SUUNTO FAVOR S User Manual
FAVOR S
INSTRUCTION MANUAL
www.suunto.com
Quick Reference Guide
Arrows:
Decompression Stop in the Ceiling Zone
Ascent Recommended
Must Descend
Ascent Rate Indicator
Current Time Display
Surface Interval/ No Flying Time
No-Decompression Time
Ceiling Depth/ Total Ascent Time
COM
Common Contact
COM
Temperature
Dive Counter
Maximum Depth During Diving
Day of the Month
Multifunctional Bar Graph:
Mode Indicator
Battery Power Indicator
Consumed Bottom Time
A
S
MAX
C
R
A
T
E
CEILING
SURF TIME NO DEC TIME
MAX
DIVE
HIS
LOG
ASC TIME
C
F
ALT SET PLAN
NO
A0
A1
A2
DIVE
TIME
m
TIME
TIME
MODE
MODE
PLAN
PLAN
ON
ON
Present Depth
Maximum Depth at the Surface
Fast Ascent Warning (SLOW)
Average Depth in the Logbook Mode
Do Not Fly Icon
Time Display/
Mode Selection Contact
Personal Adjustment/
Altitude Adjustment Mode
Activation/ Dive Planning
Contact
Low Battery Warning
Dive Time
Month
SUUNTO FAVOR S INSTRUCTION MANUAL
This instruction manual has been translated by YOUR COMPANY NAME from Suunto Oys original English instruction
manual. Suunto Oys liability is limited to the original text in English.
COPYRIGHT, TRADEMARK AND PATENT NOTICE
This instruction manual is copyrighted and all rights are reserved. It may not, in whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any media without prior written consent from SUUNTO.
SUUNTO and FAVOR S and their logos are registered or unregistered trademarks of SUUNTO. All rights are reserved.
CE
The CE mark is used to mark conformity with the European Union EMC directive 89/336/EEC. The SUUNTO dive
instruments fulfill all the required EU directives.
ISO 9001
SUUNTO Oys Quality Assurance System is certified by Det Norske Veritas to be according to the ISO 9001 in all SUUNTO
Oys operations (Quality Certificate No. 96-HEL-AQ-220).
SUUNTO Oy does not assume any responsibility for losses or claims by third parties, which may arise through the use of
this device.
Due to continuous product development the dive computer is subject to change without notice.
3
DEFINITION OF WARNINGS, CAUTIONS AND NOTES
Throughout this manual, special references are made when deemed important. Three classifications are used to separate
these references by their order of importance.
WARNING - is used in connection with a procedure or situation that may result in serious injury or death.
CAUTION - is used in connection with a procedure or situation that will result in damage to the product.
NOTE - is used to emphasize important information.
WARNING!
READ THIS MANUAL! Carefully read this instruction manual in its entirety, including Section 1, For Your Safety.
Make sure that you fully understand the use, displays and limitations of this dive computer. Any confusion resulting
from improper use of this device may cause diver to commit errors that may lead to serious injury or death.
WARNING!
ONLY DIVERS TRAINED IN THE PROPER USE OF SCUBA EQUIPMENT SHOULD USE THIS DIVE COMPUTER!
No dive computer can replace the need for proper dive training. Insufficient or improper training may cause diver to
commit errors that may lead to serious injury or death.
WARNING!
PERFORM PRECHECKS! Always check this instrument before diving in order to ensure that all LCD segments are
completely displayed, that the dive computer has not run out of battery power, and that the personal and altitude
adjustment mode is correct.
4
WARNING!
USE BACK-UP INSTRUMENTS! Make certain that you use back-up instrumentation including a depth gauge, submersible pressure gauge, timer or watch, and have access to decompression tables whenever diving with this instrument.
WARNING!
NO DIVE COMPUTER WILL PREVENT THE POSSIBILITY OF DECOMPRESSION SICKNESS (DCS)! All divers
must understand and accept that there is no procedure or dive computer that will totally prevent the possibility of a
decompression accident. For example, the individual physiological make up can vary within an individual from day to
day. The dive computer cannot account for these variations. As an added measure of safety, you should consult a physician
regarding your fitness before diving. Decompression sickness can cause serious injury or death.
WARNING!
NOT FOR PROFESSIONAL USE! SUUNTO dive computers are intended for recreational use only. The demands of
commercial or professional diving often expose the diver to depths and prolonged exposures including multiday
exposures that tend to increase the risk of decompression sickness. Therefore, Suunto specifically recommends that this
instrument is not used for commercial or other severe diving activity.
5
TABLE OF CONTENTS
QUICK REFERENCE GUIDE ...............................................................................................................
INTRODUCTION ................................................................................................................................... 8
1. FOR YOUR SAFETY ......................................................................................................................... 10
2. GETTING ACQUAINTED WITH THE INSTRUMENT .................................................................. 17
2.1. WATER CONTACTS ................................................................................................................................................ 17
2.2. ACTIVATION ........................................................................................................................................................... 18
3. DIVING WITH THE DIVE COMPUTER ......................................................................................... 19
3.1 USE OF WATER CONTACT .................................................................................................................................... 19
3.2 BEFORE DIVING ..................................................................................................................................................... 21
3.2.1 Activation, Prechecks and Battery Warning ..................................................................................................... 21
3.2.2 Dive Planning ................................................................................................................................................... 24
3.2.3 Calendar Clock Function .................................................................................................................................. 25
3.3 DIVING ...................................................................................................................................................................... 26
3.3.1 Basic Dive Data ................................................................................................................................................ 26
3.3.2 Consumed Bottom Time (CBT) Bar Graph ...................................................................................................... 27
3.3.3 Ascent Rate Indicator ....................................................................................................................................... 28
3.3.4 Alarms .............................................................................................................................................................. 30
3.3.5 Decompression Dives ....................................................................................................................................... 31
6
2
3.4 AT SURFACE ............................................................................................................................................................ 35
3.4.1 Surface Interval ................................................................................................................................................ 35
3.4.2 Flying After Diving .......................................................................................................................................... 37
3.5 PERSONAL ADJUSTMENT AND HIGH ALTITUDE DIVES ............................................................................... 38
3.6 ERROR CONDITIONS ............................................................................................................................................. 40
4. MENU BASED MODES ..................................................................................................................... 42
4.1 LOGBOOK MEMORY.............................................................................................................................................. 43
4.2 DIVE HISTORY MEMORY...................................................................................................................................... 46
4.3 PERSONAL/ALTITUDE ADJUSTMENT SETTING .............................................................................................. 47
4.4 SETTING TIME AND DATE .................................................................................................................................... 48
5. CARE AND MAINTENANCE ........................................................................................................... 51
5.1 MAINTENANCE ....................................................................................................................................................... 52
5.2 BATTERY COMPARTMENT INSPECTION ........................................................................................................... 53
6. TECHNICAL DESCRIPTION ............................................................................................................ 54
6.1 OPERATING PRINCIPLES ...................................................................................................................................... 54
6.2 TECHNICAL SPECIFICATION ............................................................................................................................... 60
7. WARRANTY ....................................................................................................................................... 62
8. GLOSSARY ......................................................................................................................................... 63
7
INTRODUCTION
Congratulations on your choice of the SUUNTO Dive Computer.
It is a compact and sophisticated dive instrument that will give you years of trouble free and joyful diving. The dive computer
will provide you with important information that you will need during, between, and after your dives.
KEY FEATURES
The dive computer monitors and reports vital information such as your dive time, current depth, maximum depth, no-decompression time and ascent rate.
The dive computer will also give you information, if through carelessness or emergency you are forced to exceed the nodecompression limits for any dive.
The instrument has a built-in calendar and clock. It features versatile logbook memory capabilities and long-term historical
data. The instrument can be adjusted for diving at different altitudes or to add an extra level of conservativeness if desired.
The screen is protected against scratches and damage by a replaceable shield.
The dive computer is available either as a wrist unit with an optional protective boot or mounted in two gauge or three gauge
console or in a hose mounted boot. The modular construction allows for the separate compass module to be attached to the two
gauge console at a later stage.
8
METRIC AND IMPERIAL UNITS
All examples in this manual are shown in metric units, including meters and °C. The corresponding imperial units are shown
in brackets. The instrument is also available with imperial units, i.e. feet and °F.
WARNING!
VERIFY THAT THE UNITS OF MEASURE, WHETHER METRIC OR IMPERIAL, ARE CORRECT BEFORE
STARTING TO DIVE! Any confusion resulting from improper selection of units may cause the diver to commit errors
that may lead to serious injury.
9
1. FOR YOUR SAFETY
Always remember that THE DIVER IS RESPONSIBLE FOR HIS OR HER OWN SAFETY!
When used properly this dive computer is an outstanding tool for assisting properly trained, certified divers in planning and
executing standard and multi-level sport dives within the described no-decompression limits. It is NOT A SUBSTITUTE
FOR CERTIFIED SCUBA INSTRUCTION including training in the principles of decompression.
DO NOT attempt to use this dive computer without reading this entire Instruction Manual. If you have any questions about the
manual or the instrument itself, contact your Suunto dealer before diving with the dive computer.
BACK-UP INSTRUMENTS
WARNING!
USE BACK-UP INSTRUMENTS! Make certain that you use back-up instrumentation including a depth gauge,
submersible pressure gauge, timer or watch, and have access to decompression tables whenever diving with this dive
computer.
10
SHARING THE DIVE COMPUTER
WARNING!
THE DIVE COMPUTER SHOULD NEVER BE TRADED OR SHARED BETWEEN USERS WHILE IT IS IN
OPERATION! Its information will not apply to someone who has not been wearing it throughout a dive or sequence of
repetitive dives. Its dive profiles must match that of the user. If it is left on the surface during any dive, it will give
inaccurate information for subsequent dives.
No dive computer can take into account dives made without the computer. Thus any diving activity 48 hours prior to initial use
of the computer may give misleading information and must be avoided.
11
PERSONAL/HIGH ALTITUDE ADJUSTMENT
More information about this is given in Section 3.5, Personal Adjustment and High Altitude Dives.
WARNING!
SET THE CORRECT PERSONAL/ALTITUDE ADJUSTMENT MODE! When diving at altitudes greater than 700 m
[2300 ft] the personal/altitude adjustment feature must be correctly selected in order for the computer to calculate nodecompression status. The diver should also use this option to make the calculation more conservative, whenever it is
believed that factors which tend to increase the possibility of decompression sickness exist (see Section 3.5). Failure to
properly select the personal/altitude adjustment mode correctly will result in erroneous data and can greatly increase the
risk of decompression sickness.
WARNING!
THE INSTRUMENT IS NOT INTENDED FOR USE AT ALTITUDES GREATER THAN 2400 m [8000 ft]! Diving at
altitudes above this limit may significantly increase the risk of decompression sickness.
When diving at higher altitudes (above 700 m / 2300 ft), it is essential that the entered altitude mode, i.e. maximum altitude
limit of the dive computer, exceeds or is equal to the altitude of the dive site. The altitude mode indicator must show either A1
or A2, depending on the altitude. More information about this is given in Section 3.5, Personal Adjustment and High Altitude
Dives.
12
DECOMPRESSION DIVES
WARNING!
DO NOT USE THIS INSTRUMENT TO CONDUCT DECOMPRESSION DIVES! Suunto does not recommend this
instrument to be used to conduct decompression dives. However, if through carelessness or emergency a diver is forced
to exceed the no-decompression limits on a dive, the instrument will provide decompression information required for
ascent. After this the dive computer will continue to provide subsequent interval and repetitive dive information.
EMERGENCY ASCENTS
In the unlikely event that the instrument malfunctions during a dive, follow the emergency procedures provided by your
certified dive training agency or, alternatively, immediately ascend at a rate slower than 10 m/min [33 ft/min] to a depth
between 3 and 6 meters [10 to 20 ft] and stay there as long as your air supply will safely allow.
13
HIGHER RISK DIVE PROFILES
The user must understand that all decompression devices (decompression tables and/or dive computers) are based on
mathematical models and that many experts are currently concerned that these models may not under certain conditions
adequately describe the physiological phenomena. These conditions are presently identified as dives which incorporate the
following (Fig. 1.1):
SAWTOOTH PROFILES where the diver alternates between greater and shallower depths repeatedly
throughout the dive.
REVERSE PROFILES where the diver spends most of the dive at shallow depths and then descends to the
maximum depth shortly before surfacing.
CONSECUTIVE DIVES where the diver performs repetitive dives to approximately the same maximum
depth with only short surface intervals between dives. The risk of decompression
sickness increases when depth and the number of repetitive dives increase and
when the surface intervals are decreased.
MULTIDAY DIVES repetitive dives performed for several consecutive days.
DECOMPRESSION DIVES any dive during which the no-decompression limit has been exceeded or the diver
is advised by the computer that he may not return directly to the surface.
14
WARNING!
DIVE PRACTICES WHICH INCLUDE THE ABOVE DESCRIBED HIGHER RISK DIVE PROFILES ARE
BELIEVED TO INCREASE THE RISK OF DECOMPRESSION SICKNESS AND AS SUCH CONSIDERED
POTENTIALLY DANGEROUS AND SHOULD BE AVOIDED EVEN IF THEY CONFORM TO THE MATHEMATICAL MODEL!
WARNING!
DO NOT USE THE DIVE COMPUTER WITH NITROX MIX! The mathematical tissue calculation model of the
instrument has been designed for use with standard breathing air only (approximately 21% oxygen and 79% nitrogen by
volume). Therefore, the dive computer must not be used for diving with Nitrox or other mixed gases.
Sawtooth profiles
time
depth
Fig. 1.1 HIGHER RISK DIVE PROFILES Fig. 1.2 RECOMMENDED PROFILE
Reverse profiles
time
depth
Consecutive dives
Multiday dives
time
depth
depth
time
15
DIVE COMPUTER LIMITATIONS
While the instrument is based on current decompression research and technology, the user/ diver must realize that the
computer cannot monitor the actual physiological functions of an individual diver. All decompression schedules currently
known to the authors, including the U.S. Navy Tables, are based on a theoretical mathematical model which is intended to
serve as a guide to reduce the probability of decompression sickness.
The mathematical model uses an ascent rate of 10 m/min [33 ft/min]. Therefore it is critical that a proper ascent rate is
always used.
The reader/diver is forewarned that individual physiological differences, severe environmental conditions and predive
activities, especially those which tend to increase dehydration, may increase the risk of decompression sickness.
As a safety precaution Suunto recommends that divers using this instrument should maintain no less than 10 minutes nodecompression time remaining at all times during the dive. This is especially important for divers in poor physical condition,
in cold water or other strenuous conditions.
Historically divers have been advised to always include a margin of safety in their diving activities. Suunto supports these
practices and strongly recommends that the diver make the deepest portion of the dive near the beginning of the dive and
gradually progress into shallower depth, allowing time for a 3 to 5 minutes safety stop at a depth range of 3 to 6 meters
(10 to 20 ft). This is believed to be effective in further reducing the risk of decompression sickness.
Furthermore, the reader/diver is advised that any dive carries some risk of decompression sickness and neither the authors,
nor SUUNTO Oy will assume any responsibility or liability for accidents or injuries which might occur for any reason.
16
2. GETTING ACQUAINTED WITH THE DIVE COMPUTER
WARNING!
READ AND UNDERSTAND THE ENTIRE OWNERS MANUAL BEFORE DIVING! Failure to complete this step
may result in serious personal injury.
The purpose of this section is to provide the user with initial information to preview the operation of the computer. Since this
information is limited, it is imperative that you read and understand the entire owners manual before attempting to dive.
2.1 WATER CONTACTS
The dive computer has three water contacts on the face of the instrument:
COM: common contact
PLAN/ON: activation and dive planning contact
TIME/MODE: time display and mode selection contact
On the surface the instrument is operated by simultaneously touching the COM contact and one or two of the other contacts.
When doing this, your finger tips should be wet or moist to establish the necessary electric contact. When submerged these
contacts are automatically connected by the conductivity of the water.
17
Fig. 2.1 ACTIVATION
Touch the PLAN/ON and COM contacts
with moistened fingers.
A
S
MAX
C
R
A
T
E
A1
SURF TIME
LOG
C
HIS
DIVE
TIME
ALT SET PLAN
Fig. 2.2 READY DISPLAY
2.2 ACTIVATION
The calendar clock is always shown on the display, when the dive computer is
deactivated. In this mode the power consumption is minimal.
The instrument is activated by touching the PLAN/ON and COM contacts (Fig 2.1).
The first display, the STARTUP, shows all available elements and immediately after
this the battery power indicator. A few seconds later the READY display will appear,
showing zero values (Fig. 2.2).
At this time, perform a precheck making sure that the dive computer operates
correctly, that the low battery indicator is not on and that the personal/altitude
adjustment setting is correct.
If the battery symbol is displayed the dive computer should not be used (Fig. 2.3).
E
ALT SET PLAN
18
DIVE
TIME
Fig. 2.3 BATTERY WARNING
The battery symbol indicates that the battery
is too low for diving.
3. DIVING WITH THE DIVE COMPUTER
This section contains instructions on how to operate the dive computer and interpret
its displays. Each display has been carefully designed to provide important information you will need to plan your dive or dive series.
You will find that the instrument is easy to use and read. Each display shows only the
data relevant to that specific diving situation. For example, while you are on a dive,
surface interval data is irrelevant and therefore not shown. On the other hand, while
you are on the surface after a dive, remaining no-decompression time for that dive is
irrelevant and therefore replaced with information for your next dive.
3.1 USE OF WATER CONTACTS
As described in Section 2.1, Water Contacts, the dive computer is controlled with
the COM (common), PLAN/ON, and TIME/MODE contacts (Fig 3.1), as follows:
Activation: touch the PLAN/ON and COM contacts.
Dive planning: once the instrument has been activated, touch the
PLAN/ON and COM contacts.
Clock: once the instrument has been activated, touch the
TIME/MODE and COM contacts for two seconds.
The time is then displayed for four seconds.
a)
b)
c)
Fig. 3.1 USING THE WATER
CONTACTS
a) Activation and dive planning
b) Time display and menu based modes
c) Exit the modes
19
When the TIME/MODE and COM contacts are touched for over three seconds, the display will start to scroll through the
following modes. Lift your fingers when the desired mode is displayed:
Logbook memory: at LOG the logbook memory is accessed.
Dive history memory: at HIS the history memory is accessed.
Personal/altitude setting: at Alt the personal and/or altitude adjustment can be set.
Time setting: at Set the time and date can be adjusted.
Return: you can at any time exit the above modes by touching all three contacts at the same
time. First make contact between the PLAN/ON and TIME/MODE contacts, e.g. by
covering both contacts with your right thumb. Without lifting your right thumb, touch
the COM contact with your left thumb. Alternatively, you can exit the modes simply
by submerging the dive computer in water.
You may sometimes encounter problems in using the contacts, or the instrument may activate on its own. The reason for this
is probably contamination or invisible marine growth that may create an unwanted electric current between the water
contacts. It is therefore important that the dive computer be carefully washed in fresh water after the days diving is
completed. The contacts can be cleaned with a soft pencil eraser.
20
Loading...