Page 1
FBF-3060L/R Veritek Barrier-Free Shower Floors With Fit-Flo™ Drain
Manufactured from Veritek®
(See page 2 for detailed information.)
FEATURES
• Will not mold or mildew, no grout to clean.
• Coordinates with other Swanstone or Veritek® shower and bath systems.
• “S” pattern molded into floor provides a slip-resistant surface.
®
• Made of Veritek
• Can be recessed for flush mounting or can be used with a ramp.
with no surface coating to chip or crack.
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
FBF-3060R
(shown)
Barrier-Free Shower Floors
Available in Right or Left Drain Placement.
Nominal Rough-In Dimensions
Model Size 60" 30" 8" 15"
FBF-3060L 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (left side drain)
FBF-3060R 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (right side drain)
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
SPECIFICATIONS
FBF-3060L/R Veritek® Barrier-Free Shower Floors With Fit-Flo™ Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
FBF-3060L FB03060LM 30" D x 60" W 64 – 66 x 36 x 10 14
(Left Drain) (762 mm x 1524 mm)
FBF-3060R FB03060RM 30" D x 60" W 64 – 66 x 36 x 10 14
(Right Drain) (762 mm x 1524 mm)
FBF-1260 FB01260 12" D x 60" W – Ramp 25 – 66 x 14 x 2 1.07
(306 mm x 1524 mm)
Includes: One code-approved compression-molded Veritek® shower floor with
molded-in Fit-Flo drain.
Packaging: Each floor packed in a rectangular carton.
SHOWER FLOORS
FBF-1260 Shower Ramp
COLORS
Solid Colors:
• White (010)
• Bisque (018)
• Bone (037)
ACCESSORIES
See page 72 for complete listing of all Universal Design accessories.
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet.
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.
Swan • St. Louis, MO 63101 • (800)325-7008 • swanstone.com • help@swanstone.com
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metalscouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
095-01-17
| 69
Loading...