Congratulations on choosing Suunto t1 as your training companion. The
Suunto t1 is a high-precision heart rate monitor designed to make your
training as beneficial and enjoyable as possible.
Suunto t1 makes heart rate zone training more illustrative than ever before,
accurately measures the calories you burn during the workout, and keeps
track of your training history. It also includes a number of advanced training
functions that enable the product to grow with your increasing demands.
This Users Guide is here to help you get the most out of your training with
Suunto t1. Please read through it to make using your new Suunto t1 even
more fun and interesting.
The buttons are named on the back of the device according to the functions they perform. However,
in this user's guide the names are simplified as shown in the table below.
Name in User's GuideName on back of device
UP+ / lap
ENTERMode
DOWN- / Light
BACKAlt / Back
STARTStart / Stop
In Totals and Summary, small arrows on the screen indicate the buttons that you can navigate
with. The buttons' functions depend on the length of the press. A short press is less than 1 second,
and a long press is more than 2 seconds. Throughout this user's guide, the following symbols are
used to indicate short and long presses.
Short press
Long press
4
1.1. Setting up Suunto t1
Carry on setting up the time, date,
units and your personal settings.
After this, Suunto t1 will go into
Time mode and will be ready for
operation.
Adjust with UP and DOWN buttons.
Accept with ENTER button.
When you press a button on your new Suunto t1 for the first time, you will be asked to define some
basic settings. Use the UP and DOWN buttons to change the values, accept and move to the next
item by pressing the ENTER button.
The figure below shows you how to set up your device for the first time.
NOTE
Your maximum heart rate is determined using the formula 210 minus 0.65
times your age, which is automatically calculated from the date of birth that
you enter. If you know your real maximum heart rate, you should use that
instead of the calculated value.
1.2. Activity class (act class)
Important: Your activity class is another one of the settings that you are asked to define when
you set up your device for the first time. Your activity class is a measure of your current activity
level. By entering your current activity class (1 - 10) into your Suunto t1, the device will be able to
5
give much more accurate calorie consumption information. As the amount and/or intensity of your
physical activity increases, you should keep your activity class updated by changing the value
when necessary. See the table below for information on determining your activity class.
Activity classActivity description
recreational sports or heavy physical
activity.
work requiring modest physical
activity, such as yard work, nordic
walking or moderate-intensity
cycling.
physical exercise, such as running,
aerobic classes or high-intensity
cycling.
exercise sufficiently to cause heavy breathing or
perspiration.
0Always avoid exertion, whenever possible.No regular participation in
1Walk for pleasure, routinely use stairs, occasionally
210 - 60 minutes per weekRegular participation in recreation or
3Over 1 hour per week
4Less than 30 minutes per weekRegular participation in heavy
530 - 60 minutes per week
61 - 3 hours per week
7Over 3 hours per week
7.55 - 7 hours per weekEndurance athlete (Regional level)
87 - 9 hours per week
8.59 - 11 hours per weekEndurance athlete (National level)
911 - 13 hours per week
6
level)
In Time mode you can:
- view time
- change shortcuts
- go to totals
- go to settings
In Training mode you can:
- use the stopwatch
- view your heart rate
- change shortcuts
- go to summary
- go to settings
In Settings menu you
can change values for:
- heart rate limits
- heart rate zones
- time and date
- general
- personal
Time mode
Training mode
Settings menu
1.3. Suunto t1 at a glance
Activity classActivity description
9.513 - 15 hours per weekEndurance athlete (International
10More than 15 hours per week
7
In Time and Training modes, a long press of the ENTER button takes you to Settings. In Time
In Summary you can view
your last session’s:
- duration
- calorie consumption
- average heart rate
- peak heart rate
- time spent in and out
of zones and limits
In Totals you can view
the total values of your
sessions for:
- this week
- last week
- this month
- last month
Summary
(from Training mode)
Totals
(from Time mode)
mode, a short press of the UP button takes you to Totals, whereas in Training mode, a short press
of the UP button accesses Summary. The figure below shows the functionality of both submodes.
1.3.1. Time mode
Here you can see the functionality of the buttons used in Time mode. This will help you get started
with using the basic functions of your Suunto t1. Additionally, you will find options for the shortcut,
which is in the bottom line of the display.
8
GO TO TOTALS
LIGHT
CHANGE SHORTCUT:
- DAY
- DATE
- SECONDS
- DUAL TIME
- EMPTY
GO TO SETTINGS
2 sec
The light
Pressing the BACK
button switches off
the alarm.
The light can be activated in both Time and Training mode at any point by short pressing the
DOWN button. If you want to use the light in Settings, Summary or Totals, the light must be activated
before entering them.
The alarm snooze
Only the BACK button deactivates the alarm; pressing any other button activates the snooze
function, which lasts for 5 minutes. The snooze function can be activated 12 times, after which the
alarm will be deactivated until the set time the following day.
1.3.2. Training mode
Here you can see the basic functionality of the buttons used in Training mode as well as options
for the shortcut, which is in the bottom line of the display.
9
LIGHT
CHANGE SHO
RTCUT:
- CALORIE
CONSUMPTION
-
AVERAGE HEART
RATE
START/STOP
LAP/RESET (LONG PRESS)
ENTER/SC
ROLL SUMMARY
GO
TO SETTINGS
2 sec
- LAP TIME
- TIME
-
ZONE (WHEN
SET
TO ON)
The stopwatch is accessed by pressing the START button in Training mode. It can be seen in the
Pressing the
START/STOP button
starts the stopwatch
and calculation of
amount of calories
consumed.
Pressing the
START/STOP
button again
stops the
stopwatch.
top row in Training mode. The information from the training that you time with the stopwatch, such
as heart rate and calorie consumption, is stored and can later be seen in Totals and Summary.
Therefore, you should activate the stopwatch, and ensure you have a heart rate reading,
whenever you start a training session.
While the stopwatch is running, you can take up to 99 lap times, the first 30 of which are stored
in the memory, by pressing the UP button.
1.3.3. Settings
Navigating in the Settings menu is very easy. Follow the position of the blinking empty box and
you will know exactly where in the Settings menu you are.
10
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.