Battery LifeGolf Mode – 6.5 hours / Time Mode – 40 days
USB interfaceSupported
Display size1.26” Transective 144x168 pixels
Water resistantYes IPX7
1.2 Accessories List
• USB Cable • Charging Station • AC charging adapter • User Manual
General Description of Hardware
2
1.3 Screen Display Description
Power/Backlight
Up
OK/Menu
Down
Key Description:
• Power/Backlight: Press and hold (3 seconds) to turn the device on and off. Press to
turn on backlight.
• OK/Menu: Press to select menu options and acknowledge messages. Press to switch
pages (Green View, Shot Distance, Scorecard, and Odometer) Press and hold to
open Main Menu.
• Up: Press to scroll up through menus, holes, and settings.
• Down: Press to scroll down through menus, holes, and settings.
3
General Description of Hardware
2. Getting Started
2.1 Power On/Off
02:19
PM
17-05-12
3. Time Mode
A
MON
Date
B
C
02:19
PM
17-05-12
A. Info Bar
B. 2nd Row - Time/Day
C. 3rd Row - Date
1. Press and hold [Power/Backlight] key for 3
MON
Date
1. From Time Mode page, press [Up] key to change 3rd
row to display 2nd Time Zone.
2. Press [Up] key again to change 3rd row to display Sunrise time.
3. Press [Up] key again to change 3rd row to display Sunset time.
4. Press [Up] key again to change 3rd row to display
Seconds.
5. Press [Up] key again to change 3rd row to display
Stopwatch.
6. To start Stopwatch, press [OK/Menu] key
7. To pause Stopwatch, press [OK/Menu] key again.
8. To reset the Stopwatch, press and hold [Down] key.
Getting Started Time Mode
seconds until the power in on.
2. The device will show the Start-Up logo rst
and into the Time Mode screen.
3. To turn off the device, press and hold the
[
Power/Backlight] key.
4
4. Using Swami on the Course(directions on page 6)
02:19
PM
17-05-12
Time Mode PageMain Menu Page
Ready
5
Using Swami on the Course
MON
Date
Play Golf
Odometer
Setting
Auto Searching...
Locating
Satellites...
River Run Gc
Brookwood Country Cl
Green Island Gc
Pineway Gc
4. Using Swami on the Course(Screen shots on page 5)
4.1 Getting Started
1. From Time Mode page, press and hold [OK/Menu] key to access
Main Menu page.
2. Use [Up] or [Down] key to select Play Golf and press [OK/Menu] key.
3. Device will begin to search for satellite signal, you can press [OK/Menu] key to
cancel request. (Note: When Swami is used for the rst time or has not been used
for a while, it may take a few minutes to locate satellites. If it has not located them
within 5 minutes, please turn watch completely off and try again).
4. When device has found the satellite, it will show a Ready icon, press the
[
OK/Menu] key to continue.
5. The device will begin auto searching the surrounding courses that the device
supports, you can press [OK/Menu] key to cancel request.
6. It will then list the nearest golf courses to choose from. Use [Up] or [Down] key
to select the golf course, then press [OK/Menu] key to continue.
7. Device will begin Play Mode and start at hole #1, user can press [Up] or
[
Down] key to switch the hole number. (see page 7 for Play Mode screen)
Using Swami on the Course
6
4.2 Play Mode
Current Hole Number
Indicates Par
for the Hole
4.3 Shot Distance
242
Yards
7
Using Swami on the Course
257
#2
242
4
228
1. From Green View page, press [OK/Menu] key to
switch to Shot Distance page.
2. Press [Down] key to reset distance to 0.
3. Press [Up] key to start marking.
4. Press [Up] key again to pause marking.
5. Press [Down] key to reset when nished.
6. Press [OK/Menu] key twice to return to Play Mode screen.
B
C
F
Distance to the Back
of the Green
Distance to the Center
of the Green
Distance to the Front
of the Green
4.4 Electronic Scorecard
S 3
Hole Number
#2
P 4
Total:
3/7 2
1. From Shot Distance screen, press [OK/Menu] key to switch to Scorecard screen.
2. Use [Up] or [Down] key to see scorecard for each hole.
3. To change the default par press and hold [Down] key to access Edit mode. Use [Up]
or [Down] key to change the par then press [OK/Menu] key.
4. Use [Up] or [Down] key to enter user score and press [OK/Menu] key.
5. To enter user score use [Up] or [Down] key to enter score and press [OK/Menu] key
6. To exit Edit mode, press and hold [Up] Key.
7. Score for the round will then update at the bottom of the screen.
8. Press [OK/Menu] key to return to Play Mode screen.
Using Swami on the Course
User Score
Par
Total Score for
round/ Total Par
for course
8
4.5 Odometer
1. From Time Mode or Play Mode, press and hold [OK/Menu]
key to access Main Menu.
2. Use [Up] or [Down] key to select Odometer and press
[
OK/Menu] key.
457.4
Yards
3. Press [Up] key to start Odometer. (Note: Will beep three times when ready)
4. Press [Up] key again to pause Odometer.
5. Press [Down] key to reset Odometer.
6. To exit Odometer, press and hold [OK/Menu] key to return
back to Main Menu.
7. Press and hold [OK/Menu] key again will return back to
Time Mode page.
4.6 Editing Front, Center & Back Green Locations
1. From Play Mode page, press and hold [Down] key to access
#2
4
14
29
9
Using Swami on the Course
B
C
F
Edit mode.
2. Use [Up] or [Down] key to select Back / Center / Front.
(Note: Yardage for Front, Center or Back will blink when
selected).
3. Next, stand with Swami Watch at the point of new green
location. (Example: If you are editing the back of the green,
stand with the Swami Watch at the point you wish to mark as
the new back of the green).
4.6 Editing Front, Center & Back Green Locations
4. Press [OK/Menu] key to remark. The new location where the
B
GPS unit is located should read “0” yards.
0
(Example: If you edited the back of the green, you are now
#2
4
14
29
standing 0 yards between you and the back of the green).
C
This change will be saved on your Swami Watch for future use.
5. Press and hold [Up] key to exit Remark mode.
F
(continued)
4.7 End Round
1. Press and hold [OK/Menu] key to return back to Main Menu will end the
golf round.
2. Press and hold [OK/Menu] key again to return back to Time Mode page.
Using Swami on the Course
10
5. Swami Settings
5.1 Alarm
1. From Time Mode page, press and hold [OK/Menu] key
Alarm
Time Format
Time
Daylight
Date Format
6. Use [Up] or [Down] key to set MM (00 ~ 59) and press [OK/Menu] key.
7. Use [Up] or [Down] key to set On/Off and press [OK/Menu] key.
8. Press and hold [OK/Menu] key to return back to Settings Menu.
5.2 Time Format
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Time Format and press [OK/Menu] key.
4. Use [Up] or [Down] key to set 12H/24H and press [OK/Menu] key.
5. Press and hold [OK/Menu] key to return back to Settings Menu.
11
Swami Settings
to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press
[
OK/Menu] key.
3. Use [Up] or [Down] key to select Alarm and press
[
OK/Menu] key.
4. Use [Up] or [Down] key to select Alarm 1/Alarm 2/Alarm 3
and press [OK/Menu] key.
5. Use [Up] or [Down] key to set HH (00 ~ 23) and press
[
OK/Menu] key.
5.3 Time
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Time and press [OK/Menu] key.
4. Use [Up] or [Down] key to select Time 1/Time 2 and press [OK/Menu] key.
5. Use [Up] or [Down] key to set Auto or Manual and press <OK/Menu> key.
6. If selecting Auto, you must be outdoors initially for this option to work properly. The
watch must be able to recieve a satellite signal in order to set the current time. After
the time is set, it will keep that time wherever you go.
7. If selecting Manual, use [Up] or [Down] key to set HH (00 ~ 23) and press
[
OK/Menu] key.
8. Use [Up] or [Down] key to set MM (00 ~ 59) and press [OK/Menu] key.
9. Press and hold [OK/Menu] key to return back to Settings Menu.
5.4 Daylight Saving Time
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Daylight and press [OK/Menu] key.
4. Use [Up] or [Down] key to select On/Off and press [OK/Menu] key
On = current time minus 1 hour.
5. Press and hold [OK/Menu] key to return back to Settings Menu.
Swami Settings
12
5.5 Date Format
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Date Format and press [OK/Menu] key.
4. Use [Up] or [Down] keys to change date format between DD-MM-YY
(Day/Month/Year), MM-DD-YY(Month/Day/Year) and YY-MM-DD (Year/Month/Day).
5. Press and hold [OK/Menu] key to return back to Settings Menu.
5.6 Date
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Date and press [OK/Menu] key.
4. Use [Up] or [Down] key to select Year and press [OK/Menu] key.
5. Use [Up] or [Down] key to select Month and press [OK/Menu] key.
6. Use [Up] or [Down] key to select Day and press [OK/Menu] key.
7. Press and hold [OK/Menu] key to return back to Settings Menu.
5.7 Language
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select desired Language and press [OK/Menu] key.
4. Press and hold [OK/Menu] key to return back to Settings Menu.
13
Swami Settings
5.8 Unit -
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Unit and press [OK/Menu] key.
4. Use [Up] or [Down] key to select Metric/Imperial and press [OK/Menu] key.
5. Press and hold [OK/Menu] key to return back to Settings Menu.
Change unit of measurement between yards and meters
5.9 Backlight
6. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
7. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
8. Use [Up] or [Down] key to select Backlight and press [OK/Menu] key.
9. Use [Up] or [Down] key to select Off/5s/10s/30s and press [OK/Menu] key.
10. Press and hold [OK/Menu] key to return back to Settings Menu.
5.10 Sound - Turn button sound On/Off
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Sound and press [OK/Menu] key.
4. Use [Up] or [Down] key to select On/Off and press [OK/Menu] key.
5. Press and hold [OK/Menu] key to return back to Settings Menu.
Swami Settings
14
5.11 Display Type - Invert screen colors between black and clear background
1. From Time Mode page, press and hold [OK/Menu] key to access Main Menu.
2. Use [Up] or [Down] key to select Settings and press [OK/Menu] key.
3. Use [Up] or [Down] key to select Display Type and press [OK/Menu] key.
4. Use [Up] or [Down] key to select Type 1/Type 2 and press [OK/Menu] key.
5. Press and hold [OK/Menu] key to return back to Settings Menu.
CAUTION
Global Position System (GPS) was developed and is managed by United States
Department of Defense (DOD) that is responsible for its normal operation and position
precision control; the U.S. is entitled to affect function or position precision of the whole
system without prior notication or announcement based on its political considerations
or safety of national defense.
In order to use SWAMI Watch correctly and safely, you must be aware of some specic
knowledge; please read the following attentions in the manual prior to operating the device:
• SWAMI Watch was only designed for the purpose of leisure and recreation and it isn’t
applicable for industrial or special measurement.
• SWAMI Watch is only an auxiliary device, so we will not take any legal liability of accidents
due to mistaken operation or wrong judgment by using SWAMI Watch for measurement.
Using Conditions
As Swami Watch uses GPS, the GPS features are available only in the places that can
receive satellite signals, excluding places indoor or in water.
15
Swami Settings Caution / Using Conditions
Charging Swami Watch
1. Place Swami Watch on charging station, make sure when docking the unit the black
arrow highlight in red on the charging station below (Image A) is pointing up toward the
buckle of the watch. Unit should rest in slot of charging station. (Reference Image B)
2. Plug charging station AC adapter into outlet. Next, press the left side button in toward
the watch until it locks into place. (Reference Image B). To release watch from charging
station press button in top right corner of charging station highlight in red (Image B).
3. Swami Watch has begun charging when the screen below (Image C) is shown. The
3 bars located in the battery icon will blink when charging. When fully charged, the
battery bars will stop blinking. Full charge takes about 4-5 hours.
Image AImage B
Charging Station
Note: If screen shown to the right (Image C)
is not shown on swami watch while locked in
charging station, the watch may not be properly
placed in charging station. Make sure watch is
placed as shown in the instructions above.
Image C
usb connect
Note: Charging station can charge the watch
through your computer by using the USB
end of the USB cable. Plug into USB port of
your computer to charge unit this way.
Charging Swami Watch
16
Warranty / Return Policy
SWAMI is warranted to be free from defects for up to 90 days from your purchase date.
Software updates are free of charge. Izzo cannot refund your purchase. Izzo will replace
any defective unit within the warranty period. Please call Swami Support at 800-777-7899
to request a Return Authorization. All defective product must be returned to:
Izzo Golf
1635 Commons Parkway
Macedon, NY 14502
Please include a note with your Name, Address, Phone # and the Return Authorization #.
Your replacement SWAMI will be shipped once we receive and diagnose the returned unit.
QUESTIONS & ANSWERS
SituationsPossible ProblemsSolutions
The device cannot be
started
A. Battery voltage is too low.
B. You didn’t press and hold the
[
Power/Backlight] key for 3
seconds.
A. Charge the battery.
B. Press and hold the
[
Power/Backlight] key until
the power is on.
The device cannot
detect satellites
17
Warranty / Questions & Answers
A. Time for accessing satellite
signal is not enough.
B. The device is being started
indoors.
A. Turn the Swami Watch off and
restart it, then try again.
B. Keep the device in an open space
without building shelter.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.