Swann ONE Quick Start Manual

Welcome

What's in your Kit?

Technical Support

Congratulations on your purchase of the SwannOne™

Advanced Smart Home Control Kit - the complete alarm

& video monitoring security with appliance & energy
management for larger homes & businesses in one simple
solution.

This guide introduces the exciting things in your SwannOne

Advanced Smart Home Control Kit and shows you how to

get devices up and running right away.

QSGD080415E© Swann Communications 2015

FCC Statement

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)These devices may not cause harmful interference, and (2) These devices must accept any
interference received, including interference that may cause undesired operation.

SwannOne Warranty

Your SwannOne products are backed by a full 12 month guarantee from the date of purchase. In the
unlikely event of anything going wrong, you can have confidence that your purchase is protected. Refer to
swannone.com for terms and conditions.

Advanced Smart
Home Control Kit

Disposal and Recycling Information

Correct Disposal of this product. This marking indicated that this product should not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for
environment safe recycling.

Get more information regarding the setup and use of your
SwannOne products on the web at swannone.com, or
contact our multi-lingual support team anytime via:

[e-mail]

USA & Canada 1800 627 2799

UK & Europe 0808 168 9031

Australia 1800 788 210

New Zealand 0800 479 266

Smart Hub

The wireless multi-platform
Smart Hub enables control of
all your SwannOne devices
from your smartphone.
Complete with internal battery
backup and USB charging
ports, the Smart Hub has a
built-in microphone to listen
out for glass breakage.

Key Fob

Motion & Window / Door Sensors

The Motion Sensor detects
movement in a surrounding area
while the Window/Door Sensor
is a magnetic two-piece device
that helps you monitor the
opening and closing of doors and
windows.

The Key Fob Remote Control allows
you to activate Home, Away and
Night modes without the need for a
smartphone.

Smart Plug

The Smart Plug allows you to
turn on or off any connected
electrical appliances remotely
via your smartphone.

SoundView Indoor Camera

The SoundView Indoor Camera
monitors the inside of your home
and records events whenever
motion or sounds of interest are
detected and notifies you on your
smartphone.

Quick Start Guide

EN

READ ME

FIRST

Prepare Devices Create Account

Install Devices

Download App

Connect your Smart Hub to the Internet and a power outlet with
the included Ethernet cable and power adapter.

The sticker on the base of
your Smart Hub contains
the information you need to
register your Hub.
Take note of the MAC ID.

MAC ID: __ __ – __ __ – __ __ – __ __ – __ __ – __ __

INPUT:5V 2A

This device co mplie s with Pa rt 15 of th e FCC Rul es. Ope ratio n is subj ect to th e

MAC ID:XX -XX-X X-XX- XX-XX

FCC ID:VM ISWO- HUB01 K

S/No:XX XXXMM YYXXX XX

Model:S WO-HU B01K

IC:XX123A-B12 34567 890

Each USB: 5V 500m A

MAC ID:XX -XX-X -XX-XX- XXX

Stay connected and manage your
SwannOne Smart Home system wherever*
you are. Receive sensor alerts, control
appliances, watch what's going on, and
much more.

Simply download the SwannOne app for iOS
or Android on your smartphone or tablet
from the Apple App Store or Google Play.

Batteries are pre-fitted inside your devices.
To activate, remove the cover and pull the battery tab.

Plug each device into a power outlet. For the camera, connect with
the included power adapter and USB cable.

Smart Hub

Key Fob and Motion & Window/Door Sensors

Smart Plug and SoundView Indoor Camera

Follow these simple steps to set up your Advanced Smart Home Control Kit

1 2

43

Broadband Router

Ethernet

Speaker &

Mic

Power

Battery

Tab

Connect

Button

USB

Reset

WPS

Jot it down here!

AAA

AAA

SwannOne products are designed to be easy to set up. However, if at any
time you need help or get stuck, please visit swannone.com/faq where
you can find answers to frequently asked questions & more.

* Internet connection required.

Before you can install your kit, you must create a
SwannOne account. Your SwannOne account is
what you use to control and manage your
SwannOne devices and services.

Go to home.swannone.com using your web
browser, and sign up for a SwannOne account.

Top Tips

• We've designed the hub to look stylish next to any decor, so feel free to move it around
once it's connected to Wi-Fi. As long as the hub is within coverage of your wireless router,
it will automatically reconnect.

• The strongest possible overall coverage for all your SwannOne devices is achieved when
the hub is placed somewhere in the middle of your home. Try to keep it away from metal
barriers, microwaves and Bluetooth devices as they may potentially cause interference.

• Using integrated audio analytics technology, the hub can detect a variety of sounds such
as glass breakage. For sounds to be processed and classified correctly, avoid placing the
hub next to devices generating humming noises such as fans and computers.

• Customize and expand your SwannOne system easily at any time via your SwannOne
account web dashboard. From cameras and sensors, to power plugs and locks - you can
keep adding products as your needs change.

Power Button /

Status LED

Log in to your new SwannOne account
at home.swannone.com. The first time
you sign in, you will be prompted to
choose the devices to install. When
you have your devices selected and are
ready to begin, click "Install" and then
follow the on-screen instructions to:

• set up the hub and camera

• connect to a wireless network

• pair devices such as the key fob
smart plug, and sensors

• perform walk-tests to check devices
are working correctly

MAC ID: __ __ – __ __ – __ __ – __ __ – __ __ – __ __

(Your power adapter may
look different, depending

on your location)

Peel off the clear film
protecting the lens

INPUT:5V 2A

MAC ID:XX- XX-XX -XX-X X-XX

FCC ID:VMI SWO-H UB01K

S/No:XXX XXMMY YXXXX X

Model:SW O-HUB 01K

IC:XX123A-B123 45678 90

Each USB:5 V 500mA

MAC ID:XX- XX-X -XX-XX-XXX