SurgeX SA-20-AR Specification Sheet
SA-20-AR
© 2019 AMETEK Electronic Systems Protection. All rights reserved.
STANDALONE
SPECS v.030118
TECHNICAL DESCRIPTION
The SA-20-AR shall be a compact standalone unit in a magnetic shielding
steel enclosure. It shall operate from 120 volts AC and have a 9-foot,
grounded, 3-wire #12 line cord. There shall be 2 grounded AC receptacles.
Overall dimensions shall be 4.0" H x 10.2" W x 4.2" D. Weight shall be 8.5
pounds. The SA-20-AR shall have a load rating of 20 amps at 120 volts, a
self-test circuit with visual indicator, and provide EMI/RFI filtering. It shall
have remote control, scheduling, and AutoPing functions via wired Ethernet
HTTP, Telnet, and DxP protocols. It shall withstand at least 1000 occurrences
of surge pulse voltages up to 6000 volts.
SPECIFICATIONS
Load Rating
Voltage Rating
Power Requirement (no load)
Surge Let-through Voltage (6000 Volt Surge)
Maximum Applied Surge Voltage
Maximum Applied Surge Current
Maximum Applied Surge Energy
Endurance (C62.41-1991 category B3 pulses)
1RUPDOPRGHORDG
EMI/RFI Filter
&RPPRQ0RGHORDG
Under-Voltage Auto Shutdown
Over-Voltage Auto Shutdown
Over-Current Auto Shutdown
Over-Temperature Auto Shutdown
20A
120V
15 W
0 Volts
6000 Volts *
Unlimited (due to current limiting) *
Unlimited (due to current limiting) *
1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
> 20 dB, 38 kHz – 50 MHz
> 30 dB, 160 kHz – 50 MHz
25 dB @ 100 kHz; 39 dB @ 300 kHz;
60 dB @ 3 MHz; 44 dB @ 30 MHz
> 10 dB, 280 kHz – 50 MHz
> 20 dB, 1.7 MHz – 50 MHz
> 30 dB, 9 MHz – 27 MHz
11 dB @ 300 kHz; 19 dB @ 1 MHz;
26 dB @ 5 MHz; 34 dB @ 20 MHz
No
No
Circuit Breaker
None
Voltage NA
Measurement
Accuracy
Current NA
Power NA
Energy NA
Temperature NA
Network Port
Serial Port
Temperature Sensor Input
Auxiliary Relay Outputs
Contact Closure Input
Dimensions
Weight
Temperature Range:
Humidity Range
Agency Listings
Single 10/100 Unshielded Twisted Pair Ethernet Jack
None
None
No
No
4.0" H x 10.2" W x 4.2" D
8.5 lbs
5C to 35C
5% to 95% R.H. Non-condensing
Conforms to UL Stds 1283 & 1449
Certified to CSA Std C22.2 No. 8
* 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41
** Specifications subject to change without notice
SA-20-AR
SX-1115-RT
GROUND STUD
THIS SIDE, REF
A
Ready
Advanced Series Mode® Surge Eliminator / Power Conditioner
TOP VIEW
10.220
3.175
B
2.920
3.300
G
G
A
2.970
3.020
1.025
B
0.000
0.000
A
9.160
BRK
UP TO
BEND
RADII
X4
VERTICAL
EDGES
X2
BRK
0.810
A
REF
0.400
3.662
3.950
A A
SELF-TEST
COSMETIC SURFACES:
TOP AND (4) SIDES,
(4) FLANGES AROUND BEND RADII
SEE NOTE 3.
A
X2
5.910
2.765
0.733
H
1.900
FAR
WALL
4.350
2.522
A A
X2
3.910
2.360
F
BRK
1.235
2.000
A
F
I
H
0.450
1.479
X4
1.060
0.000
0.000
X2
2.000
0.000
BRK
2.100
4.200
0.000
BOTTOM
EDGE
0.000
1.500
3.660
0.660
REF
0.000
X2
A
0.400
2.100
E
A
X2
3.800
X2
v1.1
surgex.com
Loading...