Swann SW346-7MC, PNP-51 Operating Instructions Manual
7” LCD Screen with
™
™
Advanced security made easy
PNP-51
SW346-7MC
www.swannsecurity.com
Operating Instructions
SR346-7MC-60100-131109
1
222
Before You Begin
FCC Verification:
NOTE: This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna
· Increase the separation between the equipment and the receiver
· Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
· Consult the dealer or an experienced radio/TV technician for help
IMPORTANT NOTE: Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under lawful
authority, no person shall use, either directly or indirectly, a device operated pursuant to the provisions of this Part for the purpose of overhearing or recording the
private conversations of others unless such use is authorized by all of the parties
engaging in the conversation.
WARNING: Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS:
· Make sure product is fixed correctly and stable if fastened in place
· Do not operate if wires and terminals are exposed
2
3
Table of Contents
Before You Begin 2
Table of Contents 3
Package Contents 3
Overview 4
Layout of Remote Control 4
Layout of Monitor and Camera 5
Connection Guide 6
Mounting 8
Using the Menus 9
Additional Functions 10
Troubleshooting 11
Technical Specifications 11
Technical Support Rear Cover
Warranty Information Rear Cover
Package Contents
7” Color LCD Monitor and Accessories
PNP-51 Camera and Stand
Video Cable 3ft / 1m
RCA Cable 60ft / 18m
Power Adaptors
Remote Control
Mounting Screws and Plugs
Operating Instructions
Theft Deterrent Stickers x 4
3
444
Overview
Congratulations on your purchase of this Swann 7” Monitor and Camera package!
You’ve chosen a simple and versatile monitoring system. Featuring both audio and
video, this kit represents a great entry level monitoring solution. Additionally, the
included PNP-51 features night vision, with a range of approximately 16 feet/5m.
Suggested applications for the 7” Monitoring Kit include use as a baby monitor,
as a door or hallway camera, or to be combined with a video recorder for a basic
CCTV/recording system.
Layout of Remote Control
VOL + / -: Increases or decreases the audio volume of the
speakers or the headphone output.
MUTE: Turns off the audio output. Press again or VOL +
to un-mute.
MENU: Opens the on-screen menu system, or goes up one
step from a submenu.
POWER: Switches between “Standby” mode and “ON”.
MODE: Switches between available video modes - Stand-
ard, Soft, Vivid, Light and Personal. Note that “Mode” on
the remote control operates in a very different manner to
“Power/Mode” on the monitor.
CALL: Displays which AV input is currently being displayed.
TIMER: Set the automatic Sleep time - this is the amount
of time the monitor will stay on before automatically going
to Standby mode (up to 120 minutes).
LANG: Change the on-screen language.
CALE: To set up the calender (date) functions.
AV: Selects your input (either AV1 or AV2).
: Flips the image sideways (mirror image).
: Flips the image vertically (upside down).
: Changes the aspect ratio of the image. You can either
use the full 16:9 screen (widescreen) or a 4:3 window in
the centre (standard TV).
Loading...