Supersonic SC-1912 User Manual

19” LED TV COMPATIBLE

WITH DVD PLAYER

MODEL NO.: SC-1912

USER MANUAL

Please read this manual carefully before using,

and keep it for future reference.

IMPORTANT INSTRUCTIONS

Safety information

CAUTION:

DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

- TO PREVENT FIRE OR SHOCK HAZARD. DO NOT USE THIS POWER CORD WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

- TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION - LASER RADIATION WHEN OPEN, DO NOT STARE INTO BEAM. VENTILATION WARNING - THE NORMAL VENTILATION OF THE PRODUCT SHALL NOT BE IMPEDED FOR INTENDED USE.

The lightning flash and

arrow head within the

triangle is a warning

sign alerting you of

“ dangerous

voltage”inside the

product.

Always follow basic safety precautions when using electrical products, especially when children are present. WARNING: To avoid the risk of electrical shock, make sure the product is unplugged from the electrical outlet before relocating, servicing, or cleaning it.

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK. DO NOT

REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The exclamation

point within the

triangle is a warning

sign alerting you of

important

instructions

accompanying the

product.

Read all instructions before using

 Do not use this product near water.  Install the product in accordance with the operating instructions.  Do not set the product near heat sources, such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

 Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit the product.

 Where the MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

 Unplug the product during lightning storms or when unused for long periods of time.  The product shall not be exposed to dripping or splashing and that no objects filled

with liquids, such as vases, shall be placed on the product.

 Do not place in or expose the product to direct sunlight, extreme heat, humid or dusty

locations.

 Never operate this product if it has a damaged power cord or plug, do not work

properly, has been dropped, damaged, or exposed to moisture, water, or other liquids.

 Do not attempt to examine or repair this product yourself; take the product to a service

center for inspection and repair.

 Keep magnetic objects such as speakers, at a distance from the player.

LASER SAFETY

This set employs an optical laser beam system in the CD mechanism designed with built-in safeguards. Do not attempt to disassemble. Exposure to this invisible laser light beam may be harmful to the human eye. This is a Class-1 laser product. Use of controls, adjustments or procedures other than those specified herein may result in hazardous laser light beam exposure. This compact disc player should not be adjusted or repaired by anyone except qualified service personnel. The laser mechanism in the set corresponds to the stylus (needle) of a record player. Although this product uses a laser pick-up lens, it is completely safe when operated according to directions.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications. Such modifications could void the user's authority to operate the equipment.

1) Operate turning controls and switches as instructed in the manual.

2) Before turning on the power for the first time, make sure that the adaptor is properly installed.

3) Store your discs in a cool area to avoid damage from heat.

Battery Handling and Usage

● Keep batteries away from children and pets. Only adults should handle batteries.

● Never throw batteries into a fire or expose them to fire or other heat sources.

● Follow the battery safety and usage instructions.

DISC Handling and Maintenance

Handling precautions

 Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints,

dirt and scratches can cause skipping and distortion.

 Do not write on the label side with a ball-point pen or other writing utensils.  Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids.  Be careful not to drop or bend the disc.  Do not install more than 1 disc on the disc compartment.  Do not try to close the disc cover when the disc is not installed properly.  Be sure to store the disc in its exclusive case when not in use.

If the surface is soiled

Wipe gently with a soft, damp (water only) cloth. When wiping discs, always move the cloth from the center hole toward the outside, which will not cause distortion. (If you wipe the discs using a circular motion, circular scratches are likely to occur, which will cause distortion.)

If the disc is brought from a cold to a warm environment, moisture may form on the disc.

Wipe this moisture off with a soft, dry, lint-free cloth before using the disc.

Improper disc storage

You can damage discs if you store them in the following places:

 Areas exposed to direct sunlight  Humid or dusty areas  Areas directly exposed to a heat outlet or heating appliance

User Manual…………………………………………………………………………………………1 Remote Control……………..………………………………………………………………………1 AC Adaptor…………………………………………………………………….…………………….1 Car Adaptor……………………………………………….…………………………………………1

All the pictures in this manual are just for your reference, appearance and display should subject to the final product.

ACCESSORIES

TABLE OF CONTENTS

GETTING STARTED

IMPORTANT INSTRUCTIONS...........................................................................................1-3

ACCESSORIES.....................................................................................................................3

FEATURES............................................................................................................................5

GENERAL PARTS..............................................................................................................6-7

REMOTE CONTROL..........................................................................................................8-9

REMOTE CONTROL PREPARATION.................................................................................10

BASIC CONNECTION....................................................................................................11-15

OPERATIONS

BASIC OPERATIONS....................................................................................................16-29

Compatible with DVD..................................................................................................16-24

TV................................................................................................................................25-29

MAIN MENU...................................................................................................................30-36

TV MODE....................................................................................................................30-35

AV AND OTHER MODES................................................................................................36

PC/VGA MODE........................................................................................................36

FOR REFERENCE

MAINTENANCE...........................................................................................................37

WALL MOUNTING……………………………………………………………………..……37 STAND INSTALLATION……………………………………………………………………..……38

SPECIFICATIONS.......................................................................................................39

TROUBLESHOOTING............................................................................................40-41

REGION CODE SETTING……………………………………………………………………….41

FEATURES

19" LED DISPLAY

This player has a built-in 19” LED display window to provide clear vision and low radiation.

With Built-in DVD Player

Support Auto Program Scanning Function

Support Digital Broadcasting Reception

Support EPG (Electronic Program Guide) Function

Compatible with USB1 for Music and Photo Playback (TV Mode)

Compatible with USB2 and SD/MMC/MS Card for Movie, Music and Photo Playback (DVD Mode)

Support Multi-languages On Screen Display

Support Full Function Remote Control

Compatible with HDMI, PC AUDIO, VGA, YPbPR, CVBS and AUDIO L/R Input

Compatible with EARPHONE and COAXIAL Output

With Detachable Stand Holder

With External Antenna Jack

With Built-in Speakers

With Noise Reduction Function

MAIN UNIT

Front View

Back View

GENERAL PARTS

Side View

1. LED display screen

2. Remote control sensor / Power indicator - In standby mode the indicator light is red; when switching on the unit the indicator light is blue color.

3. Stand holder

4. VOL +/- button- To increase/decrease the volume level or move left/right.

5. CH +/- button- To select next/previous channel or move up/down.

6. MENU button- To enter menu setting page.

7. SOURCE button- To select the input source.

8. - To play or pause playing (DVD).

9. - To open or close the disc compartment.

10. POWER button- To turn the TV ON/OFF.

11. Disc slot- To insert a disc according to the silk screen on the side of this slot.

12. USB 2 input terminal- For multimedia playback (DVD).

13. SD/MMC/MS input terminal- For multimedia playback (DVD).

GENERAL PARTS

Back View

1. Power input terminal

2. USB 1 input terminal- For MUSIC/PHOTO playback (TV).

3. HDMI input terminal

4. VGA input terminal

5. PC AUDIO input terminal

6. Y / Pb / Pr input terminals

7. RF input terminal- To connect the external antenna.

8. EARPHONE output terminal

9. CVBS and AUDIO L/R input terminals

10. COAXIAL output terminal

11. Built-in speakers

REMOTE CONTROL

1. POWER: To set the unit in standby mode; press

it again to switch it on.

2. MUTE: To mute the sound.

3. RED button / : To open or close the disc

compartment in DVD mode. GREEN button / GOTO: To play from a certain point in DVD mode. YELLOW button / ANGLE: To display the angle and change angle in DVD mode. BLUE button / A-B: To repeat playing between two specific points (A-B).

4. NUMBER BUTTONS (0-9): To input the number information, such as channel number and so on.

5. EPG: To display electronic program guide information.

6. INFO: To display current program information.

7. FREEZE: To hold the picture during normal

playing.

8. -/--: To select additional channels (digital) being broadcast by the same station. For example, to select channel “15-3”, press “1” and “5”, then press “-/--” and “3”.

9. SLEEP: To select desired Sleep Timer.

10. : To return to previous channel.

11. SOURCE: To switch the input source.

12. ASPECT: To select desired displaying mode.

13. OK: To confirm a selection.

14. Navigation buttons: Press ▲/▼/◄/►

buttons to move up/down/left/right.

15. MENU: To display the main menu. Press it again to return to previous menu page.

16. EXIT: To exit menu page.

17. PICTURE: To switch the picture mode.

18. VOL +/-: Press VOL+ button to increase the volume, or press VOL- button to decrease

the volume.

REMOTE CONTROL

19. CH+/-: Press CH+ button to play next channel,

or press CH- button to play previous channel.

20. SOUND / MEDIA: To switch the sound mode in TV mode; to switch the unit among DISC/CARD/USB in DVD mode.

21. CC / REPEAT: To set CC function On or Off in TV mode; to repeat playing chapter or title (for DVD) or track for (VCD/CD)

22. MTS/AUDIO / LANGUAGE: To select desired soundtrack in TV mode; to select desired soundtrack language for DVD mode.

23. C.LIST / D.MENU: To display available channels list page in TV mode; to return to the root menu (for DVD) or turn on/off the PBC (for VCD).

24. F.LIST / SETUP: To display the favorite channels list page in TV mode; to enter setup menu page in DVD mode.

25. FAVO / SUBTITLE: To label current program as a favorite one or not in TV mode; to select desired subtitle.

26. AUTO: To adjust the screen automatically (in PC mode).

27. : To play or pause playing.

28. : To move fast backward.

29. : To move fast forward.

30. ■■■■ : To stop playing.

31. : To play previous chapter.

32. : To play next chapter.

33. TITLE: To display the tile of current played

disc.

34. ZOOM: To enlarge/shrink the pictures in DVD mode.

35. D.DISP: To display playback information in DVD mode.

REMOTE CONTROL PREPARATION

Fig1 Fig2

Push

BATTERY INSTALLATION

Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1).

SERVICE LIFE OF BATTERIES

- The batteries normally last for one year although this depends on how often the remote control is used.

- If the remote control fails to work even when it is operated near the player, replace the batteries.

- Use two size AAA dry batteries.

NOTE:

● Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction.

● If the remote control is not going to be used for a long time, remove the batteries.

REMOTE CONTROL OPERATION

Point the remote control from no more than about 6m from the remote control sensor and within about 60°of the front of the player(Fig2).

NOTES:

- The operating distance may vary according to the brightness of the room.

- Do not point bright light at remote control sensor.

- Do not place objects between the Remote control and the remote control sensor.

- Do not use this remote control while simultaneously operating the remote control of any other equipments.

Open

Remote Control

Sensor

Press

● Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC adaptor.

● Read through the instructions before connecting other equipments.

BASIC CONNECTION

CONNECTING TO AC POWER SOURCE

To power outlet

AC adaptor

CONNECT EXTERNAL ANTENNA TO UNIT

Install external antenna into antenna jack for best picture.

Power plug of antenna amplifier

Indoor antenna amplifier

Antenna

Outdoor antenna amplifier

75 OHM antenna plug

COMPOSITE AV CONNECTION

AV cable (Optional)

For basic connection, use the composite Audio L/R (white/red) and CVBS cable to connect the unit with other devices.

YPbPr CONNECTION

YPbPr cable (Optional)

Back of DVD/VCR

AUDIO cable (Optional)

Back of DVD/VCR

HDMI CONNECTION

HDMI cable (Optional)

PC/VGA CONNECTION

VGA cable

(Optional)

Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.

Use HDMI cable to connect the unit with other devices to receive high-definition multimedia signal.

Back of DVD/VCR

Audio cable (Optional)

Back of DVR or PC

+ 30 hidden pages