Supermicro Super X7SPE-HF, Super X7SPA-H, Super X7SPA-HF, Super X7SPE-H, Super X7SPE-HF-D525 User Manual

X7SPA-L

USER’S MANUAL

Revision 1.2a

X7SPA-H

X7SPA-HF

X7SPE-HF

X7SPE-H

X7SPE-HF-D525

X7SPE-H-D525

X7SPA-H-D525

X7SPA-HF-D525

Manual Revision 1.2a

Release Date: February 17, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their
respective companies or mark holders.

Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu­mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all
claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, you are encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X7SPA and X7SPE motherboard product series. This product is intended

to be professionally installed and serviced by a technician.

About This Motherboard

The X7SPA and X7SPE motherboard product series are value-driven products

aimed at users who demand a reduced-cost, low-power motherboard for PC or

storage server applications.

The X7SPA and X7SPE series come in different model variations with different

CPU support. The X7SPA-L features a single-core Intel® ATOMTM D410 (1.66GHz,

10.0W) processor, while the X7SPA-H, X7SPA-HF, X7SPE-H, and X7SPE-HF sup-

ports the Intel ATOM D510 (Dual Core, 1.66GHz, 13.0W) processor. In addition,

four other models, the X7SPE-H-D525, X7SPA-HF-D525, X7SPA-H-D525 and the

X7SPE-HF-D525 are equipped with the Intel ATOM D525 (Dual Core, 1.8GHz,

13W) processor. Depending on the particular model, X7SPA and X7SPE series

SO-DIMM), up to 6 SATA ports, an on-board VGA, and up to 10 USB 2.0 ports.

These enable the X7SPA and X7SPE series to deliver cost-effective performance

in a small form- factor package.

This wide selection of processors and options make the X7SPA and X7SPE series

an excellent choice for system builders looking to standardize on a particular moth-

erboard line, at cost-effective price points.

Manual Organization

Chapter 1

and provides detailed information about the chipset. Chapter 2 provides hardware

installation instructions. Read this chapter when installing the processor, memory

modules and other hardware components into the system. If you encounter any

problems, see Chapter 3, which describes troubleshooting procedures for video,

memory and system setup stored in the CMOS. Chapter 4 includes an introduction

to the BIOS and provides detailed information on running the CMOS Setup utility.

Appendix A provides BIOS Error Beep Codes. Appendix B lists Driver Installa-

tion Instructions.

Preface

iv

X7SPA and X7SPE Motherboard Series User’s Manual

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury

Warning: Critical information to prevent damage to the components or

data loss.

Important: Important information given to ensure proper system installa-

tion or to relay safety precautions.

Note: Additional Information given to differentiate various models or pro-

vides information for correct system setup.

v

Contacting Supermicro

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Address: Super Micro Computer, Inc.

4F, No. 232-1, Liancheng Rd.

Chung-Ho 235, Taipei County

Taiwan, R.O.C.

Tel: [phone]

Fax: [phone]

Web Site: www.supermicro.com.tw

Technical Support:

Email: [e-mail]

Tel: [phone], ext.132 or 139

vi

X7SPA and X7SPE Motherboard Series User’s Manual

Table of Contents

Preface

About This Manual ........................................................................................................iii

About This Motherboard ................................................................................................iii

Manual Organization .....................................................................................................iii

Conventions Used in the Manual: .................................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

Checklist ..........................................................................................................1-1

X7SPA-L Image ...........................................................................1-2

X7SPA-H Image ..........................................................................1-3

X7SPA-HF Image ........................................................................1-4

X7SPE-H Image ..........................................................................1-5

X7SPE-HF Image .........................................................................1-6

X7SPE-H-D525 Image .................................................................1-7

X7SPE-HF-D525 Image ...............................................................1-8

X7SPA-H-D525 Image ..................................................................1-9

X7SPA-HF-D525 Image .............................................................1-10

Motherboard Layout (X7SPA-L, X7SPA-H, X7SPA-HF, X7SPA-H-D525,

X7SPA-HF-D525) ...........................................................................................1-11

Motherboard Layout (X7SPE-H, X7SPE-HF, X7SPE-H-D525, X7SPE-

HF-D525) .......................................................................................................1-12

X7SPA-L, X7SPA-H, X7SPA-HF, X7SPA-H-D525, X7SPA-HF-D525 Quick

Reference ......................................................................................................1-13

X7SPE-H/X7SPE-HF, X7SPE-H-D525, X7SPE-HF-D525, Quick Reference 1-14

Motherboard Features .................................................................................1-18

X7SPA/X7SPE Series Block Diagram ..........................................................1-21

1-2 Chipset Overview .........................................................................................1-22

I/O Controller Hub: ICH9R (X7SPA-H/X7SPA-HF, X7SPE-H/X7SPE-HF,

X7SPE-H-D525, X7SPE-HF-D525, X7SPA-H-D525, X7SPA-HF-D525) ......1-22

I/O Controller Hub: ICH9 (X7SPA-L) .............................................................1-22

1-3 PC Health Monitoring ....................................................................................1-23

Recovery from AC Power Loss .....................................................................1-23

Onboard Voltage Monitoring ........................................................................1-23

Fan Status Monitor with Software .................................................................1-23

CPU Overheat LED and Control ..................................................................1-23

........................................................................1-24

vii

Table of Contents

Slow Blinking LED for Suspend-State Indicator ...........................................1-24

BIOS Support for USB Keyboard..................................................................1-24

Main Switch Override Mechanism ................................................................1-24

1-5 Power Supply ................................................................................................1-24

1-6 Super I/O .......................................................................................................1-25

1-7 Overview of the Nuvoton BMC Controller (X7SPA-HF/X7SPE-HF/X7SPE-

HF-D525/X7SPA-HF-D525 only) ..............................................................................1-25

1-8 LVDS (X7SPA-L only)....................................................................................1-26

Chapter 2 Installation

2-1 Static-Sensitive Devices ..................................................................................2-1

Precautions .....................................................................................................2-1

Unpacking .......................................................................................................2-1

Tools Needed ..................................................................................................2-2

Location of Mounting Holes ............................................................................2-2

2-2 Motherboard Installation ..................................................................................2-2

Installation Instructions ....................................................................................2-3

2-3 System Memory ..............................................................................................2-4

How to Install SO DIMMs ...............................................................................2-4

Memory Support ..............................................................................................2-4

The SO DIMM Socket .....................................................................................2-5

2-4 Connectors/I/O Ports .......................................................................................2-6

Back Panel Connectors and I/O Ports ............................................................2-6

ATX PS/2 Keyboard and PS/2 Mouse Ports ..............................................2-7

Universal Serial Bus (USB) ........................................................................2-8

Serial Ports .................................................................................................2-9

VGA Connector ........................................................................................2-10

LAN Ports / IPMI .......................................................................................2-11

Front Control Panel .......................................................................................2-12

JF1 Header Pins ......................................................................................2-12

...............................................................2-13

Power LED ..............................................................................................2-13

HDD LED ..................................................................................................2-13

NIC1/NIC2 LED Indicators .......................................................................2-13

Overheat (OH)/Fan Fail LED....................................................................2-14

Power Fail LED ........................................................................................2-14

Reset Button ...........................................................................................2-15

Power Button ...........................................................................................2-15

NMI Button ..............................................................................................2-15

2-5 Connecting Cables ........................................................................................2-16

viii

X7SPA and X7SPE Motherboard Series User’s Manual

ATX Main PWR & CPU PWR Connectors ..............................................2-16

External Power Connector ......................................................................2-16

Fan Headers .............................................................................................2-17

Overheat/Fan Fail LED (JOH) ..................................................................2-18

Front Panel Audio Header (X7SPA-L Only) .............................................2-18

Chassis Intrusion .....................................................................................2-19

SATA DOM Power ....................................................................................2-19

Power SMB I2C Connector ......................................................................2-19

CD Header (X7SPA-L Only) .....................................................................2-20

SMB ..........................................................................................................2-20

T-SGPIO 0/1 Headers ..............................................................................2-20

LVDS Connector (X7SPA-L Only) ............................................................2-21

Inverter Power Connector (X7SPA-L Only) ........................................2-21

TPM Header(X7SPE-H-D525, X7SPE-HF-D525 Only)............................2-22

2-6 Jumper Settings ............................................................................................2-23

Explanation of Jumpers ............................................................................2-23

LAN Port Enable/Disable .........................................................................2-24

SMB (I2C) Bus to PCI Slots......................................................................2-24

CMOS Clear .............................................................................................2-25

USB Wake-Up (Not Available on the X7SPE-H-D525, X7SPA-H-D525,

X7SPA-HF-D525 and X7SPE-HF-D525) ..................................................2-26

TPM Support Enable (Not available on X7SPA-H-D525, X7SPA-HF-D525,

X7SPE-H-D525, X7SPE-HF-D525) ..........................................................2-27

Watch Dog Enable/Disable ......................................................................2-27

COM3 Redirection Select (OEM Option) .................................................2-27

Power LED/Speaker .................................................................................2-28

BMC (X7SPA-HF, X7SPE-HF, X7SPE-HF-D525, X7SPA-H-D525, X7SPA-

HF-D525 Only) ........................................................................................2-28

VGA Enable (X7SPA-HF, X7SPE-HF, X7SPE-HF-D525, X7SPA-HF-D525

only) ..........................................................................................................2-29

HDA/AC97 Select (X7SPA-L Only) .........................................................2-29

Power Force On Enable/Disable ..............................................................2-30

DCD / P5V Select ..................................................................................2-30

2-7 Onboard Indicators ........................................................................................2-31

LAN Port LEDs .........................................................................................2-31

2-8 Serial ATA and HDD Connections .................................................................2-32

SATA Connectors .....................................................................................2-32

ix

Table of Contents

Chapter 3 Troubleshooting

3-1 Troubleshooting Procedures ...........................................................................3-1

Before Power On ............................................................................................3-1

No Power ........................................................................................................3-1

No Video .........................................................................................................3-1

Memory Errors ...............................................................................................3-2

.......................................................3-2

3-2 Technical Support Procedures ........................................................................3-2

3-3 Frequently Asked Questions ...........................................................................3-3

3-4 Returning Merchandise for Service.................................................................3-5

Chapter 4 BIOS

4-1 Introduction ......................................................................................................4-1

Starting BIOS Setup Utility ..............................................................................4-1

.........................................................4-1

How to Start the Setup Utility .........................................................................4-2

4-2 Main Setup ......................................................................................................4-2

System Overview: The following BIOS information will be displayed: .......4-3

System Time/System Date ........................................................................4-3

Processor ...................................................................................................4-3

System Memory ........................................................................................4-3

......................................................................4-4

BOOT Feature ..............................................................................................4-4

Quick Boot ..................................................................................................4-4

Quiet Boot ..................................................................................................4-4

AddOn ROM Display Mode ........................................................................4-4

Bootup Num-Lock .......................................................................................4-5

PS/2 Mouse Support ..................................................................................4-5

Wait For 'F1' If Error ...................................................................................4-5

Hit 'Del' Message Display ..........................................................................4-5

Watch Dog Function ...................................................................................4-5

Power Button Function ...............................................................................4-5

Restore on AC Power Loss ........................................................................4-5

Interrupt 19 Capture ...................................................................................4-5

Standby Power in S5 .................................................................................4-6

.......................................................................................4-6

Clock Spread Spectrum .............................................................................4-6

Max CPUID Value Limit..............................................................................4-6

x

X7SPA and X7SPE Motherboard Series User’s Manual

Execute-Disable Bit Capability (Available when supported by the OS and

the CPU) .....................................................................................................4-6

Hyper-threading Technology .......................................................................4-6

Advanced Chipset Control............................................................................4-7

............................................................................4-7

DRAM Frequency .......................................................................................4-7

...............................................................4-7

DRAM CAS# Latency ...............................................................................4-7

DRAM RAS# to CAS# Delay ....................................................................4-7

DRAM RAS# Precharge .............................................................................4-7

DRAM RAS# Activate to Precharge ..........................................................4-7

Initiate Graphics Adapter ............................................................................4-7

Internal Graphics Mode Select ...................................................................4-7

X7SPE-H-D525 only) ......................................................................................4-8

DVMT Mode Select ....................................................................................4-8

DVMT/Fixed Memory .................................................................................4-8

Boot Display Device ...................................................................................4-8

Alternate Video BIOS .................................................................................4-8

Active State Power Management ...............................................................4-8

Reserved Page Route ................................................................................4-8

USB Functions ...........................................................................................4-8

Legacy USB Support (available if USB Functions above is Enabled).......4-8

USB Controller ...........................................................................................4-9

IDE/S ...............................................................................4-9

................................................................................4-9

SATA#1 as" above) ....................................................................................4-9

IDE Detect Timeout (sec) ...........................................................................4-9

Primary IDE Master/Slave,Secondary IDE Master/Slave,Third IDE

Master,Fourth IDE Master ..........................................................................4-9

...............................................................................4-11

Clear NVRAM ............................................................................................4-11

Plug & Play OS ........................................................................................4-12

PCI Latency Timer ....................................................................................4-12

PCI IDE Bus Master .................................................................................4-12

ROM Scan Ordering .................................................................................4-12

PCI Slot 1 .................................................................................................4-12

Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM 4-12

xi

.................................................................4-12

Serial Port1 Address/ Serial Port2 Address .............................................4-12

...................................................................4-13

Remote Access .......................................................................................4-13

Hardware Health ........................................................4-14

CPU Overheat Alarm ................................................................................4-14

CPU Temperature .....................................................................................4-14

System Temperature ................................................................................4-14

CPUFAN / SYSFAN Speed ......................................................................4-15

Fan Speed Control Modes .......................................................................4-16

CPU Vcore, AVCC, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3Vsb, and Vbat 4-16

.....................................................................................4-16

High Performance Event Timer ................................................................4-16

USB Device Wakeup ................................................................................4-16

PS/2 KB/MS WakeUp ...............................................................................4-16

ACPI Aware O/S .......................................................................................4-17

Suspend Mode .........................................................................................4-17

AMI OEMB Table ......................................................................................4-17

ACPI APIC Support ..................................................................................4-17

APIC ACPI SCI IRQ .................................................................................4-17

Headless Mode ........................................................................................4-17

ACPI Version Features .............................................................................4-17

HF-D525 Only) .............................................................................................4-17

IPMI Firmware Revision ...........................................................................4-17

Status of BMC ..........................................................................................4-18

IPMI Function ...........................................................................................4-18

View BMC System Event Log ..................................................................4-18

Clear BMC System Event Log .................................................................4-18

.............................................................................4-18

BMC Watch Dog Timer Action .................................................................4-19

.............................................................................4-19

View Event Log ........................................................................................4-19

Mark all events as read ............................................................................4-19

Clear event log .........................................................................................4-19

PCIE Error Log .........................................................................................4-19

4-4 Security Settings ...........................................................................................4-20

Supervisor Password ..............................................................................4-20

User Password: ........................................................................................4-20

Table of Contents

xii

Change Supervisor Password ..................................................................4-20

Change User Password ...........................................................................4-21

Boot Sector Virus Protection ....................................................................4-21

4-5 Boot Settings ................................................................................................4-22

Boot Device Priority ....................................................................................4-22

Hard Disk Drives ........................................................................................4-22

Removable Drives ......................................................................................4-23

Retry Boot Devices ..................................................................................4-23

4-6 Exit Options ...................................................................................................4-23

Save Changes and Exit ...........................................................................4-23

Discard Changes and Exit ......................................................................4-24

Discard Changes ......................................................................................4-24

Load Optimal Defaults ..............................................................................4-24

Load Fail-Safe Defaults ............................................................................4-24

Appendix A POST Error Beep Codes

Recoverable POST Error Beep Codes ......................................................................A-1

Appendix B Software Installation Instructions

B-1 Installing Drivers ..............................................................................................B-1

.........................................................................B-2

X7SPA and X7SPE Motherboard Series User’s Manual

Chapter 1: Introduction

1-1

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail and to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

All the following items are included in the retail box only.

One (1) Supermicro Mainboard

Two (2) SATA cables (CBL-0044L)

One (1) I/O shield (MCP-260-00039-0N)

One (1) Supermicro CD containing drivers and utilities (CDR-X7-UP)

One (1) User's/BIOS Manual (MNL-1166)

1-2

X7SPA and X7SPE Motherboard Series User's Manual

X7SPA-L Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-3

X7SPA-H Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

1-4

X7SPA and X7SPE Motherboard Series User's Manual

X7SPA-HF Image

Note: All graphics shown in this manual were based upon the latest PCB Revision

available at the time of publishing of the manual. The motherboard you've received

may or may not look exactly the same as the graphics shown in this manual.

Chapter 1: Introduction

1-5

X7SPE-H Image

Note: All graphics shown in this manual were based upon the latest PCB Revision

available at the time of publishing of the manual. The motherboard you've received

may or may not look exactly the same as the graphics shown in this manual.

1-6

X7SPA and X7SPE Motherboard Series User's Manual

X7SPE-HF Image

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

Chapter 1: Introduction

1-7

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

X7SPE-H-D525 Image

1-8

X7SPA and X7SPE Motherboard Series User's Manual

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

X7SPE-HF-D525 Image

Chapter 1: Introduction

1-9

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

X7SPA-H-D525 Image

1-10

X7SPA and X7SPE Motherboard Series User's Manual

Note: All graphics and images shown in this manual were based upon the latest

PCB Revision available at the time of publishing of the manual. The motherboard

you've received may or may not look exactly the same as the image shown in

this manual.

X7SPA-HF-D525 Image

Chapter 1: Introduction

1-11

Motherboard Layout (X7SPA-L, X7SPA-H, X7SPA-HF,

X7SPA-H-D525, X7SPA-HF-D525)

Important Notes to the User

Jumpers not indicated are for testing only.

See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

" " indicates the location of "Pin 1".

Üïé

ÖÐÉï

ÖÐÝí

ЦРЛНЮп

ÖÐÙï

ЦЮУЭп

ÖÐÔï

ÖÐÔîЦЧоЭп

ÖÑØï

ÖÔï

ÍÐï

õ

Öî

ЦЮЯМп

ЦРЭЧЫп

ЦЛНЮм

ЦЛНЮн

ЦФРЭир

ЦНУЮп

ÚßÒï ÚßÒî

ЦРЧоЭп

Öè

ЦКЩЯп

ÚßÒ

ЭСУН ЭФЫЯО

ÝÜó·²

ЯЛЬЧС ЪР

МуНЩРЧСо

МуНЩРЧСп

ЦНУЮпжНУЮ«-п

СТжЫТЯЮФЫЦЧоЭо
СЪЪжЬЧНЯЮФЫ

ЦЧоЭп

СЪЪжЬЧНЯЮФЫ

СТжЫТЯЮФЫ

ЦЮМпж

ÔßÒî

ÔßÒï

ЧуНЯМЯл

ЧуНЯМЯо

ЧуНЯМЯм

ЧуНЯМЯп

×óÍß

МЯнЧуНЯМЯр

НФСМп РЭЧуЫ Им шЧТ Ипк НФСМч

ÍÇÍ

ХЮсУСЛНЫ

ÝÑÓï ЦпрЦпп

Öïî

Öïí

1-12

X7SPA and X7SPE Motherboard Series User's Manual

Motherboard Layout (X7SPE-H, X7SPE-HF, X7SPE-H-D525,

X7SPE-HF-D525)

Important Notes to the User

Jumpers not indicated are for testing only.

See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front

panel connections.

" " indicates the location of "Pin 1".

Üïé

ÖÐÉï

ÖÐÙï

ЦЮУЭп

ÖÐÔï

ÖÐÔîЦЧоЭп

ÖÑØï

ÖÔï

ÍÐï

õ

Öî

ЦЮЯМп

ЦРЭЧЫп

ЦЛНЮм

ЦЛНЮн

ЦФРЭир

ЦНУЮп

ÚßÒï ÚßÒî

ЦРЧоЭп

Öè

ЦКЩЯп

ÚßÒ

ЭСУН ЭФЫЯО

МуНЩРЧСо

МуНЩРЧСп

ЦНУЮпжНУЮ«-п

СТжЫТЯЮФЫЦЧоЭо
СЪЪжЬЧНЯЮФЫ

ЦЮМпж

ÔßÒî

ÔßÒï

ЧуНЯМЯл

ЧуНЯМЯо

ЧуНЯМЯм

ЧуНЯМЯп

×óÍß

МЯнЧуНЯМЯр

ÍÇÍ

ХЮсУСЛНЫ

ÝÑÓï

X7SPE-H-D525 and X7SPE-HF-D525 Only.

Chapter 1: Introduction

1-13

Üïé

ÖÐÉï

ÖÐÝí

ЦРЛНЮп

ÖÐÙï

ЦЮУЭп

ÖÐÔï

ÖÐÔî

ЦЧоЭп

ÖÑØï

ÖÔï

ÍÐï

õ

Öî

ЦЮЯМп

ЦРЭЧЫп

ЦЛНЮм

ЦЛНЮн

ЦФРЭир

ЦНУЮп

ÚßÒï ÚßÒî

ЦРЧоЭп

Öè

ЦКЩЯп

ÚßÒ

ÝÑÓÍ ÝÔÛßÎ

ÝÜó·²

ЯЛЬЧС ЪР

МуНЩРЧСо

МуНЩРЧСп

ЦНУЮпжНУЮ«-п

СТжЫТЯЮФЫЦЧоЭо
СЪЪжЬЧНЯЮФЫ

ЦЧоЭп

СЪЪжЬЧНЯЮФЫ

СТжЫТЯЮФЫ

ЦЮМпж

ÔßÒî

ÔßÒï

ЧуНЯМЯл

ЧуНЯМЯо

ЧуНЯМЯм

ЧуНЯМЯп

ЧуНЯМЯн

ЧуНЯМЯ

ð

НФСМп РЭЧуЫ Им шЧТ Ипк НФСМч

ÍÇÍ

ХЮсУСЛНЫ

ÝÑÓï ЦпрЦпп

Öïî

Öïí

9

5

4

3

10

11

8

7

6

1

2

12

14

15

16

18

19

23

24

25

26

27

28

29

30

31

45

50

13

32

33

41

42

43

44

X7SPA-L, X7SPA-H, X7SPA-HF, X7SPA-H-D525, X7SPA-

HF-D525 Quick Reference

(not drawn to scale)

17

20 21

22

343536

Note 2: Jumpers that are not indicated are used for factory testing only.

1371

38

1

39

1

40

47

46

49

48

52

53

Note 1: USB 3/4, COM3/4 are available on the X7SPA-L only. LAN2 and

SATA 2/3 are available on the X7SPA-H, X7SPA-HF, X7SPE-H, X7SPE-

HF, X7SPA-H-D525, X7SPA-HF-D525, X7SPE-H-D525 and X7SPE-HF-

D525 only.

1-14

X7SPA and X7SPE Motherboard Series User's Manual

Üï

é

ÖÐÉï

ÖÐÙï

ЦЮУЭп

ÖÐÔï

ÖÐÔîЦЧоЭп

ÖÑØï

ÖÔï

ÍÐï

õ

Öî

ЦЮЯМп

ЦРЭЧЫп

ÖËÍÞ

ì

ÖËÍÞ

í

ЦФРЭир

ЦНУЮп

ÚßÒï ÚßÒî

ЦРЧоЭп

Öè

ЦКЩЯп

ÚßÒ

ЭСУН ЭФЫЯО

МуНЩРЧСоМуНЩРЧСп

ЦНУЮпжНУЮ«-п

СТжЫТЯЮФЫЦЧоЭо
СЪЪжЬЧНЯЮФЫ

ЦЮМпж

ÔßÒî

ÔßÒï

ЧуНЯМЯл

ЧуНЯМЯо

ЧуНЯМЯм

ЧуНЯМЯп

ЧуНЯМЯн

ЧуНЯМЯр

ÍÇÍ

ХЮсУСЛНЫ

ÝÑÓï

5

4

3

11

7

6

1

2

12

14

15

16

18

19

23

25

26

27

28

29

30

31

45

50

13

32

33

44

X7SPE-H/X7SPE-HF, X7SPE-H-D525, X7SPE-HF-D525,

Quick Reference

17

20

21

22

343536

Note 1: USB 3/4, COM3/4 are available on the X7SPA-L only. LAN2 and

SATA 2/3 are available on the X7SPA-H, X7SPA-HF, X7SPE-H, X7SPE-

HF, X7SPA-H-D525, X7SPA-HF-D525, X7SPE-H-D525 and X7SPE-HF-

D525 only.

Note 2: Jumpers that are not indicated are used for factory testing only.

1371

38

1

39

52

Chapter 1: Introduction

1-15

NumberConnectors Description

1 KB/Mouse PS/2 Keyboard/Mouse

2, 3 USB 1/2, USB 3/4Back Panel USB Ports (USB 3/4: X7SPA-L only)

4 COM1 Back Panel Serial Port

5 VGA

Video/Graphics Connector

6 LAN1 RJ45 Connector for LAN1

7 LAN2 RJ45 Connector for LAN2 (Not available on the X7SPA-L)

8 J5

Front Panel Audio Header Connector (Not available on the X7SPE
series)

10 CD1

CD/DVD Drive Audio Input Header (Not available on the X7SPE
series)

15 JL1 Chassis Intrusion Header

18 JBAT1 Onboard Battery

19 JPCIE1

PCI-E 1.1 x4 Gen1 (in x16 physical) Slot 7 (Slot 6 on X7SPE
series)

20 USB 5/6, 7/8 Front Panel USB headers

21 JTPM TPM Header (X7SPE-H-D525/X7SPE-HF-D525 Only)

22 USB 10 Type A on-board USB Port

23 USB 9 Front Panel USB header

25 JOH Overheat Warning LED header

26 J8

Power Connector for Add-on devices (Note: Do NOT plug the
power supply into this socket).

27 SATA 0,1,2,3,4,5 SATA Connectors (SATA 2/3 is not available on the X7SPA-L)

29 JWF1 SATA Disk on Module (DOM) Power

30 T-SGPIO-0/1 Serial General Purpose IO headers (for SATA)

31 JF1 FP Control Panel Header

32 JD1

External Buzzer/Speaker/Power LED
Pins 1-3 (Power LED), Pins 4-7 (External Speaker)

33 JPI2C PWR supply (I2C) System Management Bus

34 JPW1 ATX 24-Pin Power Connector

35 Unused Factory Test Point

36 JSMB1 System Management Bus header

38, 37 Fans 1, 2 Fan 1: CPU Fan, Fan 2: Chassis Fan Header

39, 40, 41

COM2, COM4,
COM3

Serial Port 2, 4 and 3 Headers (COM 3/4 X7SPA-L only)

45 SPK Onboard Speaker/Buzzer

48 J5 18-bpp LVDS LCD Monitor Port

49 J6 Inverter Connector

50 DIMM 1, DIMM 2 SO-DIMM Memory Slots

Ports and Connectors

1-16

X7SPA and X7SPE Motherboard Series User's Manual

NumberJumper Description Default Setting

9 JL2

AC97/HD Audio Selector
(Front Panel)

Open (HD Audio)

Closed (AC97)
12, 11 JI2C1/JI2C2 SMB to PCI Slots Open/Open (Disabled)
13 JPL2 LAN2 Enable/Disable Pins 1-2 (Enabled)
14 JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)

16 JPG1

On-board VGA Enable/Disable
(X7SPA-HF, X7SPE-HF and X7SPE­HF-D525 only)

Pins 1-2 (Enabled, use

on-board VGA device)

Pins 2-3 (Disabled, use

add-on VGA card)

17 JPB

BMC Enable/Disable (X7SPA-HF,
X7SPE-HF, and X7SPE-HF-D525 only)

Pins 1-2 (Enabled)

Pins 2-3 (Disabled)
24 JPUSB1 USB Wake-up Enable Pins 1-2 (Enabled)
28 JWD1 Watch Dog Timer

Pins 1-2 (Reset)

42 JPT1 Trusted Platform Module Enable

Pins 1-2 (Enabled)

Pins 2-3 (Disabled)

43 JPC3

COM3 Selection (OEM option for the
X7SPA-H, X7SPA-HF and X7SPE
series)

Pins 1-2 (RS232)

Pins 2-3 (TTL)

44 JBT1 CMOS Clear (See Chapter 2)

46 J12/J13

Pin 1 DCD/P5V Select (COM3/COM4)
(OEM option for the X7SPA-H, X7SPA­HF, and X7SPE series)

Pins 1-2 (DCD )

Pins 2-3 (P5V)

47 J10/J11

Pin 1 DCD/P5V Select (COM1/COM2)
(OEM option for the X7SPA-H, X7SPA­HF, and X7SPE series)

Pins 1-2 (DCD)

Pins 2-3 (P5V)

52 JPF Power Force On Open (Disabled)
53 J14 Reserved (Unused) Reserved (Unused)

Jumper Descriptions

Chapter 1: Introduction

1-17

Model USB Serial LAN Audio LVDSSATA IPMI RAID TPM

X7SPA-L

4 (rear)

1 (type A)

5 (header)

1 (rear)

3 (header)

LAN1

Front

Panel

Header

1 4 No No No

X7SPA-H

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6 No

Windows

(0,1,5,10)

Linux

(0,1,10)

No

X7SPA­HF

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6

Yes

(shared on

LAN1)

Windows

(0,1,5,10)

Linux

(0,1,10)

No

X7SPE-H

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6 No

Windows

(0,1,5,10)

Linux

(0,1,10)

No

X7SPE­HF

2 (rear)

1 (type A)

5 (header

1 (rear)

1 (header)

LAN1/

LAN2

None None 6

Yes

(shared on

LAN1)

Windows

(0,1,5,10)

Linux

(0,1,10)

No

X7SPE­H-D525

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6 No

Windows

(0,1,5,10)

Linux

(0,1,10)

Yes

X7SPE­HF-D525

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6

Yes

(shared on

LAN1)

Windows

(0,1,5,10)

Linux

(0,1,10)

Yes

X7SPA-H­D525

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6 No

Windows

(0,1,5,10)

Linux

(0,1,10)

No

X7SPA­HF-D525

2 (rear)

1 (type A)

5 (header)

1 (rear)

1 (header)

LAN1/

LAN2

None None 6

Yes

(shared on

LAN1)

Windows

(0,1,5,10)

Linux

(0,1,10)

No

Features

Model CPU Chipset VGA Graphics

X7SPA-L Intel ATOM D410Intel ICH9 Intel Graphics Media Accelerator GMA3150

X7SPA-H Intel ATOM D510Intel ICH9R Intel Graphics Media Accelerator GMA3150
X7SPA-HF Intel ATOM D510Intel ICH9R Matrox G200eW Graphics Accelerator
X7SPE-H Intel ATOM D510Intel ICH9R Intel Graphics Media Accelerator GMA3150
X7SPE-HF Intel ATOM D510Intel ICH9R Matrox G200eW Graphics Accelerator
X7SPE-H-D525 Intel ATOM D525Intel ICH9R Intel Graphics Media Accelerator GMA3150
X7SPE-HF-D525 Intel ATOM D525Intel ICH9R Matrox G200eW Graphics Accelerator
X7SPA-H-D525 Intel ATOM D525Intel ICH9R Intel Graphics Media Accelerator GMA3150
X7SPA-HF-D525 Intel ATOM D525Intel ICH9R Matrox G200eW Graphics Accelerator

1-18

X7SPA and X7SPE Motherboard Series User's Manual

Motherboard Features

Processor

X7SPA-L

Single Integrated Intel® ATOM™ D410 processor, 1.66 GHz, 10 Watts, 512KB

L2 cache, Single Core, Dual Threads.

X7SPA-H, X7SPA-HF, X7SPE-H, X7SPE-HF

Single Integrated Dual-Core Intel® ATOM™ D510 processor, 1.66 GHz, 13

Watts, 2 x 512KB L2 cache, Dual Core, 4 Threads.

X7SPE-H-D525, X7SPE-HF-D525, X7SPA-H-D525, X7SPA-HF-D525

Single Integrated Dual-Core Intel® ATOM™ D525 processor, 1.8 GHz, 13

Watts, 2 x 512KB L2 cache, Dual Core, 4 Threads.

Memory

X7SPA-L, X7SPA-H, X7SPA-HF, X7SPE-H, X7SPE-HF

Supports up to 4GB of unbuffered 667/800 MHz Non-ECC DDR2 SO-DIMMs

in 2 sockets (1.8V, 256MB, 512MB, 1GB, 2GB)

X7SPE-H-D525, X7SPE-HF-D525, X7SPA-HF-D525, X7SPA-H-D525

Supports up to 4GB of unbuffered 800 MHz Non-ECC DDR3 SO-DIMMs in

2 sockets (1.5V, 256MB, 512MB, 1GB, 2GB)

Note: 1666 MHz and 1333 MHz memory may be used, but will operate at

800 MHz.

Chipset

X7SPA-L Only

Intel® ICH9

X7SPA & X7SPE Series

Intel® ICH9R

Integrated Graphics

X7SPA-L, X7SPA-H, X7SPE-H, X7SPE-H-D525, X7SPA-H-D525

Intel Graphics Media Accelerator GMA3150

X7SPA-HF, X7SPE-HF, X7SPE-HF-D525, X7SPA-HF-D525

Matrox G200eW Graphics Accelerator

Expansion Slots

One (1) PCI-E 1.1 x4 Gen1 (in x16 physical) slot

BIOS

32 Mb AMI BIOS®, SPI Flash BIOS