Supersonic SC-309KB, SC-1007KB Quick Setup Manual

Quick Setup guide

Connect your Tablet to Keyboard & Case w/ Micro USB

Connect the Micro USB to

SC-1007KB/SC-309KB

Micro

USB w/Mini USB Adapter

Position the Tablet

with Keyboard & Case

Lift the back stand for laptop position

First, Push up latch holder on

top center, then place on
Bottom Holders, then slide in to

lock in Case to Tablet.

Connect Micro USB w/ Mini USB adapter

If your tablet requires Micro USB

Input remove Mini Adapter.

Comes With a Stylus Pen

May or may not function with your tablet

model, If you tablet requires a specific Stylus

Pen, that is Sold Seperately.

1.

2.

3.

Some model

Revision

don't come with this

Holder

A notification symbol "A",will come on

your notification area, you have a

"successful connection"

Connect the Micro USB to

Tablet's Micro USB port

The light indicators will flash once

when connect with Tablet, in some

tablet it will not flash at all.

If your tablet has a USB Mini port,connection Use the "Micro to Mini" adapter.

Test Keyboard Key Pad

Make sure your adapter is not loose

in any way.

Must be connected firmly to

establish a good connection.

NOTE: If Using the USB adapter, it will be best to

turn your tablet all the way around to have your
plugins on the top side on Keyboard & case, then
connect the adapter. You can still work that way,
your Tablet should rotate screen.

Connect to

tablet's

USB Port