Swann 16CH, 8CH (D), 16CH (D), 4CH, 4CH (D) User Manual

...

User

User’’

s Manual

MPEG4 DVR SERIES_V0.989

Please read instructions thoroughly before operation and retain it for future reference.

150

16CH / 8CH / 4CH

4CH

16CH / 8CH / 4CH Built

16CH / 8CH / 4CH Built--

in DVD

in DVD--

RW Writer or CD

RW Writer or CD--

RW Writer

IMPORTANT SAFEGUARD

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CE Mark

This apparatus is manufactured to comply with the radio interference requirements.

CAUTION:

CAUTION: To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

CAUTION

RISK OF ELECTRIC SHOCK

Note: Any changes of AP, please refer to your distributor.

Note: Any changes of this manual made to the actual product are subjects to no further notification.

Note: Version: 1042-09-H6-04-AA-08 ; 0030

TABLE OF CONTENTS

PARTS AND FEATURES

1.1 FEATURES -------------------------------------------------------------------------------------------------------------------------

1.2 PACKAGE CONTENTS ---------------------------------------------------------------------------------------------------------

1.3 SPECIFICATION ------------------------------------------------------------------------------------------------------------------

1.4 FRONT PANEL --------------------------------------------------------------------------------------------------------------------

1.5 REAR PANEL ----------------------------------------------------------------------------------------------------------------------

GETTING STARTED

2.1 GETTING STARTED -------------------------------------------------------------------------------------------------------------

BASIC OPERATION

3.1 RECORDING -----------------------------------------------------------------------------------------------------------------------

3.2 PLAYBACK -------------------------------------------------------------------------------------------------------------------------

DETAILED MENU CONFIGURATION

4.1 MENU TREE ----------------------------------------------------------------------------------------------------------------------

4.2 MAIN MENU OPTIONS_ RECORD -----------------------------------------------------------------------------------------

4.3 MAIN MENU OPTIONS_ TIMER --------------------------------------------------------------------------------------------

4.4 MAIN MENU OPTIONS_ DATE ---------------------------------------------------------------------------------------------

4.5 MAIN MENU OPTIONS_ ADVANCE ---------------------------------------------------------------------------------------

4.6 ADVANCE MENU_ CAMERA ------------------------------------------------------------------------------------------------

4.7 ADVANCE MENU_ DETECTION -------------------------------------------------------------------------------------------

4.8 ADVANCE MENU_ DISPLAY ------------------------------------------------------------------------------------------------

4.9 ADVANCE MENU_ ALERT -----------------------------------------------------------------------------------------------------

4.10 ADVANCE MENU_ REMOTE ------------------------------------------------------------------------------------------------

4.11 ADVANCE MENU_ SYSTEM -------------------------------------------------------------------------------------------------

4.12 ADVANCE MENU_ NETWORK ---------------------------------------------------------------------------------------------

4.13 ADVANCE MENU_ BACKUP ------------------------------------------------------------------------------------------------

4.14 ADVANCE MENU_ HDD INFO ----------------------------------------------------------------------------------------------

4.15 ADVANCE MENU_ EVENT LOG -------------------------------------------------------------------------------------------

ADDITIONAL OPERATION

5.1 SEARCH -----------------------------------------------------------------------------------------------------------------------------

5.2 2X DIGITAL ZOOM ---------------------------------------------------------------------------------------------------------------

5.3 KEY LOCK --------------------------------------------------------------------------------------------------------------------------

5.4 SWITCH THE N/P SYSTEM ----------------------------------------------------------------------------------------------------

5.5 USB UPGRADE--------------------------------------------------------------------------------------------------------------------

5.6 LICENSED SOFTWARE AP---------------------------------------------------------------------------------------------------AP BASIC OPERATION --------------------------------------------------------------------------------------------------AP ADVANCED SETTING -------------------------------------------------------------------------------------------------

Network -----------------------------------------------------------------------------------------------------------DDNS ---------------------------------------------------------------------------------------------------------------MAIL ----------------------------------------------------------------------------------------------------------------FTP -----------------------------------------------------------------------------------------------------------------DVR-CAMERA SETTING -------------------------------------------------------------------------------------DEVICE ------------------------------------------------------------------------------------------------------------DETECTION ------------------------------------------------------------------------------------------------------NETWORK BACKUP & PLAYBACK ----------------------------------------------------------------------ALARM ------------------------------------------------------------------------------------------------------------ALARM LIST -----------------------------------------------------------------------------------------------------GENERAL --------------------------------------------------------------------------------------------------------ACCOUNT --------------------------------------------------------------------------------------------------------ONLINE USER INFO -------------------------------------------------------------------------------------------FILE PATH ---------------------------------------------------------------------------------------------------------

5.7 CONNECT TO AP VIA IE BROWSER ---------------------------------------------------------------------------------------

5.8 GPRS ---------------------------------------------------------------------------------------------------------------------------------

5.9 OPTIONAL PHERIPHERALS --------------------------------------------------------------------------------------------------

TROUBLE SHOOTING

6.1 FAQ -----------------------------------------------------------------------------------------------------------------------------------

APPENDIX #1

INSTALL THE HDD ---------------------------------------------------------------------- -------------------------------------

APPENDIX #2

PIN CONFIGURATION ------------------------------------------------------------------------------------- ------------------

APPENDIX #

APPENDIX #33

RS232 PROTOCOL ----------------------------------------------------------------- -----------------------------------------

APPENDIX #

APPENDIX #33

RECORDING TIME TABLE ----------------------------------------------- --------------------------------------------------

APPENDIX #

APPENDIX #44

COMPATIBLE USB BRAND --------------------------------------------------------------------------- ---------------------

APPENDIX #

APPENDIX #55

COMPATIBLE HDD BRAND ------------------------------------------------------------------------------------------------

1 1 2 4 8

11 12

14 15 16 17 18 18 19 21 22 23 24 25 26 28 28

29 30 30 30 31 31 32 37 37 38 39 39 40 40 41 42 43 43 44 44 45 45 46 47 47

49 51 53 54 55 56

PARTS AND FEATURES

1.1 FEATURES

1.2 PACKAGE CONTENTS

NOTE: Please check the package contents to make sure that you receive all accessories shown above.

MPEG4 DVR Technology

Compression format provides crystal clear image with real time performance

Multiplex

Allows live display, record, playback, backup, and network all at the same time

Long

Long--

Recording Hours:

500GB can record more than 14 days. (16CH, real-time recording) Connect to Independent Disk Array (optional) to have more storage capacity

Backup Function:

Backup files with USB interface, DVD-RW or CD-RW and network remote recording & backup

Remote Surveillance:

GPRS allows viewing and controlling of the system & also support remote surveillance with licensed software AP and IE browser Web surveillance supports 5 users simultaneously

Intelligent Motion Trigger Recording:

With advanced motion detection function, scheduled motion detection recording (4 different adjustable factors for motion detection sensitivity) and convenient search function, customized security environment is achieved

Alarm trigger recording will send alert with images to designated e-mail and FTP address Supports pre-alarm recording (8MB)

Covert Recording:

A mask replaces the live image with a blank screen & the monitor shows nothing but recording is still on

A/V Support:

Supports 4 audio-in, 2 audio-out to record sounds Supports VGA output to monitor (optional)

General:

Support multi-language OSD System auto recovery after power reconnected IR remote control of the system and PTZ through RS-485 Support daylight saving function Support manual / timer / motion / alarm / remote recording functions Watermark function ensures authentication of recorded images Support TCP/IP, PPPoE, DHCP and DDNS network connection

MODEL 16CH 8CH 4CH 16CH / 8CH / 4CH

DVD-RW / CD-RW

Digital Video Recorder

ˇˇ ˇ ˇ

Adapter

ˇˇ ˇ ˇ

Licensed Software AP

ˇˇ ˇ ˇ

IR Transmitter and IR Receiver

ˇˇ

Optional

Power and Data Bus

ˇˇ ˇ ˇ

DSUB PIN Connector

ˇˇ ˇ ˇ

Screws

ˇˇ ˇ ˇ

1.3 SPECIFICATION

MODEL

16CH / 16CH (D) 8CH / 8CH (D) 4CH / 4CH (D)

Video System NTSC / PAL (switch able)

8 Channels 4 Channels

720 × 480 pixels with 60 IPS 〈NTSC〉 720 × 576 pixels with 50 IPS 〈PAL

〉

720 × 480 pixels with 30 IPS〈NTSC〉 720 × 576 pixels with 25 IPS 〈PAL

〉

Maximum Recording Rate (CIF)

352 × 240 pixels with 480 IPS 〈NTSC〉 352 × 288 pixels with 400 IPS 〈PAL〉

352 × 240 pixels with 240 IPS 〈NTSC〉 352 × 288 pixels with 200 IPS 〈PAL〉

352 × 240 pixels with 120 IPS〈NTSC〉 352 × 288 pixels with 100 IPS 〈PAL〉

60, 30, 15, 7 IPS <NTSC> 50, 25, 12, 6 IPS <PAL>

30, 15, 7, 3 IPS <NTSC> 25, 12, 6, 3 IPS <PAL>

Adjustable Recording Speed (CIF) 480, 240, 120, 60 IPS <NTSC>

400, 200, 100, 50 IPS <PAL>

240, 120, 60, 30 IPS <NTSC> 200, 100, 50, 25 IPS <PAL>

120, 60, 30, 15 IPS <NTSC> 100, 50, 25, 12 IPS <PAL>

8CH: support HDD * 2

8CH (D): support HDD *1

4CH: support HDD * 1

4CH (D): support HDD *1

240 IPS for NTSC

200 IPS for PAL

120 IPS for NTSC

100 IPS for PAL

USB Interface front panel * 1, back panel * 1 front panel * 1

Ethernet 10/100 Base-T. Support remote control and live view via Ethernet Mobile Surveillance Support GPRS to access the system via mobile phone (require J2ME, MIDP2.0 protocol)

Remote Alarm Notification E-mail images, and images uploading to FTP site’s specific account Network Pro tocol TCP/IP, PPPoE, DHCP and DDNS IR transmitter Remote control DVR and PTZ via IR transmitter (RS-485) (4CH: Optional) PTZ control Support PELCO-D protocol Dwell Time (Sequential Channel Switch) Programmable with adjustable dwell time (2, 4, 8, 16 sec.)

8 inputs, 1 output 4 inputs, 1 output

Video Loss Detection Yes

Web Interface Support licensed software AP, and IE browser

Web Transmitting Compression Format Motion JPEG

Alarm I/O 16 inputs, 1 output Picture Zoom Support 2X digital zoom function Key Lock Yes

Video Compression Format Video Input

(Composite video signal 1 Vp-p 75Ω BNC)

Video Loop Out

(Composite video signal 1 Vp-p 75Ω BNC)

Video Output

Maximum Recording Rate (Frame)

Adjustable Recording Speed (Frame)

Image Quality Setting Hard Disk Storage

(IDE type, ATA66) (over 400GB) HDD Quick Cleaning Recording Mode Watermark Refresh Rate

Multiplex Operation Audio I/O Motion Detection Area Motion Detect Sensitivity Pre-alarm Recording Backup Device

MPEG 4

16 Channels

Main Monitor Output:

Composite video signal 1 Vp-p 75Ω BNC

Call Monitor Output:

Composite video signal 1 Vp-p 75Ω BNC

720 × 480 pixels with 120 IPS 〈NTSC〉 720 × 576 pixels with 100 IPS 〈PAL〉

120, 60, 30, 15 IPS <NTSC> 100, 50, 25, 12 IPS <PAL>

Best, High, Normal, and Basic

16CH: support HDD * 2

16CH (D): support HDD *1

Manual／Timer／Motion／Alarm

480 IPS for NTSC

400 IPS for PAL

4 audio inputs, 2 audio outputs (Mono)

16 × 12 grids per camera for all channels

4 adjustable variables with precise calculation for motion detection

Yes (8 MB)

USB1.1 / 2.0 backup and network remote backup

Quick clean up the “index system” of the recorded files. 250GB under 2 seconds

Yes

live display, record, playback, backup, and network

 Any changes made to the actual product are subjects to no further notification.

MODEL

16CH / 16CH (D) 8CH / 8CH (D) 4CH / 4CH (D)

Specification Continued …

Power Consump tion ＜64 W 4CH: ＜42 W ; 4CH (D): ＜64 W

Dimensions (mm)

432mm (W) × 90mm (H) × 326mm (D)

Independent Disk Array ; VGA

Connector ; IR Remote Control

Camera Title Video Adjustable Date Display Fo rmat Daylight Saving Power Source

Operating Temperature

System Recovery

Optional Peripherals

Support up to 6 letters

Hue／Color／Contrast／ Brightness

YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off

Yes

DC 19V

10℃ ~ 40℃ (50℉~104℉)

System auto recovery after power reconnected

Independent Disk Array ; VGA Connector

1.4 FRONT PANEL

1) POWER: Press “POWER” button to turn on/ turn off the DVR. (Under recording mode, please stop record before turn off the DVR)

2) MENU: Press “MENU” button to enter main menu.

3) ENTER / RECORD: Press “ENTER” button to confirm. Press “RECORD” to activate the manual recording.

4) “＋ ““－ ”: Press “＋ “or “－ ” button to change the setting in the menu / to select the channel. Press “＋“and “－－” buttons to open / close the DVD / CD WRITER.

5) USB: Support firmware update and files backup.

6) LED LIGHT: POWER: Power on STANDBY: Standby HDD: HDD is reading or recording HDD Full: HDD is full. ALARM: Once the alarm is triggered TIMER: When timer recording is turned on. REC: Under recording status PLAY: Under playing status

7) MODE : Press “MODE ” button to switch channel display mode.

16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D)

8) “ ” : Press “ ” button to pause the play back files.

9) “ ” : Press “ ” button to stop the play back files.

10) “ “ : Under playback mode, press “ ” button to fast rewind.

11) “ “ : Under playback mode, press “ ” to fast forward.

12) “ZOOM” : Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

13) “PLAY” : Press “PLAY” button to playback recorded files.

14) “▲▼◄►“: Press “▲▼◄►” to move the cursor up / down / left / right.

15) “SHIFT”+ “SEQ”: Press “SHIFT” + “SEQ”to activate the call monitor function and press “SEQ” to escape the call monitor mode.

16) “SHIFT” + “AUDIO“ : Press “SHIFT” + “AUDIO“ to select live or playback sounds of the 4 audio channels.

17) “SHIFT” + “SLOW“ : Under playback mode, press “SHIFT” + “SLOW“ to show slow playback.

18) “SHIFT” + “CH－ “or “CH＋”: Press “SHIFT” + “CH－ “ or “CH＋” change the setting in the menu / to select the channel.

19) “SHIFT” + “SET” : Press “SHIFT” + “SET” to change channel display position.

Press “▲▼◄►” to select the channel which You would like to change, Press “＋”or “－” select the channel which You would like to show. Press “ENTER” button to confirm.

20) “SHIFT” + “SEARCH” : Press “SHIFT” + “SEARCH” buttons to enter the search mode.

21) “ ” + “ ” : Press “ ” + “ ” buttons at the same time to enter / exit the PTZ control mode.

1.4 FRONT PANEL

Continued

Continued……

1) “HDD Cartridge Lock”: Lock / Unlock the cartridge of the HDD.

2) “USB”: Support firmware update and files backup.

3) “LED LIGHT”: HDD: HDD is reading or recording

HDD Full: HDD is full. ALARM: Once the alarm is triggered TIMER: When timer recording is turned on PLAY: Under playing status REC: Under recording status

4) “MENU”: Press “MENU” button to enter main menu.

5) “ENTER”/ “SET”: Press “ENTER” button to confirm.

Press “SET” to change channel display position. Press “▲▼◄►“ to select the channel which you like to change, Press “＋”or “－” select the channel which You would like to show.

Press “ENTER” button to confirm.

6) “SEARCH ”: Press “SEARCH” button to enter the search mode.

7) “SLOW ”: Under playback mode, press “SLOW“ button to show slow playback.

4CH

7) “ZOOM ”: Press “ZOOM” button to enlarge the picture of selected channel (2X digital zoom).

8) “ ” / “ － ”: Press “ “ button to show the 4 channel display mode. Press “ － ” button to change the setting in the menu.

9) “SEQ”/ “＋ ”:

Press “SEQ” button to activate the call monitor function and press “SEQ” button again to escape the call monitor mode. Press “＋ ” button to change the setting in the menu.

10) “POWER”: Press this button to turn on / turn off the DVR. (Under recording mode, please stop record before turn off the DVR).

11) “CH1 ”“CH2 ”“CH3 ”“CH4 ”: Press “1 ”“2 ”“3 ”“4 ” buttons to select the channel.

12) “REC”:

Press “REC” button to activate the manual recording.

13) “PLAY”:

Press “PLAY” button to playback the recorded files.

14) “UP / PAUSE , DOWN / STOP, LEFT / FAST REWIND, RIGHT / FAST FORWARD“: Press “▲▼◄►“ to move the cursor up / down / left / right.

Under playback mode, press “ “ button to pause playback. Under playback mode, press “ “ button to stop playback. Under playback mode, press “ “ button to fast rewind. Under playback mode, press “ “ button to fast forward.

15) “ ” : Press these two buttons to select live or playback sounds of the 4 audio channels.

16) “ ” : Press these two buttons at the same time to enter / exit the PTZ control mode.

1.5 REAR PANEL

DISK ARRAY

INPUT

LOOP

1 2 10 11 12

LAN

ACT.

LINK

13 14 155

EXTERNAL I/O

6 7 8 9

HI-IMPEDANCE

75?

USB

D / V

HI-IMPEDANCE

RS 485

75? 8

CALL

DC19V

MONITOR

1 3

6 7

16CH / 16CH (D)

DC 19V

INPUT

DISKARRAY

LOOP

RS 485

INPUT

INPUT INPUT

EXTERNA L I/O

USB

INPUT

LOOP

LOOP LOOP LO OP

INPUT

D/V

LAN

INPUT

ACT.

LINK

INPUT

CALL

LOOP LOOP LOOP

MONITOR

6 7

12 13

8CH / 8CH (D)

INPUT

LOOP

DC 19V

LOOP LOOP

INPUT

ACT.

LAN

LINK

CALLMONITOR

OUT

INPUT

D/V

HI-IMPEDANCE

75?

LOOP

EXTERNAL I/O

DISK ARRAY

2 1

7 8

179

12 13

4CH / 4CH (D) ~ But size are different

1) DISK ARRAY PORT: Connect to disk array for extend HDD capacity.

2) IR: Connect to IR receiver.

3) RS485: Connect to external device (such as PTZ camera) with RS485-A and RS485-B.

4) EXTERNAL I/O PORT: Connect to external device. Control external device or get controlled remotely by external device (alarm input, external alarm, PTZ camera).

5) USB PORT: Support firmware update and files backup.

6) D/V PORT (Digital Video Port): Connect to VGA connector card.

7) LAN: Connect to Internet by LAN cable.

8) LINK / ACT LED light: When the Internet is activated, the LED light will turn on.

9) CALL MONITOR: Connect to CALL monitor. Show the channel switch display. When the alarm is triggered, the call monitor will show the image of the triggered channel for a period of time.

10) POWER: Connect to provided adapter.

11) FAN: For ventilation.

12) VIDEO INPUT (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) : Connect to video source, such as camera.

13) LOOP (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) : Video output.

14) 75Ω / HI: When using Loop function, please switch to HI. When you don’t use Loop function, please switch to 75Ω.

15) MONITOR: Connect to Main monitor.

16) AUDIO IN (1-4): Connect to audio source, such as camera which equipped with audio function. When users start the recording function, the audio input will be recorded .

17) AUDIO OUT : Connect to monitor or speaker. With 2 mono audio outputs from the same source.

2.1 GETTING STARTED

GETTING STARTED

NOTE:

Please refer to Appendix #1 for HDD installation instructions.

NOTE:

NOTE: Please refer to “Section 1.5 Rear Panel” for connection.

NOTE:

NOTE: Please refer to Appendix#2 for pin configurations of the external I/O port .

Connecting all the devices to construct a surveillance.

1) Install HDD: The HDD must be installed before the DVR is turned on.

2) Connect cameras.

3) Connect monitors.

4) Connect the external devices.

5) Connect the AC power cord to power adapter and plug into an electrical outlet. The standby LED would be on as red. Press the “POWER” button. The power LED will be on as red. It takes approximately 10 to 15 seconds to boot the system.

Channel Title

Available Capacity of

Internal HDDs

System Time

Under HDD Overwrite

Mode

Take 16CH as an example

BASIC OPERATION

3.1 RECORDING

The DVR offers three recording modes, manual record, event recording, and timer record. If power is off accidentally, recorded video files will still be stored in the HDDs.

DVR will return to original recording status after power is on again.

1) MANUAL RECORDING (continuous recording) : Recording is initiated by manually pressing the “REC” button. Indicated by the sign “●”

2) EVENT RECORDING (triggered by motion and external alarm) : When this functions is activated, the recording is triggered by motion or external alarm. Indicated by the sign “ ” and “ ” .

3) TIMER RECORDING (scheduled time) : Recording is scheduled by Timer. Indicated by the sign “TIMER RECORD”.

Under

Recording

NOTE : When the HDDs are full under O/W recording mode, previous recorded files may be overwritten without further warning notices.

Take 16CH as an example

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press ” ” once to get 4X speed forward and press twice to get 8X speed,… and the maximum speed can reach 32X. ＊ Press ” ” once to get 4X speed rewind and press twice to get 8X speed, … and the maximum speed can reach 32X. ＊ The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ ” button to pause the current image displayed on the screen. In the Pause mode,

＊ Press ” ” once to get forward by frame change. ＊ Press ” ” once to get rewind by frame change.

3) STOP:

Press “ ” button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to select display mode.

＊ Full Screen Switch:

Press “＋”or “－” button to show the full screen channels.

＊ Channel display switch:

Press “ ” + “ ”button. Press “▲”“▼”“◄”“►” to select the channel which You would like to change. Press “＋”or “－” select the channel which You would like show.

Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “ ” + “ ” button to get 1/4X speed playback and press twice to get 1/8X speed.

6) AUDIO:

Press “ ” + “ “to select live or playback sounds of the 4 audio channels.

＊ AUDIO 1 (L) ; AUDIO 1 (P) ＊ AUDIO 2 (L) ; AUDIO 2 (P) ＊ AUDIO 3 (L) ; AUDIO 3 (P) ＊ AUDIO 4 (L) ; AUDIO 4 (P)

3.2 PLAYBACK

Note:

For the playback of the DVD or CD backup file, please refer to “Section 5.14 ADVANCE

MENU_BACKUP” for detailed instruction

16CH / 8CH 16CH (D) / 8CH (D) / 4CH (D)

Press “ PLAY ” button, the DVR will display the last recording video.

1) FAST FORWARD (F.F. ) & FAST REWIND (REW):

You can increase speed for fast forward and rewind on the DVR. In the playback mode, ＊ Press “ “ once to get 4X speed forward and press twice to get 8X speed,

… and the maximum speed can reach 32X.

＊ Press “ “ once to get 4X speed rewind and press twice to get 8X speed,

… and the maximum speed can reach 32X.

＊ The type of recording image size (Frame or CIF )will also shown on the screen.

2) PAUSE / IMAGE JOG:

Press “ “ button to pause the current image displayed on the screen. In the Pause mode,

＊ Press “ “ once to get forward by frame change. ＊ Press “ “ once to get rewind by frame change.

3) STOP:

Press “ “ button under all circumstance, it will return DVR to live monitoring mode.

4) CHANNEL SHIFT:

＊ Display mode:

Press MODE “ ” button to 4 channels display.

＊ Full Screen Switch:

Press “＋”or “－” button to show the full screen channels.

＊ Channel display switch:

Press “SET” to change channel display position. Press “▲▼◄►“ to select the channel which you like to change,

Press “＋”or “－” select the channel which You would like show. Press “ENTER” button to confirm.

5) SLOW PLAYBACK:

Press “SLOW” button to get 1/4X speed playback and press twice to get 1/8X.

6) AUDIO:

Press “ ” to select live or playback sounds of the 4 audio channels.

＊ AUDIO 1 (L) ; AUDIO 1 (P) ＊ AUDIO 2 (L) ; AUDIO 2 (P) ＊ AUDIO 3 (L) ; AUDIO 3 (P) ＊ AUDIO 4 (L) ; AUDIO 4 (P)

4CH

DETAILED MENU CONFIGURATION

4.1 MENU TREE

DATE:

YEAR MONTH DAY

FORMAT: Y

FORMAT: Y--MM--D D ……

TIME:

HOUR MIN SEC

RECORD

TIMER

DATE

ADVANCE

TITLE

BRIG

CONT

SATU

HUE

COV

REC

CAMERA

DISPLAY

REMOTE

NETWORK

MANUAL RECORD

ENABLE

EVENT RECORD

ENABLE

TIMER RECORD

ENABLE

OVERWRITE

RECORD IMG SIZE

RECORD QUALITY

MANUAL RECORD

IPS

EVENT RECORD

IPS

TIMER RECORD

IPS

TOTAL IPS SHARE

DATE

START

HH : MM

END

HH : MM

ALERT

BACKUP

EVENT LOG

HDD INFO

TITLE DISPLAY

DATE DISPLAY

HDD INFO

LOSS SCREEN

PLAYBACK

INFO

DWELL

DURATION

(SEC)

DEDE-

INTERLACE

EXT. ALERT

INT. BUZZER

KEY BUZZER

VLOSS BUZZER

MOTION BUZZER

ALARM BUZZER

ALARM DURATION

(SEC)

HDD BUZZER

HDD NEARLY FULL

(GB)

SYSTEM

SERIAL TYPE

BAUD RATE

HOST ID

PASSWORD

RESET DEFAULT

CLEAR HDD

UPGRADE

VERSION

VIDEO FORMAT

LANGUAGE

AUTO KEYLOCK

WATERMARK

PRE

PRE--

ALARM

DAYLIGHT SAVING

TITLE

DET

AREA

ALARM

DETECTION

TITLE

DEVICE

PROTOCOL

RATE

MONITOR

OUT

DETECTION

TIMER

4.2 MAIN MENU OPTIONS___RECORD

Move the cursor to the “RECORD”, and press ”ENTER”, then the screen will show the following options.

1) MANUAL RECORD ENABLE: Start / Stop the manual recording function.

2) EVENT RECORD ENABLE: Start / Stop the event recording function. When this functions is activated, the recording will triggered by motion or external alarm

3) TIMER RECORD ENABLE

Start / Stop the timer recording function.

4) OVERWRITE: Select to overwrite previous recording video in HDD. When the HDD is full under O/W recording mode, previous recorded files will be overwritten without further warning notices.

5) RECORD IMG SIZE: There are two recording options: FRAME & CIF. When change record image size, user need to stop recording first.

6) RECORD QUALITY: There are four quality settings: BEST, HIGH, NORMAL & BASIC

In the following (7) ~ (9) sections is for 16 channels.

For 8 channels, divided the IPS by 2. For 4 channels, divided the IPS by 4.

7) MANUAL RECORD IPS: Recording is activated by pressing the “REC” button. Select the images per second of MANUAL RECORD, The options are as the followings:

NTSC

NTSC: FRAME: 120, 60, 30, 15

PAL

PAL: FRAME: 100, 50, 25, 12

CIF: 480, 240, 120, 60 CIF: 400, 200, 100, 50

(MENU)

►

RECORD

TIMER DATE ADVANCE

Press “MENU” button to enter the main menu list. The default admin password is 0000. Enter the default password and press “ENTER”. (Users could alter the password later, please refer to “Section 5.12 ADVANCE MENU_SYSTEM”

)

Use the following buttons for menu setting: “▲▼◄► “ to move the cursor. “＋ , －” to choose the numbers / selections. “ ENTER “ to go to the submenu / to confirm the selection “ MENU “ to go to the menu OSD

/ to confirm the change / to exit the menu OSD

RECORD

MANUAL RECORD ENABLE EVENT RECORD ENABLE TIMER RECORD ENABLE OVERWRITE RECORD IMG SIZE RECORD QUALITY MANUAL RECORD IPS EVENT RECORD IPS TIMER RECORD IPS TOTAL IPS SHARE

+ 42 hidden pages

Swann 16CH, 8CH (D), 16CH (D), 4CH, 4CH (D) User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual