Swan SDW7040ON User Manual [nl]

Quick operation guideQuick operation guide

For detailed operating method read the corresponding content on the instruction manual.

Switch on the appliance

Fill the detergent dispenser

Press the Power switch button to switch on the appliance, Open the door.

Compartment A:Compartment A:
With each wash cycle.
Compartment B:B:
For programmes with pre-wash only.

(Follow the user instructions!)

CC

BB

AA

Check the rinse aid level

Check the regeneration

salt level

Load the baskets

Select a programme

Running the dishwasher

Changing the programme

Add forgotten dishes in the
dishwasher.

Mechanical indicator C. Mechanical indicator C.
Electric indicator on control panel (if provided).

(On models with water softener system only.)
Electric indicator on control panel (if provided).

If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.

Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.

Open the door and press the power button, then press program button to select your desired program.
( See the section entitled Operationg instruction )

Close the door, t urn on the water tap. The machine will start working after about 10 seconds.

1. A running cycle can only be modified if it has been running for a short time. If the detergent has
already been released and the water has already been drained out, the detergent dispenser must
be refilled.

2. Open the door carefully. When sprayers stop running, pless press the program button more than
3 seconds to cancel the running programme.

3. Select a new programme.

4. Close the door to restart the dishwasher.

1.Open the door to stop the machine.

2.Add the forgotten dishes, when the sprayers stop running completely.

3.Close the door, and the dishwasher will start running again after 10
seconds.

WARNING!

Open the door carefully.
Hot steam may escape
when the door is opened!

If the appliance is switched
off during a wash cycle.

Switch off the appliance

Turn off the water tap,
unload the baskets

If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).

When the working cycle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance by pressing the Power button.

Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better.Unload the appliance, starting from the lower basket.

Read this Manual

Dear Customer,

This appliance is intended to be used in household
and similar applications such as:

-staff kitchen areas in shops, offices and other
working environments;

-farm houses;

-by clients in hotels, motels and other residential
type environments;

-bed and breakfast type environments.

Please carefully read this manual before using the
dishwasher, it will help you to use and maintain the
dishwasher properly.
Keep it as a refer in the later days.

Pass it on to any subsequent owner of the appliance.

This manual contains sections on safety Instructions,
Operating Instructions, Installation Instructions and
Troubleshooting Tips, etc.

Before Calling for Service

To review the section on troubleshooting Tips
will help you to solve some common problems
by yourself .

If you can not solve the problems by yourself ,
please ask for the help of

professional technicians.

NOTE:

The manufacturer, following a policy of constant
development and updating of the product, may
make modifications without giving prior notice.

This product is guaranteed for one year from the date of original
purchase. If any defect arises due to faulty materials of

workmanship the faulty product will be repaired, refunded
or replaced at our discretion.

The following conditions apply: 
The product must have been purchased from new. Proof of
purchase will be required

The product must be installed and used in accordance with the
instructions contained in this instruction guide. It must be used
only for household and similar purposes such as: 

· staff kitchen areas in shops, offices and other working

environments;

· farm houses and by clients in hotels, motels and other
residential type environments;

· bed and breakfast type environments;

· catering and similar non-retail applications.
The appliance has not been altered, serviced, dismantled or
otherwise interfered with by any person not authorised by

Swan.
Any repair work must be undertaken by us or our appointed

agent.
Any parts removed during repair work or any appliance that
is replaced becomes our property. It does not cover wear

and tear, damage, misuse or consumable parts. Swan
Products Ltd has no liability for incidental or consequential
loss or damage. Food value is NOT covered by the warranty.
This guarantee is valid in the UK and Eire Only.

1) Safety Information..........................................11) Safety Information..........................................1

2) Disposal.........................................................22) Disposal.........................................................2

3) Operating Instructions.....................................33) Operating Instructions.....................................3

Control Panel...................................................3

Dishwasher Features.................................... ...3

4) Prior using for the first time...............................44) Prior using for the first time...............................4

A Water Softener...........................................4

B Loading the Salt into the Softener.................5

C Fill the Rinse Aid Dispenser.........................5

D Function of Detergent .................................6

5) Loading the Dishwasher Basket........................95) Loading the Dishwasher Basket........................9

Attention before or after loading the Dishwasher

Baskets..........................................................9

The Method Loading Normal Dishware.............10

6) Starting a washing programme........................116) Starting a washing programme........................11

Wash Cycle Table...........................................11

Turning on the Appliance................................12

Change the Programme..................................12

At the End of the Wash Cycle...........................12

7) Maintenance and cleaning..............................137) Maintenance and cleaning..............................13

Filtering System.............................................13

Caring for the Dishwasher...............................14

8) Installation instruction....................................158) Installation instruction...................... ............15..

Positioning the Appliance...............................15

About Power Connection................................15

Water Connection..........................................16

Start of dishwasher........................................17

9) Troubleshooting Tips......................................189) Troubleshooting Tips................................ ....18..

Before calling for service.................................18

Error codes...................................................19

Technical information.....................................20

Loading the baskets according to En50242 Loading the baskets according to En50242

1.IMPORTANT SAFETY INFORMATION

1.IMPORTANT SAFETY INFORMATION

READ ALL OF THE INSTRUCTIONS BEFORE USING

READ ALL OF THE INSTRUCTIONS BEFORE USING

WARNING! WARNING!

GROUNDING INSTRUCTIONS

BS Plug Wiring
The wires in the mains lead are coloured in accordance with the following code:
BLUE NEUTRAL BROWN LIVE GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings
identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or
coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L or coloured red. The wire which is coloured GREEN/YELLOW must be connected to the
terminal which is marked with the letter E or (earth symbol) and is coloured GREEN or GREEN/YELLOW.
WARNING: THIS APPLIANCE MUST BE EARTHED 

WARNING! PROPER USE

Do not abuse, sit on, or stand on the door or dish
rack of the dishwasher.

Do not touch the heating element during or
immediately after use.
(This instruction is only applicable to machines
with a visual heating element.)
Do not operate your dishwasher unless all
enclosure panels are properly in place. Open
the door very carefully if the dishwasher is
operating, there is a risk of water squirting out.
Do not place any heavy objects on or stand on the
door when it is open. The appliance could tip
forward.
When loading items to be washed:

1) Locate sharp items so that they are not likely
to damage the door seal;

2) Warning: Knives and other utensils with
sharp points must be loaded in the basket
with their points down or placed in a
horizontal position.

When using your dishwasher, you should
prevent plastic items from coming into contact
with the heating element.(This instruction is only
applicable to machines with a visual heating
element.)
Check that the detergent comparment is empty
after completion of the wash cycle.
Do not wash plastic items unless they are marked
dishwasher safe or the equivalent. For plastic it ems
nots

o m

recommendations.
Use only detergent and rinse additives
designed for an automatic dishwasher.
Never use soap, laundry detergent, or hand
washing detergent in your dishwasher. Keep
these products out of the reach of children.

When using your dishwasher, follow the precautions listed below:







Keep children away from detergent and rinse aid, keep
children away from the open door of the dishwasher,
there could still be some detergent left inside.
This appliance is not intended for use by persons
(including children )with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge ,unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.

Dishwasher detergents are strongly alkaline, they
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children away
from the dishwasher when the door is open.

The door should not be left open,
since this could increase the risk of tripping.

If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a
hazard.

Remove the door to the washing compartment when
removing an old dishwasher from service or discarding it.

Please dispose of packing materials properly.
Use the dishwasher only for its intended function.

During installation, the power supply must not
be excessively or dangerously bent or flattened.

Do not tamper with controls.
The appliance is to be connected to the water

mains using new hose sets and that old hose-sets
should not be reused.

The maximum number of place settings to be
washed is 12.
The maximum permissible inlet water pressure is
1MPa.

The minimum permissible inlet water pressure is

0.04MPa.

arked,c

heck th em

Children should be supervised to ensure that they do
not play with the appliance.

anufacturer's





READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY
KEEP THESE INSTRUCTIONS

11

2.Disposal2.Disposal

Disposal of Unit 
Disposal instructions for Swan items in accordance with the WEEE
directive. Appliances bearing the symbol shown here may not be
disposed of in domestic rubbish. You are required to dispose of old
electrical and electronic appliances like this separately. Please visit
www. recyclemore.co.uk, or www.recyclenow.co.uk for access to
information about the recycling of electrical items. The WEEE directive,
introduced in August 2006, states that all electrical items must be recycled,
rather than taken to landfill. Please arrange to take this appliance to your
local Civic Amenity site for recycling, once it has reached the end of its life. 

WARNING! WARNING!

Packaging material could be dangerous for children!
For disposing of package and the appliance please go to a recycling centre. Therefore cut
off the power supply cable and make the door closing device unusable.
Cardboard packaging is manufactured from recycled paper and should be disposed in the
waste paper collection for recycling.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local
city office and your household waste disposal service.

DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such
waste separately for special treatment is necessary.

22

3.Operation Instruction3.Operation Instruction

IMPORTANTIMPORTANT

To get the best performance from your dishwasher, read all operating instructions
before using it for the first time.

Control PanelControl Panel

11

1

1 Display Window
a) Labels in the first row ordinally mean intensive, normal, eco, glass, 1 hour and rapid;
b) Labels in the second row ordinally mean rinse-aid, salt,3 hours delay,6 hours delay,
9 hours delay and 12 hours delay.
2 Delay Start Button
3 Program Select Button
4 Power Button

313

33

22

44

Dishwasher FeaturesDishwasher Features

Front view

Back View

Upper Basket

1

Inner pipe

2

Lower Basket

3

Salt Container

4

Dispenser

5

Cup Shelf

6

Spray arms

7

Filter assembly

8

Inlet pipe connector

9

33

10

Drain pipe

4.Prior using for the first time4.Prior using for the first time

Before using your dishwasher for the first time:

A. Set the water softener

B. Add 1.5Kg dishwasher salt and then full fill the salt container with water

C. Fill the rinse aid dispenser

D. Fill in detergent

A. Water SoftenerA. Water Softener

The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have
a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of
the water used. This is intended to optimise and customise the level o f salt consumption.

Please follow the steps below for adjustment in salt consumption.

1. Switch on the appliance;

2. Press the Program button for more than 5 seconds to start the water
softener set model within 60seconds after the appliance was
switched on;

3. Press the program button to select the proper set according to
your local environment, the sets will change in the following
sequence: H1->H2->H3->H4->H5->H6;

4. Press the power button more than 5 seconds to end the set up model.

WATER HARDNESS

dH

6-11

12-17 2.1-3.0

18-22 31-40 22-28 3.1-4.0

23-34 4.1-6.0

35-55 61-98 43-69 6.1-9.8

Note:1Note:1

¡ã

¡ã

dH=1.25 Clarke=1.78 fH=0.178mmol/l

1

DH: German degree

¡ã

fH: French degree
Clark: British degree

¡ã

fH

0~90~5 0~0.94

10-20

21-30

41-60

¡ã

Clarke

0~6

7-14

15-21

29-42

¡ã

Note:2Note:2

The manufactory setting: H4 (EN 50242)

mmol/l

1.0-2.0

Selector Position

H1

H2

H3

H4

H5

H6

Salt c onsumption

(gram/cycle)

0

9

12

20

30

60

Contact your local water board for information on the hardness of your water supply.

NOTE:NOTE:

If your model does not have any water softener, you may skip this section.

WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will
form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt container specifically designed to eliminate
lime and minerals from the water.

44

B. Loading the Salt Into the SoftenerB. Loading the Salt Into the Softener

Always use the salt intended for use with dishwasher.
The salt container is located beneath the lower basket and should be filled as explained
in the following:

Attention!

Only use salt specifically designed for the use in dishwashers! Every other type of
salt not specifically designed for the use in a dishwasher, especially table salt, will
damage the water softener. In case of damages caused by the use of unsuitable
salt the manufacturer does not give any warranty nor is liable for any damages caused.

Only fill with salt just before starting one of the complete washing programs.
This will prevent any grains of salt or salty water, which may have been spilled,
remaining on the bottom of the machine for any period of time, which may cause
corrosion.

11 22

OpenOpen

A After the lower basket has been removed, unscrew and remove the cap from the salt container.
B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.

Full fill the salt container with water,It is normal for a small amount of water to come out of the

C

salt container

D After filling the container , screw the cap tightly back clockwise.
E The salt warning light will stop being after the salt container has been filled with salt.

F Immediately after filling the salt into the salt container, a washing program should be started (We suggest to use a short

program). Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.

.

11

22

NOTE:NOTE:

1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolves, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the control panel (for some Models),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.

2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive salt.

C. Fill the Rinse Aid DispenserC. Fill the Rinse Aid Dispenser

Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.

Function of Rinse Aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.

Attention!

Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.

55

When to Refill the Rinse Aid Dispenser

If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator C located next to the cap. When the rinse-aid container is full, the whole
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.

As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 ful l
1 / 2 ful l
1 / 4 full - Should refill to eliminate spotting
Empty

C (Rinse-Aid indicator) C

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

1

Pour the rinse aid into the dispenser, being careful not to overfill.

2

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

3

NOTE:NOTE:

Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming

during the next wash. Don't forget to replace the cap before you close dishwasher door.

Adjusting Rinse Aid Dispenser

The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
higher lever until your dishes are spot-free. The recommended setting is "4".
(Factory value is "4".)

NOTE:NOTE:

MAXMAX

Adjust lever

Adjust lever

(Rinse)

(Rinse)

Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or
knife blades.

D. Function of DetergentD. Function of Detergent

Detergents with its chemical ingredients are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.

Attention!

Proper Use of Detergent
Use only detergent specifically made for the use in dishwashers. Keep your detergent fresh and dry.
Don't put powdered detergent into the dispenser until you're ready to wash dishes.

66

Detergents

There are 3 sorts of detergents

1.With phosphate and with chlorine

2.With phosphate and without chlorine

3.Without phosphate and without chlorine

Normally new pulverised detergent is without phosphate. Thus the water softener function of
phosphate is not given. In this case we recommend to fill salt in the salt container even when

the hardness of water is only 6 dH. If detergents without phosphate are used in the case of hard water
often white spots appear on dishes and glasses. In this case please add more detergent to reach
better results. Detergents without chlorine do only bleach a little. Strong and coloured spots will not
be removed completely. In this case please choose a program with a higher temperature.

Concentrated Detergent

Based on their chemical composition, detergents can be split in two basic types:

conventional, alkaline detergents with caustic components
low alkaline concentrated detergents with natural enzymes

The use of normal washing programs in combination with concentrated detergents
reduces pollution and is good for your dishes; these wash programs are specifically matched
to the dirt-dissolving properties of the enzymes of the concentrated detergent. For this reason

normal wash programs in which concentra te d dete rgents are use d can achie ve t he sa me

results that can otherwise only be achieved using intensive programs.

Detergent Tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some
detergent tablets cannot dissolve and develop their full cleaning power during short
programs. Therefore please use long programs when using detergent tablets, to
ensure the complete removal of detergent residuals.

Detergent Dispenser

The dispenser must be refilled before the start of each wash cycle following the instructions
provided in the wash cycle table . Your dishwasher uses less detergent and rinse aid than
Conventional dishwasher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Always add the
detergent just before starting the dishwasher, otherwise it could get damp and will not
dissolve properly.

Amount of Detergent to Use

11 22

Push latch to openPush latch to open

Detergent powder

Detergent tablet

NOTE:NOTE:

WARNING! WARNING!

If the lid is closed: press release button. The lid will spring open.
Always add the detergent just before starting each wash cycle.

Only use branded detergent aid for dishwasher.

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.

77

Fill in Detergent

Fill the detergent dispenser with detergent.
The marking indicates the dosing levels , as
illustrated on the right:

The place of main wash cycle detergent placed.

A

The place of pre-wash cycle detergent placed.

B

Please observe the manufacturers dosing and storage
Recommendations as stated on the detergent packaging.

Close the lid and press until it locks in place.

If the dishes are heavily soiled, place an additional
detergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

AA

NOTE:NOTE:

You find information about the amount of detergent for the single programme on the last page.
Please aware, that according to the level soiling and the specific hardness of water differences are possible.
Please observe the manufacturer's recommendations on the detergent packaging.

BB

88

5.Loading the Dishwasher Baskets5.Loading the Dishwasher Baskets

RecommendationRecommendation

Consider buying utensils which are identified as dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from the detergent manufacturers.
For particular items, select a program with as low a temperature as possible.
To prevent damage, do not take glass and cutlery out of the dishwasher immediately
after the programme has ended.

For washing in the dishwasher the following cutlery/dishesFor washing in the dishwasher the following cutlery/dishes

Are not suitable

Cutlery with wooden, horn china or
mother-of-pearl handles
Plastic items that are not heat resistant
Older cutlery with glued parts that are not
temperature resistant
Bonded cutlery items or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres

Are of limited suitability

Some types of glasses can become
dull after a large number of washes

Silver and aluminum parts have a
tendency to discolour during washing

Glazed patterns may fade if machine
washed frequently

Attention before or after loading the Dishwasher BasketsAttention before or after loading the Dishwasher Baskets

(For best performance of the dishwasher, follow these loading guidelines.
Features and appearance of baskets and cutlery baskets may vary from your model.)

Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans.
It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in following way:

1.Items such as cups, glasses, pots/pans, etc. are faced downwards.

2.Curved items, or ones with recesses, should be loaded aslant so that water can run off.

3.All utensils are stacked securely and can not tip over.

4.All utensils are placed in the way that the spray arms can rotate freely during washing.

NOTE:NOTE:

Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

Load hollow items such as cups, glasses, pans etc. With the opening facing downwards so that
water cannot collect in the container or a deep base.

Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage to glasses, they must not touch.
Load large items which are most difficult to clean into the lower basket.
The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee
and tea cups
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp items of cutlery such as carving knives must be positioned
horizontally in the upper basket.
Please do not overload your dishwasher. This is important for good results and for
reasonable consumption of energy.

Removing the DishesRemoving the Dishes

To prevent water dripping from the upper basket into the lower basket, we recommend that you
empty the lower basket first and then the upper basket.

99

The Method Loading Normal DishwareThe Method Loading Normal Dishware

Loading the Upper BasketLoading the Upper Basket

The upper basket is designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as plates, small bowls
and shallow pans (as long as they are not too dirty).
Position the dishes and cookware so that they will
not get moved by the spray of water.

IN

Please be reminded that:

Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.

The Bottom Basket features folding spikes so that larger or more pots and pans can be loaded.

Adjusting the Upper Basket

The height of the upper basket can be adjusted in order to
create more space for large utensils both for the upper
/lower basket. The height of the upper basket can be
adjusted by placing the wheels on different height of the
rails. Long items, serving cutlery, salad servers and knives
should be placed on the shelf so that they do not obstruct
the rotation of the spray arms..

Lower positionLower position

Upper positionUpper position

Loading the Lower BasketLoading the Lower Basket

We suggest that you place large items and the most
difficult to clean items are to be placed into the lower
basket: such as pots, pans, lids, serving dishes and
bowls, as shown in the figure below. It is preferable to
place serving dishes and lids on the side of the racks
in order to avoid blocking the rotation of the top spray
arm.

IN

Folding back the cup shelives

For better stacking of pots and pans,
the spikes can be folded down as
show in the picture right.

Folding Spikes of Lower Basket

For better stacking of pots and pans,
the spikes can be folded down as
show in the picture right.

WheelsWheels

Cutlery BasketCutlery Basket

Cutlery should be placed in the cutlery basket with the handles at the bottom. If the rack has side baskets, the
spoons should be loaded separately into the appropriate slots, especially long utensils should be placed in the
horizontal position at the front of the upper basket as shown in the picture.

WARNING!

Do not let any item extend through the bottom.
Always load sharp utensils with the sharp point down!

For personal safety and a top quality cleaning, place the silverware in the basket

For personal safety and a top quality cleaning, place the silverware in the basket

making sure that:

making sure that:

They do not nest together.They do not nest together.
Silverware is placed with the handles-down.Silverware is placed with the handles-down.
But place knives and other potentially dangerous utensils are placed handles-up. But place knives and other potentially dangerous utensils are placed handles-up.

1010

6.Starting a washing program6.Starting a washing program

Wash Cycle TableWash Cycle Table

( )

NOTE:NOTE:

ProgramProgram

Intensive

For heaviest soiled crockery,
and normally soiled pots
pans dishes etc with dried
on soiling.

Means: need to fill rinse into the Rinse-Aid Dispenser.

Description

Cycle Selection

Cycle Selection

Information

Information

Description

of Cycle

of Cycle

Prewash 50
Wash 65
Rinse
Rinse
Rinse 55
Drying

pre/main

pre/main

Detergent

Detergent

5/25g
(or3in1)

Running

Running

time(min)

time(min)

140

Energy

Energy

(Kwh)

(Kwh)

1.45

Water

Water

(L)

(L)

19

Rinse

Rinse

Aid

Aid

Normal

(*EN 5 0242)

Glass

1 hour

Rapid

NOTE:NOTE:

For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.

This is standard programme, it is suitable
to clean normally soiled tableware and
it is the most efficient programme in
teams of its combined energy and water
consumption for that type of tableware.

For lightly soiled loads,

such as glasses,

crystal and fine china.

For lightly soiled loads that
do not need excellent drying
efficiency.

A shorter wash for lightly
soiled loads that do not
need drying.

*EN 5 0242 : This programme is the test cycle. The information for comparability test

in accordance with EN 50242, as follows:

Capacity: 12 setting
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
Pl:0.49w; Po:0.45w.

Prewash(45 )
Wash (55 )
Rinse
Rinse (65 )
Drying

Prewash
Wash (50 )
Rinse
Rinse(60 )
Drying

Pre-wash
wash(40 )
Rinse
Rinse(60 )
Drying

Prewash 50
Wash(60 )
Rinse (55 )
Drying

Wash (40 )
Rinse
Rinse (45 )

5/25g
(or3in1)

5/25g
(Or3in1)

5/25g

5/25g

20g

160

170

120

60

40

1.02

1.35

0.85

1

0.6

15

12

15

10

11.5

Turning On the ApplianceTurning On the Appliance

Starting a cycle wash

1

Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher ).

2

Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).

3

Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.

4

Open the door, press the Power button, to switch on the machine.

5

Press the program button , the wash program will be changed as follows direction:
Intensive->Normal->Eco->Glass->1Hour->Rapid;

If a program is selected, the response light will light. Close the door and thedishwasher begins to start.

1111

NOTE:NOTE:

When you open the door of dishwasher during washing, the running indicator will
stop blinking and the dishwasher will mooing every minute unless you close the
door to restart.

Change the Program...Change the Program...

1. A running cycle can only be modified if it has been running for a short time. If the detergent has
already been released and the water has already been drained out, the detergent dispenser must
be refilled.

2. Open the door carefully. When sprayers stop running, pless press the program button more than
3 seconds to cancel the running programme.

3. Select a new programme, then close the door to restart the dishwasher.

NOTE:NOTE:

If you open the door during a wash cycle , the machine will pause. The program light will
stop blinking and the buzzer will mooing every minute unless you close the door . After
you close the door ,the machine will keep on working after 10 seconds.

If your model has broken remember function, the machine will go on to finish the selected
program after the power cut.

Forgot to Add a Dish?Forgot to Add a Dish?

A forgotten dish can be added any time before the detergent cup opens.

1

Open the door a little to stop the washing.

After the spray arms stop working,you can open the door

2

completely.

Add forgotten dishes.

3

Close the door, the dishwasher will run

4

after 10 seconds.

At the End of the Wash CycleAt the End of the Wash Cycle

When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the Power switch button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.

Switch Off the Dishwasher

The program light is on but is not blinking, only in this case the programme has ended.

1.Switch off the dishwasher by pressing the Power button.

2.Turn off the water tap!

Open the door carefully.

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.

Unloading the dishwasher

It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.

Wash the arms in soapy and warm water and use a soft brush to

NOTE:NOTE:

WARNING! WARNING!

clean the jets. Replace them after rinsing them thoroughly.

When following this procedure from step1 to step 3, the filter system will be removed;
when following it from Step 3 to Step 1, the filter system will be installed.

It is dangerous to open the door when washing, because the hot water may scald you.

1212

7.Maintenance and Cleaning7.Maintenance and Cleaning

Filtering SystemFiltering System

The filter prevents larger remnants of food or other objects from getting inside the pum.
The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter,a flat (Main filter)
And a microfilter(Fine filter).

Main filter

2

1

3

Food and soil particles trapped in this filter are pulverized by a
special jet on the lower spray arm and washed down to drain.

Coarse filter

Larger items, such as pieces of bones or glass, that could block

the drain are trapped in the coarse filter. To remove the items

caught by the filter, gently squeeze the tap on the top of this

filter and lift out.

Fine filter

This filter holds soil and food residues in the sump area and

prevents it from being redeposit on the dishes during wash cycle.

1

2

3

Filter assembly

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle.
For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to
remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and
cup under running water. To remove the filter device, pull the cup handle in the upward direction.

nn

The dishwasher must never be used without the filters.

nn

WARNING! WARNING!

Improper replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.

1

2

NOTE:NOTE:

OpenOpen

Step 1 Turn the filter in anti-clockwise direction,

Step 2 lift the filter assy up

When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.

1313

Remarks:

- Inspect the filters for blocking after every time the dishwasher has been used.

- By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and
clean the filters under running water.

NOTE:NOTE:

The entire filter assembly should be cleaned once a week.

Cleaning the Filter

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figures
on the last page and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.

WARNING! WARNING!

When cleaning the filters, don't knock on them. Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.

Caring for the DishwasherCaring for the Dishwasher

The control panel can be cleaned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.

For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning The Door

To clean the edge around the door, you should use only a soft warm, damp cloth.
To avoid penetration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.

nn

Never use a spray cleaner to clean the door panel as it may damage the door lock
and electrical components.

WARNING! WARNING!

nn

Abrasive agents or some paper towels should not be used because of the risk of
scratching or leaving spots on the stainless steel surface.

Protect Against Freezing

please take frost protection measures on the dishwasher in winter. Every time after washing cycles,
please operate as follows

1.Cut off the electrical power to the dishwasher.

2.Turn off the water supply and disconnect the water inlet pipe from the water valve.

3.Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)

4.Reconnect the water inlet pipe to the water valve.

5.Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.

NOTE:NOTE:

If your dishwasher cannot work because of the ice,
please contact professional service persons.

Cleaning the Spray Arms

It is necessary to clean the spray arms regularly for hard
water chemicals will clog the spray arm jets and bearings.

To remove the upper spray arm, hold the nut, rotate the arm
clockwise to remove it.

OpenOpen

To remove the lower spray arm, pull out the spray arm upward.

Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.

1414

How to Keep Your Dishwasher in Shape

After Every Wash

After every wash, turn off the water supply to the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.

Remove the Plug

Before cleaning or performing maintenance, always
remove the plug from the socket.

No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, or a cleaning product made specifically for
dishwashers.

When not in Use for a LongTime

It is recommend that you run a wash cycle with the
dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door
seals to last longer and prevent odours from forming
within the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.

Seals

One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this
from occurring.

8.Installation instruction8.Installation instruction

Positioning the AppliancePositioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned either to the right or the left sides to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned for levelling, the height of the dishwasher
may be altered via adjustment of the screwing level of the feet. In any case,
the appliance should not be inclined more than 2 .

About Power ConnectionAbout Power Connection

For personal safety:

nn

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.

WARNING! WARNING!

Electrical Requirements

Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving
only this appliance.

nn

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE EARTHING
CONNECTION FROM THE POWER CORD.

Electrical Connection

Insure proper ground

exists before use

Ensure the voltage and frequency of the power being corresponds to
those on the rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a adaptors or the like as
they could cause overheating and burns.

GROUNDING INSTRUCTIONS

nn

This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of
electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a
cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local standards and requirements.

1515

nn

WARNING! WARNING!

Improper connection of the equipment earthing conductor can result in the risk of an
electric shock.

nn

Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed.

nn

Do not modify the plug provided with the appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician to install a proper outlet.

for personal safety:

nn

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.

nn

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE

CONNECTION

Water ConnectionWater Connection

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.

EARTHING

FROM THE POWER CORD.

WARNING! WARNING!

Please close the hydrant after using.

Drain hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the hose must be less than 1000mm.

PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, BPLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B

Front

NOTE
The top of the hose
must be less than
1000mm.

A

Counter

Drain pipe

1616

B

MAX 1000mm

40mm

How to Drain Excess Water From Hoses

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that is held outside and lower than the sink.

Water Outlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water drain hose is not kinked or squashed.

Extension Hose

If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

Syphon Connection

The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish.
The water drain hose should be fixed .

Start of Dishwasher Start of Dishwasher

The following things should be checked before starting the dishwasher.

1 The dishwasher is level and fixed properly
2 The inlet valve is open
3 There is a leakage at the connections of the conducts
4 The wires are tightly connected
5 The power is switched on
6 The inlet and drain hoses are knotted
7 All packing materials and printings should be taken out from the dishwasher

Attention:Attention:

After installation, please make sure to keep this manual.

The content of this manual is very helpful to the users.

1717

9.Troubleshooting Tips9.Troubleshooting Tips

Before Calling for Service Before Calling for Service

Review the charts on the following pages may save you from calling for service.

Problem Possible CausesWhat To Do

Dishwasher doesn't

start

Fuse blown, or the
circuit breaker acted

Power supply is not
turned on

Replace fuse or reset circuit breaker. Remove any other
appliances sharing the same circuit with the dishwasher

Make sure the dishwasher is turned on and the door is
closed securely.

Make sure the power cord is properly plugged into the
wall socket.

Technical
problems

General
problems

water not pumped

form dishwasher

Suds in the tub

Stained tub interior

White film on

inside surface

Water pressure is low

Door of dishwasher
not properly closed.

Kink in drain hose

Filter clogged

Kitchen sink clogged

Improper detergent

Spilled rinse-aid

Detergent with
colourant was used

Hard water minerals

Check that the water supply is connected properly and
the water is turned on.

Make sure to close the door properly and latch it.

Check drain hose.

Check coarse the filter
(see section titled " Cleaning The Filter ")

Check the kitchen sink to make sure it is draining well.
If the problem is the kitchen sink not draining ,you may
need a plumber rather than a serviceman for dishwashers.

Use only the special dishwasher detergent to avoid suds.
If this occurs, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub. Close and latch the
dishwasher, then select any cycle. Dishwasher will drain
out the water at the first step.Open the door after draining
is stop and check if the suds is disappeared.
Repeat if necessary.

Always wipe up rinse-aid spills immediately.

Make sure that the detergent is the one without
colourant.

To clean the interior, use a damp sponge with
dishwasher detergent and wear rubber gloves.
Never use any other cleaner than dishwasher
detergent for the risk of foaming or suds.

Noise

There are rust

stains on cutlery

Knocking noise

in the wash cabinet

Rattling noise

in the wash cabinet

Knocking noise

in the water pipes

The affected items are
not corrosion resistant.

A programme was not
run after dishwasher
salt was added.
Traces of salt have
gotten into the wash cycle.

The lid of the softer
is loose

A spray arm is
knocking against
an item in a basket

Items of crockery
are loose in the
wash cabinet

This may be caused
by on-site installation
or the cross-section of
the piping.

1818

Always run the quick wash programme .
without any crockery in the dishwasher and
without selecting the Turbo function (if present),
after adding dishwasher salt.

Check the lip .Ensure the fix is fine.

Interrupt the programme, and rearrange the items
which are obstructing the spray arm.

Interrupt the programme,
and rearrange the items of crockery.

This has no influence on the dishwasher function.
if in doubt, contact a suitably qualified plumber.

Problem Possible Causes What To Do

The dishes

are not clean

The dishes were not
loaded correctly.

The programme was
not powerful enough.

Not enough detergent
was dispensed.

Items are blocking
the path of spray arms.

See notes in " Loading the Dishwasher Baskets ".

Select a more intensive programme.
See" Wash Cycle Table ".

Use more detergent, or change your detergent.

Rearrange the items so that the spray can rotate freely.

Unsatis

-factory
washing
result

Unsatis

-factory
drying
result

Cloudiness

on glassware

Black or gray

marks on dishes

Detergent left in

dispenser cups

The dishes

are not drying

The filter combination
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause
the spray arm jets
to get blocked.

Combination of soft
water and too much
detergent.

Aluminum utensils
have rubbed against
dishes.

Dishes block
detergent cups.

Improper loading

Too little rinse-aid

Dishes are removed
too soon

Wrong program
has been selected

Use of cutlery with
a low-quality coating

Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".

Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.

Use a mild abrasive cleaner to eliminate those marks.

Re-loading the dishes properly.

Load the dishwasher as suggested in the directions.

Increase the amount of rinse-aid/refill the rinse-aid
dispenser.

Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.

In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.

Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.

Error CodesError Codes

When some malfunctions come on, the appliance will display error codes to warn you:

Codes

E1

E4

Meanings

Longer inlet time.

Overflow.

1919

Possible Causes

Faucets is not opened, or water intake is
restricted,or water pressure is too low.

Some element of dishwasher leaks .

nn

If overflow occurs, turn off the main water supply before calling a service.

nn

WARNING! WARNING!

If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.

Technical InformationTechnical Information

(w

(w

h t

h t

it

it

he doo

he doo

60

60

0

0

r c

r c

lo

lo

s

s

ed

ed

)

)

5

9

9

8

85

845845

5

51

7

7

1

1

1

Height : 845mm
Width : 598mm

Depth : 600mm(with the door closed)

Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 12 place settings

2020

2020

Technical Data Sheet

Sheet of household dishwasher according to EU Directive 1059/2010:

Manufacturer

Type / Description

Standard place settings

Energy efficiency class

Annual energy consumption

11

22

Energy consumption of the standard cleaning cycle

Power consumption of off-mode

Power consumption of left-on mode

Annual water consumption

Drying efficiency class

Standard cleaning cycle

33

44

5 5

Program duration of the standard cleaning cycle

Noise level

Mounting

Could be built-in

SWAN

WQP12-7219

12

A+

291 kWh

1.02 kWh

0.45 W

0.49 W

3360 liter

A

ECO 50

170 min

49 dB(A) re 1 pW

Freestanding

Yes

Height

Width

Depth (with connectors)

Power consumption

Rated voltage / frequency

Water pressure (flow pressure)

84.5 cm

59.8 cm

60.0 cm

1760-2100W

220-240V~50Hz

0.4-10bar = 0.04-1MPa

NOTE

A + + + (highest efficiency) to D (lowest efficiency)

11

Energy consumption 291 kWh per year, based on 280 standard cleaning cycles using cold water fill and

22

the consumption of the low power modes. Actual energy consumption will depend on how the appliance is used.

33

Water consumption 3360 litres per year, based on 280 standard cleaning cycles. Actual water consumption
will depend on how the appliance is used.

A (highest efficiency) to G (lowest efficiency)

44

This program is suitable for cleaning soiled normally soiled tableware and that it is the

55

most efficient programme in terms of its combined energy and water consumption for
that type of tableware.

The device meets the European standards and the directives in the current version at delivery:

- LVD 2006/95/EC

- EMC2004/108/EC

- EUP 2009/125/EC

The above values have been measured in accordance with standards under specified operating conditions.
Results may vary greatly according to quantity and pollution of the dishes, water hardness,
amount of detergent, etc.

The manual is based on the European Union's standards and rules.

Loading the baskets according to En50242: Loading the baskets according to En50242:

1.Upper basket:1.Upper basket:

11

33

IN

11

2.Lower basket:2.Lower basket:

55

22

22

44

66

33

11

11

Cups

1

2

Saucers

3

Glasses

4

Small serving bowl

5

Medium serving bowl

6

Large serving bowl

7

3.Cutlery basket:

11

22

11
22 22 22
11

11

22

22

11

11
22 22 22

Soup spoons

1

Forks

2

Knives

3

11

22

11

44 44 44 44 44 44

88 77 33 33

44 44 44 44 44 44

55 55 55 55 55 55

33 33 33 33

55 55 55 55 55 55

Dessert spoons

5

Serving spoons

6

Serving forks

7

11

11

33

66

11

22

22

33 11

33

33
33 33

66

IN

1010

77

99

77

88

77

77

Dessert dishes

8

Dinner plates

9

Soup plates

10

Oval platter

Teaspoons

4

comparability tests

Information for

Information for

50242

with EN

with EN

Capacity: 12

Capacity: 12
Position of

Position of
Programme: ECOProgramme: ECO

Rinse aid

Rinse aid
Softener setting:

Softener setting:

50242

setting: 6

setting: 6

comparability tests

place settings

place settings

the upper

the upper

basket: lower

basket: lower

H4

H4

8

Gravy ladles

in accordance

in accordance

position

position