- 9 -
CX30-55 • CS50-59 • CX40-59
CS50-59, CX40-59, CHS10-30
EN Installing the oiler:
(Only for CS50-59, CX40-59, CHS10-30)
•
take the oiler holder out of the cabinet
and hook it into the side of the
cabinet (A).
•
Remove the lid from the oiler (B).
•
Remove the plastic bag from the oil
tube (C).
•
put the oil tube into the oiler and
screw on (D).
•
The oil bottle has a fill level indication (E).
FR Installation du récipient d’huile :
(Uniquement sur les modèles
CS50-59, CX40-59, CHS10-30)
•
Retirer le système de fixation du
récipient du coffre et l’accrocher sur le
côté du meuble (A).
•
Enlever le couvercle du récipient (B).
•
Retirer le sac plastique du tuyau (C).
•
Introduire le tuyau dans le récipient et
fermer le récipient (D).
•
Niveau de remplissage indiqué sur le
récipient (E).
SP Instalación del depósito lubricante:
(Solo la CS50-59, CX40-59, CHS10-30)
•
saque el soporte del depósito lubricante
fuera del contenedor con ruedas y fíjelo
al lateral del mismo (A)
•
retire el tapón del depósito (B).
•
Retirar la bolsa de plástico del tubo de
aceite. (C).
•
Coloque el tubo en el depósito de
lubricado y atornille a presión (D).
•
La botella de aceite tiene un
Fullstandsanzeige (E).
•
Installation • Montage • Instalación
•