Sure Heat Jenn-Air 38 User Manual
Jenn-Air Stainless Steel Grill:
38” Model
USE AND CARE MANUAL
FOR OUTDOOR USE ONLY
MADE IN THE USA
Jenn-Air is a registered trademark of the Maytag Corporation and is used under license to Lowe’s Companies Inc.
TABLE OF CONTENTS
GENERAL SAFETY INSTRUCTIONS.............................................................2
GRILL FEATURES..............................................................................................3
GRILL COMPONENTS LIST............................................................................4
INSTALLATION / ASSEMBLY..........................................................................5-7
GAS REQUIREMENTS.....................................................................................8-9
LEAK TESTING.................................................................................................10
USING THE GRILL...........................................................................................11-14
Lighting the Grill...................................................................................12
Rotisserie Usage.....................................................................................13-14
CARE & MAINTENANCE................................................................................15
TROUBLE SHOOTING.....................................................................................16-17
WARRANTY.........................................................................................................18
Please record Grill information for future reference and service work:
Model #:
Serial #:
Date of Purchase:
Gas Type:
Please retain this manual for future reference
GENERAL SAFETY INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
- Read this manual carefully before using your grill to reduce the risk of fire, burn hazard or other injury.
- Extreme care should be used because of the high temperatures produced by this appliance. CHILDREN
SHOULD NOT BE LEFT UNATTENDED IN AN AREA WHERE THE GRILL IS BEING OPERATED.
- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and
liquids. Do not allow flammable materials to come in contact with grate, burner or hot surfaces.
- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual.
A qualified service technician should conduct all other service.
- Follow the installation and servicing instructions provided with this product. Have your grill installed by a
qualified service technician. Locate the main gas supply valve so that you know how to shut the gas off to
your grill. If you smell gas, make sure all gas connections are tight before operation. If you continue to smell
gas call a qualified technician.
- When lighting a burner, always pay close attention to what you are doing. Be certain you are pushing the
ignitor that lights the burner you intend on using.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open lid.
4. If odor continues, immediately
call your
CALIFORNIA PROPOSITION 65 - WARN-
ING: The Burning of gas cooking fuels generates
some by products which are on the list of substances
which are known by the State of California to cause
cancer or reproductive harm. California law requires
businesses to warn customers of potential exposure to
such substances. To minimize exposure to these substances, always operate this unit according to the use
and care manual, ensuring you provide good ventila
tion when cooking with gas.
This appliance is not intended to be
installed in or on recreational vehicles or boats.
gas supplier.
-
TESTED IN ACCORDANCE WITH ANSI
Z21.58-1998/CGA
OUTDOOR COOKING GAS APPLIANCES.
THIS GRILL IS FOR OUTDOOR USE ONLY.
Check your local building codes for the proper
method of installation. In the absence of local
codes, this unit should be installed in accordance
with the National Fuel Gas Code No. Z223.1-1998
and the National Electrical Code
70-1990
DO NOT
vapors and liquids in the vicinity of this or any other
appliance.
DO NOT
the “LIGHTING INSTRUCTIONS” section of this
manual.
store or use gasoline or other flammable
try lighting this appliance without reading
1.6-M98 STANDARD FOR
ANSI/NFPA No.
FOR YOUR SAFETY
WARNING
2
GRILL FEATURES: JA38
1
2
3
4
5
6
7
8
9
3
10
12
11
1. Roll top grill hood 7. Handle
2. Grilling/Cooking surface 8. Warming shelf
3. Side Shelf
4. Control knob: back infrared burner 10. Electronic ignitor: main & rear infrared
5. Control knobs: main burners 11. Cart w/door
6. Convection vents 12. Ignitor access opening
9. Infrared back burner
burners
3
GRILL COMPONENTS LIST
Cart Parts
2 L-shaped side pieces
1 U-shaped back side piece
1 Base
2 Wheel channels
Cart Door Parts
1 Door with handle
1 Magnetic door catch
1 Nylon bushing
1 Nylon shoulder washer
2 Hex head screws
Grill Parts
1 Stainless steel grill head
2 Stainless steel side shelves
1 Electronic ignitor (pre-installed on grill)
7 Flavor grids
3 Porcelain cooking grates
1 Stainless steel warming rack
1 Drip pan
1 Hose and regulator (LP models only)
Assembly Par
16 Hex head screws
12 Bolts
ts
4
INSTALLATION / ASSEMBLY
Note: Prior to assembly remove protective film from stainless steel parts
Cart Assembly
1. Attach the two L-shaped sides to the Ushaped back portion of the cart, making sure
the four holes face up & the key holes are on
the bottom, using the (8) self taping hex
head screws. (See Fig. 1)
Note: A power screwdriver is required to
install the screws-be cautious not to overtighten and strip the screws.
2. Set the base on the top of the cart assembly,
with large opening closer to back portion of
cart, and align the eight mounting holes. Then
set the 2 wheel channels on the base and
attach them using the (8) bolts provided, from
inside the cart upwards through wheel
channels. (See Fig. 2)
Note: Tighten the bolts securely & Set Cart Upright
Screws
Key Holes
Fig. 1
Fig. 2
Attaching Grill Head to Cart w/door
Use the following instructions to attach Grill to cart
with a door.
1. With the grill on its back, loosen all 4 bolts
on the bottom side of the grill. (See Fig. 3)
2. Using 2 self taping hex head screws,
attach the magnetic door catch in the 2 holes
in the bottom of the grill. (See Fig. 4)
Screw holes for
magnetic catch
Fig. 3
Bolts
Catch faces
towards front
of grill
Fig. 4
Screws under
edge of bracket
5
Loading...