Swann MicroCam II User Manual

Help Desk / Support Details

Swann Technical Support

All Countries E-mail: [e-mail]

Telephone Helpdesk

UNITED STATES toll free

877-274-3695

(Sun-Thurs, 2pm-10.30pm PST)

800-627-2799

(Mon-Fri, 9am-1pm PST)

USA Exchange & Repairs

562-777-2551

(Mon-Fri, 9am-5pm PST)

AUSTRALIA toll free

1300 13 8324

(Mon-Fri, 9am-5.30pm Aus EST)

[phone]

(Mon-Fri, 9am-5.30pm Aus EST)

See http://www.worldtimeserver.com for information on different time zones

and the time in Melbourne Australia compare to your local time.

English

MicroCam III

Wireless Security Camera

With 4 Channel Auto-Switching Receiver

International

Warranty Information

Swann Communications warrants this product against defects in workmanship and material for
a period of one (1) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
end user is responsible for all shipping costs incurred when
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.

Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.

product

product The

shipping from and to any country

product

www.swannsecurity.com

8

If this device does not work when you first plug it in,
do not take it back to the store.

Contact the Swann Helpdesk using our fast e-mail service
[e-mail] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.

Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)

Note: Wireless Networks (WiFi) may interfere with and/or experience interference caused by the
transmitter in this unit. Changing the receiver to another channel/frequency or setting the Wireless
Network (i.e. Wireless Access Point) to a frequency further away from the camera’s set frequency can
alleviate this problem. Consult the documentation of your Wireless LAN device for information on how
to change the transmission frequency. These cameras work with most wireless camera receivers that
support 2414MHz, 2432MHz, 2450MHz and 2468MHz.

Installation Guide

Index Technical Specifications

Introduction
MicroCam III comes with...
Installing MicroCam III
Receiver Features
Camera Features
Important Information about this product
Troubleshooting, Hints & Tips
Technical Specifications

Back Cover

Help Desk / Support Details
Warranty Information

Back Cover

Back Cover

Back Cover

Introduction

The Swann MicroCam III incorporates the latest in advanced technology. We feel confident that you will
be pleased with the quality and features of this product.

The Swann MicroCam III allows you to transmit pictures with ease. As the radio waves it uses have a
frequency of 2.4GHz, they can be received within a radius of up to 328ft/100m in open line of sight. The
MicroCam III comes with 2 power sources (9V battery adaptor and mains adaptor) so that you have the
option of using different power methods for different locations and conditions, to ensure that you have the
best options for your situation.

Please note: The Swann MicroCam III broadcasts video in the public domain. The video signal
is not encrypted and could potentially be viewed by anyone with a similar 2.4GHz receiver
unit. Please keep this in mind when positioning and using any wireless camera equipment.

2

2

2

2

3

3

4

4

4

4

5

5

6

6

7

7

MicroCam III CMOS Colour Camera

Sensor: 1/3”(8.5mm) Colour CMOS

Horizontal

Auto Electronic Exposure: 1/60 - 1/15000 sec.

Minimum Illumination: 3 Lux@ f1.2

Signal to Noise Ratio: >48dB

Board Lens:

View Angle: 60 degrees

Size:

Video System: PAL 50Hz (Australia, UK/Europe), NTSC 60Hz (USA and Canada)

Automatic Exposure / Gain / White balance.

MicroCam III 2.4GHz Transmitter

Fixed Channel: 2450MHz Frequency band

RF Output Power: CE, FCC and C-tick compliant

Operating Power: 8V DC

Power Consumption: 100mA

Size:

Antenna: Omni-directional

Transmitting Range: Up to 328ft / 100M line of sight

Weight: 20 grams

Operating Temperature: 32° ~ 122°F /

We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare
under our sole responsibility that the product:

Resolution: 380 TV lines

7

/ ” ~ 5.6mm

32

5 23

/ x / ” ~16mm x 18mm, board lens

8 32

7 7

/ ” x / ” x 1” / 22 x 22 x 25 mm

8 8

3

/ oz /

4

0° ~ 50°C

FCC Notice

MicroCam III 2.4GHz Receiver

Frequency: 4 Channels in 2.4 GHz

Video input/output: 1V p-p @ 75 ohm

Audio input / output: 1Vp-p @ 600 ohm

Antenna: 50ohm SMA

Operating Power: 8V DC

Power Consumption: 150mA

Size: 3½” x 2¾” x / ”

frequency band*

5

89 x 70 x 15mm

8

SW-P-MC3

To which this declaration relates:

MicroCam III comes with ...

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

• 1 x MicroCam III Miniature Color Camera / 2.4GHz Transmitter

• 1 x MicroCam III 2.4GHz Receiver

• 1 x Antenna for MicroCam III 2.4GHz Receiver

• 1 x 9v Battery Snap for Transmitter/Camera (battery not included)

• 2 x Mains Power Adaptor (8V for use with MicroCam III and Receiver)

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• A/V socket to RCA adapter Cable

• Metal Camera stand

• This Instruction Sheet

If any of these items are missing, please contact your retailer.

FCC NOTIC E

This device c omplies with Par t 15 o f FCC Rules.
Operation i s subject to the foll owing condition s:
(1) This de vi ce may not cause ha rm ful interfere nc e, and
(2) this de vi ce must accept an y in terference re ce ived,
including i nterference tha t may cause undesir ed operation

2 7

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CE Notice

This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC Directive
89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the authority concerned and is
authorized to bear CE mark.