Swann 1060 User Manual
Help Desk / Support Details
English
All Countries E-mail:
Telephone Helpdesk
UNITED STATES toll free
877-274-3695
(Sun-Thurs, 2pm-10.30pm PST)
800-627-2799
(Mon-Fri, 9am-1pm PST)
USA Exchange & Returns
562-777-2551
(Mon-Fri, 9am-4pm PST)
AUSTRALIA toll free
(Mon-Fri, 9am-5.30pm Aus EST)
+61 3 8412 4610
(Mon-Fri, 9am-5.30pm Aus EST)
See http://www.worldtimeserver.com for information on different time
zones and the time in Melbourne Australia compared to your local time.
WARRANTY INFORMATION
Swann Communications warrants this product against defects in workmanship and
material for a period of one ( ) year from it’s original purchase date. You must present
your receipt as proof of date of purchase for warranty validation. Any unit which proves
defective during the stated period will be repaired without charge for parts or labour, or
replaced at the sole discretion of Swann. The repair or replacement will be warranted for
either ninety days or the remainder of the original one year warranty period, whichever is
longer. The end user is responsible for all freight charges incurred to send the to
Swann’s repair centres.
shipping from and to any country other than the country of origin. The warranty does not
cover any incidental, accidental or consequential damages arising from the use of, or the
inability to use this . Any costs associated with the fitting or removal of this
product by a tradesman or other person, or any other costs associated with its use are
the responsibility of the end user. This warranty applies to the original purchaser of the
product
only, and is not transferrable to any third party.
product
1
The end user is responsible for all shipping costs incurred when
tech@swann.com.au
1300 13 8324
International
product
1060 Camera Housing
All Weather Camera Protection
with inbuilt heater / blower
If this device does not work correctly when you first
use it, do not take it back to the store.
Contact the Swann Helpdesk using our fast e-mail service
tech@swann.com.au
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
or call us on one of the Toll-Free
Unauthorised end user or third party modifications to any component or evidence of
misuse or abuse of the device will render all warranties void.
www.swann.com.au
Installation Guide
INDEX
Introduction
This package comes with...
Opening the 1060 Housing
Installing a Camera
Connecting your Camera
Connecting the Heater / Blower Power
Mounting the 1060 Housing
Technical Specifications
Help Desk / Support Details
Warranty Information
INTRODUCTION
2
2
2
2
3
3
4
4
5
5
6
6
7
7
7
7
Back Cover
Back
Cover
Back Cover
Back
Cover
Mounting the 1060 Housing
Using the built in adjustable
mounting points you can mount the
1060 Housing on a stand, pole or
wall bracket. For alternative
mounting options, the Universal Tilt
and Swivel stand is available for
separate purchase. Product code
SW-A-CBI. Check with your local
retailer for more details.
The Swann Camera Housing is designed to keep your CCTV camera
1060
safely enclosed to minimise the risk of damage by vandals or storms, and also
from being affected by inclement weather. Its flexible design allows it to
accommodate most CCTV cameras currently available.
The 1060 Housing also comes equipped with a low voltage heater bar and
cooling fan to assist with keeping your images clear during periods of poor
weather.
This package comes with...
• 1 x CCTV Camera Housing
• 2 x Cable Seal Plug with Rubber Grommet and Locking Nut
• 1 x Camera Mounting Screw
• 2 x Camera Base Plate Mounting Screws
• 1 x Imitation Camera Fascia
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Technical Specifications
Specification of Housing
Dimensions:
Weight:
(LxWxH): ~400mm x mm x mm
15¾”x ”x ” 140 112
3¼lb ~ 1.5Kg (without camera)
Camera Opening Diameter:
Material:
Case ~ Powder Coated Aluminium
Camera Opening ~ ” (3mm) Glass
Camera Mounting plate ~ Impact Resistant Plastic
5½ 4 /
¾72
2”~ mm
1
/
8
1
3
Specification of Heater / Blower
Power Requirement:
Temperature Activation:
following temperatures. The fan and heater do not both run at the same time.
Volt DC ~ amp (500mA)
12 0.5
The fan or heater will activate automatically at the
Hot Weather:
Cold Weather:
2
Fan on at 98.6°F (37°C)
Heater on at 59°F ( °C)
15
7
Loading...