Swann NVRx-7300 series Quick Start Manual

11

NVR Quick Start Guide

• Getting to know your NVR

• What does this mean?

• Connect your Cameras

• Connect the NVR to your Local Network

• Connect the Mouse

• Connect the NVR to your HDTV

• Connect the NVR to your Monitor

• Connect the Power Adapter

QH_7300H040416E | © Swann 2016

Welcome! Lets get started.

READ ME

FIRST!

2

Getting to know your NVR

Congratulations on the purchase of your Swann NVR. This quick start guide will assist you on getting your NVR up and
running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent
installation, to make sure nothing was damaged during shipping.

1) Power

2) Audio Out

3) USB

4) HDMI

5) VGA

6) eSATA

7) LAN

8) Camera In-

puts

9

10

11

12

13

9) IR Receiver

10) Power LED

11) HDD LED

12) LAN LED

13) USB

AUDIO

OUT

eSATA

LAN

VGA

HDMI

DC 48V

USB

1 3 5 7

2 4 6 8

1 2 3 4 5 7

6

8

3

Here are explanations for the various connections and
lights on the NVR -

1) Power - This is where you connect the power adapter.

2) Audio Out - For connecting speakers.

3) USB - Connect the mouse here.

4) HDMI - If you have a digital TV with HDMI input, connect

this to an available input.

5) VGA - If you have a digital TV or a monitor with VGA

input, connect this to an available input.

6) eSATA - An easy way to connect an additional Hard

Drive for extra storage.

7) LAN - Connect this to your home network so your NVR

can connect to the Internet.

8) Camera Inputs - Plug the camera cables here.

9) IR Receiver - Receives a signal from a remote control

(not included).

10) Power LED - When the NVR has power, this light will

turn on.

11) HDD LED - This will flash when the hard drive is

working.

12) LAN LED - This will flash when there is network activity.

13) USB - Able to connect a Flash Drive to copy recorded

events or to perform firmware upgrades.

What does this mean?