity - Duty Cycle Volts / Hz Amperage CDs and Credit Cards

LS32-30

28-32 sheets Continuous operation 120V AC / 60Hz

11.0A Yes

LX20-30

20 sheets Continuous operation 120V AC / 60Hz

10.0A Yes

Models Sheet Capacity - Duty Cycle Volts / Hz Amperage CDs and Credit Cards

IMPORTANT: ONLY INSERT ONE CD OR ONE CREDIT CARD AT A TIME. Sheet capacity may vary with voltage.

LM12-30

11 sheets Continuous operation 120V AC / 60Hz

10.0A Yes

LSM09-30

9 sheets Continuous operation 120V AC / 60Hz

8.0A Yes

Spéciﬁcations :

Modèles Capacité de coupe - Cycle d’utilisation Volts / Hz Intensité de courant CD et cartes de crédit

IMPORTANT : INSÉREZ SEULEMENT UN CD OU UNE CARTE DE CRÉDIT À LA FOIS. Feuilles mai varient en fonction de la tension.

LS32-30

28-32 feuilles Utilisation continue 120 V CA / 60 Hz 11,0 A

Oui

LM12-30

11 feuilles Utilisation continue 120 V CA / 60 Hz 10,0 A Oui

LX20-30

20 feuilles Utilisation continue 120 V CA / 60 Hz 10,0 A

Oui

LSM09-30

9 feuilles Utilisation continue 120 V CA / 60 Hz 8,0 A Oui

Especiﬁcaciones

Modelos Capacidad de hojas Ciclo de trabajo Voltios / Hz Consumo Tarjetas de crédito y CD

IMPORTANTE: INSERTE SÓLO UN CD O TARJETA DE CRÉDITO POR VEZ. Hojas de capacidad puede variar con el voltaje.

LS32-30

28-32 hojas Operación continua 120 V CA / 60Hz

11.0A Sí

LM12-30

11 hojas Operación continua 120 V CA / 60Hz

10.0A Sí

LX20-30

20 hojas Operación continua 120 V CA / 60Hz

10.0A Sí

LSM09-30

9 hojas Operación continua 120 V CA / 60Hz

8.0A Sí

English………………p.3-8

Français………………p.9-14

Español………………p.15-20

E F G

Models: LS32-30, LX20-30 Models: LM12-30, LSM09-30

1 2 3 4

Indicator Panel

Lights and Icons Explained

Indicator Panel

Anti-Jam Indicator Auto Bin Full Door Open Oil Level Oiling/Auto Color of LED Red Green Blue Red Red Red Green

Power On/Off Switch Auto Mode light light

Forward Mode light light

Reverse Mode light light Jam-free Technology light light

Bin Full light light light Door/Bin Open light light light Self Cleaning of Cutters light light Sleep Mode Auto Oiling in Operation light light Oil Level Indicator light light

Introduction

Thank you for choosing this shredder from ACCO. We are sure it will serve you well, but please take a little time to study these instructions to ensure you get the best out of your machine.

Indicator Panel

Door for Bin

Wheels

Power On/Off Button

Reverse Button

Auto Button

Forward Button

CD Slot

Anti-jam Indicator

Oil Reservoir Cap

Safety First

Shredders are safe to use as long as you take a few safety precautions.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not likely to trip up a passer by.

• Any attempt to repair this unit by unqualied personnel will

invalidate the warranty. Please return to supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do not operate with a damaged power supply cord or plug, after it malfunctions, or after it has been damaged in any manner.

• Do not overload electrical outlets beyond capacity as this can result in re or electrical shock.

• The socket-outlet should be installed near the equipment and should be easily accessible.

• Do not alter the attachment plug. The plug is congured for

the appropriate electrical supply.

Oiling in Operation

Oil Level

Door Open

Bin Full

• Do not use near water.

• Do not use aerosol dusters or cleaners.

• Do not spray anything into the shredder.

• Although this shredder has been designed to be child safe, it is not advised to operate the machine near children and pets.

CAUTION

90%

10%

When moving; shredder may fall over low obstacles.

90%

10%

Shredder Control Panel

ReverseForwardAuto

Safety First - Read instructions before use.

This means you should be careful because long hair can become entangled in the cutting head. This could hurt you.

This means don’t reach into the feed opening of the cutting head. This could hurt you.

This means be careful of ties and other loose clothing which could become entangled in the cutting head. This could hurt you.

This means keep children away from shredder.

This means be careful of loose jewelry which could become

entangled in the cutting head.

This means do not shred CD’s.

This means do not shred credit cards.

This means oil level.

This means oiling in operation.

Door Open Protection

If the door is opened during shredding, as a precaution the

shredder will instantly stop, and the door open symbol on the indicator panel will ash red. To turn back to auto mode simply press the auto button again (F).

Non-Stop Jam Free Anti-Jam Technology

Swingline Shredders will only shred stacks of paper that are

within the shredders sheet capacity. For example, a shredder

with a capacity of 22 sheets will not allow the shredding of

more sheets than this.

Sensors in the paper feed area measure the thickness of paper about to be shredded. The ability to shred or not is communicated through red and green lighting. Green means

that the stack of paper is within the shredders sheet capacity

and OK to shred. Red means that you have too much paper, remove some sheets in order to shred.

Given that you are unable to shred more sheets of paper than the shredder is capable of shredding, paper jams

are prevented.

This prevents time wasted through reversing paper and unblocking jams not to mention the mess it can create.

Rare Occasions of Jamming

In the unlikely event of the shredder jamming, use the reverse function to unblock the shredder.

Alternating between the reverse and forward functions will help unblock the feed area.

Initial Setup of SelfOil™

The shredder is designed to automatically lubricate the cutting mechanism as required to ensure the product continues to work to its maximum performance and to extend the product life. Before turning on the machine for the rst time, please open the oil reservoir cap on the head of the shredder (J) and pour in the 60ml bottle of oil provided as standard. This is sufcient to allow the shredder to start for the rst time and to operate continuously for approximately one hour of shredding before the reservoir will need relling. Press and hold down the Auto button (F) for 5 seconds to start the pump and prime the system. This operation is only required the very rst time the shredder is used. When the ‘Oil Rell’ indicator is illuminated

, ip up the oil reservoir cap (J) and rell the oil reservoir

using a bottle of standard Swingline oil (1760049). The automatic oiling operation lasts approximately 2 seconds and you will hear the distribution pump during this time. Autooiling operates after 15 minutes of shredding.

CAUTION

We only recommend the use of Swingline shredder lubricant to maintain optimum performance and safety. ACCO accepts no liability for product performance or safety if anything other than Swingline branded shredder lubricant is used (Order Code 1760049).

WARNING Do not use ﬂammable oil.

Only Swingline part number 1760049 is recommended.

Operation

• LS32-30 & LX20-30 only. After unpacking the product,

pull out the shredder bag frame and remove the CD shard tray, which sits on top of the bag frame. Store this tray on the bag frame as shown and use when you shred CD’s or

credit cards to separate waste for recycling. On the

LM12-30 and LSM09-30 high security models, the CD tray can be left permanently in position in the shredder.

• Flip up the oil cap and ll up the reservoir using the 60ml

bottle of oil provided*. Close the cap.

• Connect shredder to mains supply.

• Check that the on/off switch at the back of the machine is

switched to the ‘ON’ position.

• Press and hold down the Auto button (F) for 5 seconds to

start the pump and prime the system. Only required when the product is used for the rst time.

• To commence shredding, press the auto feed button. This

sets the shredder into auto mode.

• Insert paper to be shredded into the feed area. The

shredder will detect the paper and start automatically.

• If the shredder is left in auto mode for more than 2 minutes

without being used, the shredder will automatically turn back to standby mode in order to save power.

• The shredder will automatically ‘wake up’ from sleep mode

when paper is inserted into the shredder mouth. There is no need to press the Auto button (F).

* Replacement oil bottle No. 1760049

CD and Credit Card Shredding

• A separate CD tray is provided to collect the shredded CD

shards. On the LS32-30 and LX20-30, ensure that this is

correctly mounted onto the standard shredder bag frame before shredding CD’s or credit cards. The LM12-30 & LSM09-30 models are supplied with a separate CD bin, which ts on the front of the bag frame. CD and credit card shards should be disposed of separately from paper.

LS32-30/LX20-30 LM12-30/LSM09-30

• Always shred CD’s and credit cards through the safety

guard slot (H). Only shred 1 credit card or 1 CD at a time.

• Empty the CD tray or CD bin after 8 credit cards or CD’s to avoid waste spilling over into the paper waste bin.

LS32-30 & LX20-30 only. Remove the CD tray before

starting to shred paper again and store on the bag frame.

Bin Full

When the bin is full the shredder will not function and the bin full symbol will illuminate red.

When this happens you must empty the bin.

• Open the door and slide out the shredder bag support frame. Carefully remove the shredder bag from the frame.

Once the shredder bag has been disposed of and replaced, close the door and press the auto button to resume shredding.

Note: LX20-30, LM12-30, LSM09-30 Models - Once the

shredder bag has been reinserted and/or cabinet door has been closed, the shredder will run in reverse for two seconds,

stop for two seconds and then forward for two seconds to

clear away any remaining paper from the cutter mechanism. This ‘self-cleaning’ mechanism is additional jam prevention technology from ACCO.

Shredder Accessories

Use Swingline shredder bags to recycle shredded paper (1765021) or plastic shredder bag (1765015). There are instructions on the paper shredder bag on how to t it to the internal bag support frame. A complimentary oil bottle and shredder bag is included with the shredder.

Service

We recommend these machines are serviced every 6-12 months by an ACCO service engineer - see the back of this booklet for the contact details of your local service center.

+ 15 hidden pages