1000W 1U Redundant Power Supply with
Battery Backup Power (BBP®2) Specification
SUPPLY DC OUTPUT CHARACTERISTICS
EFFICIENCY
(from Power Supply)
19 pairs gold finger connector
HOLD UP TIME
(without charged battery)
PWOK 10ms at 70% of max Loading
12V
11ms at 70% of max loading
seconds at 500W
For Two Modules in Redundant:
60 seconds at 1000W
Dimension (W x L x H): 76 x 360 x 40 mm
Temperature, Input Under
Voltage
-1, IEC60950-1
CB Report
CE Low Voltage Directive
BSMI
ENVIRONMENTAL SPECIFICATIONS
BBP + Power Supply in One Module
Remote Battery and Power Supply Management
Internal Lithium Ion Battery:
Single Mode: 500W 1 minute hold up
Redundant Mode: 1000W 1 minute hold up
Disclaimer: Specification is subject to change without prior notice