Radio mode (only for model PS-230)
To improve the radio signal reception quality, conne ct the USB-micro USB cable
(included) to the input a.
• Turn on the speaker system – press button f several times until, the radio mode will
turn on . Short p ress the butt on
j activates auto search mode. Aft er scanning
completion, the first scanned radio statio n will start to operate automatically. With
buttons
g and i select a desired radio station.
МР3 player mode
Attention! The file system of a micro SD or USB flash carrier is FAT32. Maximum
volume is 32 GB. It is not recommended to use the micro SD Ultra Speed.
• Insert the USB flash or micro SD carrier into appropriate slot. If the speaker system is
in turned on position, the playback will start automatically. Playback/Pause modes are
switched over with the help of the button
j. Tracks can be controlled by buttons g
(previous track) and i (next track).
Connecting an additional speaker
For models PS-230 and PS-330, you can connect an additional speaker:
• Turn on both speakers (long press h). On both speakers, the right indicator will
flash white light flashes.
• On one of the speakers, press and hold the button j until a beep sounds, then
release it. The speakers will conn ect with each other. The right indi cator on the
speaker will light steadily.
Note. At the subsequent inclusion of both speakers, they will be connected automa-
tically.
The use in the wired mode (AUX)
• Speaker system can be used as an external device for amplifying any audio source
with a 3.5 mm output mini-jack.
To do this, connect speaker system with a mini-jack to
mini-jack signal cable to the audio output AUX
d.
ENG
20
Portable Speaker System
with Bluetooth