Swann Mobile viwer Installation Manual

Help Desk / Support Details

Swann Technical Support

All Countries E-mail: [e-mail]

Telephone Helpdesk

UNITED STATES toll free

877-274-3695

(Sun-Thurs, 2pm-10.30pm PST)

800-627-2799

(Mon-Fri, 9am-1pm PST)

USA Exchange & Repairs

562-777-2551

(Mon-Fri, 9am-5pm PST)

AUSTRALIA toll free

1300 13 8324

(Mon-Fri, 9am-5.30pm Aus EST)

International

[phone]

(Mon-Fri, 9am-5.30pm Aus EST)

See http://www.worldtimeserver.com for information on different time

zones and the time in Melbourne Australia compared to your local time.

English

Mobile Viewer

2.5” LCD Color Screen
4 Channel Receiver

with Audio

Warranty Information

Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the product to Swann’s repair centres. The
end user is responsible for all shipping costs incurred when shipping from and to any country
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this product. Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the product only and is not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence of misuse
or abuse of the device will render all warranties void.

www.swannsecurity.com

8

If this device does not work when you first plug it in,
do not take it back to the store.

Contact the Swann Helpdesk using our fast e-mail service
[e-mail] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.

Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)

Note: Wireless Networks (WiFi) may interfere with and/or experience interference caused by
the transmitterin this unit. Changing the receiver to another channel/frequency or setting the Wireless
Network (i.e. Wireless Access Point) to a frequency further away from the camera’s set frequency can
alleviate this problem. Consult the documentation of your Wireless LAN device for information on how
to change the transmission frequency. These cameras work with most wireless camera receivers that
support 2414MHz, 2432MHz,

Installation Guide

Index

Technical Specifications

Introduction
Mobile Viewer comes with...
Installing Mobile Viewer
Receiver Features
Important Information about this product
Troubleshooting, Hints & Tips
Technical Specifications

Back Cover

Help Desk / Support Details
Warranty Information

Back Cover

Back Cover

Back Cover

Introduction

The Swann Mobile Viewer incorporates the latest in advanced technology. We feel confident that you will
be pleased with the quality and features of this product.

The Swann Mobile Viewer allows you to receive pictures from a suitable wireless camera with ease. As the
radio waves it uses have a frequency of 2.4GHz, they can be received within a radius of up to
330ft/100m in open line of sight, depending on the capabilities of your camera / transmitter.

Please note: The Swann Mobile Viewer receives video that is broadcast in the public domain.
The video signal is not encrypted and could potentially be viewed by anyone with a similar

2.4GHz receiver unit. Please keep this in mind when positioning and using any wireless camera
equipment.

2

2

2

2

3

3

4

4

5

5

6

6

7

7

LCD Specifications

Screen Type: TFT
Screen Size: 2.5” Diagonal
Resolution: 480x234
Minimum View Angles: U/D/L/R - 10°/30°/45°/45°
Contrast: 150:1
Video output: 1V p-p @ 75 ohm
Audio output: 1Vp-p @ 600 ohm

RF Specifications

Receiving Channel Frequency: Channel 1 ~ 2414MHz, Channel 2 ~ 2432MHz

Channel 3 ~ 2450MHz and Channel 4 ~ 2468MHz

Intermediate Frequency: 480MHz
Frequency Stabilisation: ±100KHz
Receiving Sensitivity: < -85dBm
Antenna: In-Built
Operating Power: 5V DC 2Amp
Power Consumption: 700mA
Operating Temperature: 32°F ~ 113°F / 0°C ~ 45°C @ <85%RH
Size: 5” x 3 / ” x 1½” / 130 x 80 x 38mm

5

32

Weight: 8¾oz / 250g

FCC Notice

Mobile Viewer comes with ...

• 1 x Mobile Viewer Wireless 2.4GHz Receiver with LCD screen

• 1 x Li-Ion Battery for Mobile Viewer

• 1 x Mains Power Adaptor for Mobile Viewer

• 1 x Recharger Base

• 1 x Car Cigarette lighter Power Adaptor for Recharger Base

• A/V socket to RCA adapter Cable

• Earphone

• This Instruction Sheet

If any of these items are missing, please contact your retailer.

FCC NOTICE

This device co mp li es w ith Part 15 of FCC Rules.
Operation is s ub je ct t o the following conditi on s:
(1) This device ma y no t ca use harmful interfere nc e, a nd
(2) this device mu st a cc ept any interference re ce iv ed ,
including in te rf er ence that may cause undes ir ed o peration

2 7

We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare under our sole
responsibility that the product:

SW-G-MVIEW

To which this declaration relates:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CE Notice

This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive 89/336/EEC and
R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is authorized to bear CE mark.