OPERATION MODES
Bluetooth mode
• Wireless data transfer via the Bluetooth protocol enables to connect speaker system
to compatible devises. Maximum radius of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
• Turn on the speaker system Bluetooth mode – press button e several times until the
indicator a will start blinking blue color frequently.
• It is necessary to select the search mode of devices with Bluetooth on a signal source
(telephone, no tebook, sma rtphone, e tc.). “SVEN PS-250BL” or “S VEN PS-270”,
massage will be displayed on the screen which is to be connected to*.
• When connection is successful, there will be a short beep and the indication of the
search mode on speaker system is over**.
• The indicator a blinks blue shortly during the data exchange with a device con-
nected via Bluetooth.
Radio mode
To i mprov e rad io recep tion , co nnec t th e ca ble 3.5 mm mini -jac k (i nclu ded) to the AUX n or
USB-microUSB cable (included) to the input m.
• Turn on the speaker system – press button e several times until, the radio mode will
not turn on. Short press the button h activates auto search mode. After scanning
completion, the first scann ed radio station will start to operate automatica lly. With
buttons g and i select a desired radio station.
МР3 player mode
Attention! The file system of a micro SD or USB flash carrier is FAT32. Maximum
volume is 32 GB. It is not recommended to use the micro SD Ultra Speed.
• Insert the USB flash or micro SD carrier into appropriate slot. If the speaker system is
in turned on position, the playback will start automatically. Playback/Pause modes are
switched over with the help of the button h. Tracks can be controlled by buttons g
(previous track) and i (next track).
The use in the wired mode (AUX)
• Speaker system can be used as an external device for amplifying any audio source
with a 3.5 mm output mini-jack. To do this, connect a cable mini USB, plug 3.5 mini-
jack to the audio output AUX n.
ENG
14
Portable Speaker System
with Bluetooth and FM-radio
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose the item name “SVEN PS-250BL” or “SVEN PS-270”
and the “connect” command on the source.