User’s Guide
SS-42K15
SS-50K15
SS-58K15
SS-65K15
www.swedx.com
Design and specifications are subject to change without notice.
SWEDX wave SWEDX TV-Stand
SWEDX offers a wide
range of LED-TVs and
digital signage products
and its accessories. For
more information please
visit
www.swedx.com
SWEDX Direct
ﺔﯾﻟزﻧﻣ ﺎﻣﻧﯾﺳ
SWEDX Soundbar
SWEDX shelves
SWEDX Blade
SWEDX Matrix Screens
Design and specifications are subject to change without notice.
Wooden Wall-mount
INDEX Page
Introduction 4
Safety precaution 4
Basic operation 5
Contents 6
Control buttons 6
Inputs 6
Remote Control Notice 7
Remote control buttons 8
Main Operations 9
Volume Control 9
OSD Menu Operations 9
OSD Menu Structure: 9
Menu > OPTION 10
Menu > Channel 11
Menu > Picture 15
Menu > Sound > Sound 15
Menu > Time 16
USB Media Player 17
Supported file formats and codecs 18
Text-TV / Teletext 19
Product base assembly 20
Wall mount assembly 21
Troubleshooting 22
Warranty and Service 23
How to get service 24
Limitation of liability 24
Design and specifications are subject to change without notice.
3
Introduction
Thank you for choosing SWEDX LED/LED-TV.
Please read this manual thoroughly before
operating the product. Make sure the display was
not damaged in transit. Should the product be
damaged, please contact your dealer and do not
install it. Check that you have all the accessories
according to the model.
Safety precaution
• Do not place the product on unstable places,
from which it may fell off
• Do not expose the product to extreme
temperature and humid environment
• Avoid subjecting the product to direct sunlit
and other heat sources
• Do not put the product into any liquid
• Do not put anything inside the product, or
place water container on top of the it
• In thunder rainy days (especially with
lightening), please unplug the power and
antenna cables
• Do not step on the power cable, or tangle
them together
• Avoid overload of the exterior electric outlet
to prevent fire hazard of electric shock
• Clean the product with dry and soft fabric
• lf your product is broken, do not repair it by
yourself, but contact the maintenance
personnel
• lf the remote control is left unused for a
longtime, please take the batteries out and
store them in dry places
• Avoid dropping the remote control
• lf the product is installed for exhibition
purpose, please do not place the overheated
part on the ground or carpet to prevent
accident
• The apparatus shall not be exposed to
dripping or splashing and that no object filled
with liquids, such as vases, shall be placed
on the apparatus
• Where the MAINS plug or an appliance
coupler is used as a disconnect device, the
disconnect device shall remain readily
operable
• Battery shall not be exposed to excessive
heat such as sunshine, fire or the like
• Excessive sound pressure from earphones
and headphone can cause hearing loss
2. This device must accept any interference
received, including interference that may
cause undesired operation
Please disconnect the power cord if this
equipment will not be used for a long time.
Precautions When Displaying a Still Image
A still image may cause permanent damage to
the screen
• Do not display a still image on the screen for
more than 2 hours as it can cause screen
image retention. This image retention is also
known as "screen burn". To avoid such image
retention, reduce the degree of brightness
and contrast of the screen when displaying a
still image
• Watching the screen in 4:3 format for a long
period of time may leave traces of borders
displayed on the left, right and center of the
screen caused by the difference of light
emission on the screen. Playing a DVD or a
game console may cause a similar effect to
the screen. Damages caused by the above
effect are not covered by the Warranty.
• Displaying still images from Video games and
PC for longer than a certain period of time
may produce partial after-images. To prevent
this effect, reduce the ‘brightness’ and
‘contrast’ when displaying still images
WARNING
To prevent the spread of fire, keep candles or
other open flames away from this product at
all times
Please install the product at proper position, such
as wall or ceiling. Please install it under the
guidance of professional staff.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference
Design and specifications are subject to change without notice.
4
Basic operation
• Use AC 100-240V 50~60 Hz power outlet for
the product power supply.
• lf the screen of the product is not on, please
press the power button on the remote control
or on the product.
• lf you want to shut off the product temporary,
please press the power button on the remote
control.
• lf you want to shut off the product completely,
please disconnect the power cable.
• In all modes except PC mode, the product
will enter idle state if there is no signal input
within 3 minutes.
• ln PC state, the product will enter idle state if
there is no signal input within 2 minutes.
• The setting and tuning of picture and sound
will be saved when the product is shut off,
which will be working in the pre-shut off state
when the product is turned on again.
• lf PC signal source is used, please first set
the resolution of the PC display card as the
following modes:
For HDMI (3840x2160 @ 30Hz)
For PC (1920 x 1080 @ 60Hz)
• lf there is progressive output of the signal
used by the user, signal source with
progressive output is recommended.
Preparation
• Put the product on a stable surface.
• Do not fix the product with others fixations than
those provided or suggested by the
manufacturer.
• If you have a wall mount, check that it is
steady.
• Do not place any material on the product.
• Do not block or cover the ventilation
openings on the product.
• The product must be plugged with a tension
source of 110-240 volts and 50~60 Hz.
• Power cord and cables must be properly
routed and protected to prevent from
stepping on them.
• Keep the power cord away from any heat
source. Possible fire hazard.
Heating sources and humidity
• Keep the product dry and away from
humidity.
• Keep the product away from heat sources.
Cleaning and maintenance
• Unplug the product before cleaning it. Do not
use solvents or liquids to clean the product.
• Only clean the product with a soft and dry
fabric.
• In case of troubleshooting, do not use spare
parts other than those suggested by the
manufacturer. Using inadequate spare parts
can lead to electric shocks, short-circuits fire
or others incidents. Please contact a
technical authorized by SWEDX brand.
Departure in holidays
• Unplug the product during lightning storms or
when unused for long periods of time.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUC E THE RIS K OF ELE CTRIC S HOCK, D O NOT
REMOVE COVER( OR BACK ). REFE R SERVIC ING TO
QUALIF IED SERV ICE PER SONNEL
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
Design and specifications are subject to change without notice.
5
Contents
Included items:
Notice! / Information
Inputs
1. YPBPR
Input for Component/YPBPR
2. CI-Module
Input for CA-module (card reader)
2 x CR2025 Battery
INFO
9
G
C
P
E
H
.
L
I
S
T
OK
F
A
V
VOL
CH
ARC
AUDIO
HDMI
SUB.T
USB
V/
R
ADIO
AV
TV
Notice
Remote Control LED/LED-TV
AC Cable
Base + Screws
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
CR 2025 Battery
CAUTION
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the like.
CR 2025 Battery
3. AV
Input for audio/video sources, 3.5 mm plug
*Component/YPBPR and AV shares the same
audio input
4. USB
Input for USB Media Player/Firmware upgrade
5. HDMI 1,2 and 3
Input 1,2 and3 for HDMI sources
6. Power Input
Input for 100-240 V power 50~60Hz
7. Headphone
Output for headphone devices
8. PC Audio
Input for PC audio when PC input is connected
9. PC
Input for PC or VGA sources
10. SCART
Input for SCART sources
11. DTV/TV
Input for DVBT/T2/C and analog TV signal
12. Digital Audio
Output for digital audio signal (coaxial)
1 2 3 4 5
7
Design and specifications are subject to change without notice.
6
6
128 9 10 11
Remote Control Notice
The remote control included is based on 2.4 GHz
and infrared. To switch between 2.4 GHz and
infrared do the following:
Press and hold for 5 seconds.
The red LED lamp will flash and alter the
current mode. When pressing any key on the
remote control the correspondent LED lamp will
it. In 2.4 GHz mode the LED lamp will lit red and
in Infrared mode the LED lamp will lit blue.
When the remote is in 2.4 GHz mode it can be
used without targeting the screen because the
receiver is built in. Each screen has a paired
remote control meaning that if you have several
screens the remote control will apply to the
paired screen only and will not apply to any other
screen.
If for some reason you need to pair the remote
with the screen do the following:
1. Connect the screen to power outlet
2. Press buttons on the remote control
OK
simultaneously for about 4 seconds
The red lamp on the top edge of the remote will
flash indicating that the remote is paired with the
screen.
VOL
9
L
.
I
S
H
T
C
F
OK
A
V
CH
G
P
E
ARC AUDIO SUB. TV/RADIO
USB
HDMI
Design and specifications are subject to change without notice.
Design and specifications are subject to change without notice.
7
AV TV
Remote control buttons
1. On/Off button
2. Number buttons for
direct channel access
3. Display additional
information
4. List TV-channels
5. EPG (Electronic
Program Guide)
6. Navigation button UP
7. Navigation/adjust button
LEFT
8. Menu display. In OSD
sub-menu press to
access previous menu
9. Available sources
selection
10. Picture freeze
11. Volume increase
12. Volume decrease
13. Enter sleep mode in
certain chosen time
14. Start/Pause play,
Start/Paus time
shift/alter Teletext mix
15. Stop play/activate
Teletext
16. Fast forward/Teletext
index
17. Fast backward/ Teletext
cancel
18. Fast-text topic selection
in Teletext GREEN
19. Fast-text topic selection
in Teletext RED
20. Choose Audio/ language
in DTV/USB media
player
21. Aspect Ratio selection
22. Shortcut to USB
23. Shortcut to HDMI1,2,3
24. Mute the built-in
speakers
25. Previous TV channel in
DTV/TV
26. Display favorite channels
list
27. Confirm/activate button
28. Navigation/adjust button
RIGHT
29. Exit the OSD
30. Navigation button
DOWN
31. Next channel. When
the channel list is
displayed, it scrolls
down to next page in
the list
32. Previous channel.
When the channel list
is displayed, it scrolls
up to previous page in
the list
33. Instant Recording/
Teletext size selection
34. Display Recorded
List/Hold Teletext
35. Previous Title/Display
time in Teletext
36. Next Title and Reveal
Teletext
37. Fast-text topic
selection in Teletext
Yellow
38. Fast-text topic
selection in Teletext
Blue
39. Activate subtitles in
DTV/USB media
player
40. Alter TV/Radio
Channels mode
41. Shortcut to AV
42. Shortcut to DTV/TV
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
G
P
E
VOL
ARC AUDIO SUB. TV/RADIO
USB
HDMI
C
H
OK
.
L
I
S
T
AV TV
24
9
25
F
A
CH
V
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Design and specifications are subject to change without notice.
8
Loading...