Supermicro SBM-OPH-C4020, SBM-IBS-E3616, MBM-GEM-004, MBM-GEM-001, MBM-XEM-002 User Manual

8U/4U SuperBlade

MBM-GEM-001 2.5-Gbps/1 Gbps

Ethernet Switch Module

MBM-XEM-001 10 Gbps

Ethernet Switch Module

MBM-XEM-002 10 Gbps

Ethernet Switch Module

MBM-GEM-004 1 Gbps

Ethernet Switch Module

SBM-OPH-C4020

Omni-Path Architecture (OPA)

100-Gbps Ethernet Switch Module

SBM-IBS-E3616

InfiniBand

100-Gbps Ethernet Switch Module

™

Network System Options

User’ s Manual

Revison 1.0

8U/4U SuperBlade Network System Options User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accur ate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no
commitment to update or to keep current the information in this manual, or to notify any person or
organization of the updates. P lease Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software and documenta tion, is the
property of Supermicro and/or its licensors, and is supplied only un der a license. Any use or reproduction
of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIA L DAMAGES ARISING FROM THE USE OR INABILITY TO USE
THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF
REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governe d by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not
exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not insta lled and used in
accordance with the manufacturer’s instruction manual, may cause harmful interference with radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference,
in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

: This Perchlorate warning

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS
PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND
OTHER REPRODUCTIVE HARM.

SuperBlade User’s Manual
Release Date: October 3, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document.

Information in this document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or mark holders.

Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

ii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's network modules. Installation and maintenance
should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides an overview of this manual.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing 8U/4U SuperBlade
Network System Options.

Chapter 3: Setup and Installation

Refer here for details on installing the modules into a SuperBlade enclosure and for their
setup and configuration.

Chapter 4: Ethernet Modules

This chapter details all Ethernet switches for the SuperBlade system.

Appendix A: LED Descriptions

LED descriptions are summarized here in this appendix for quick reference.

iii

8U/4U SuperBlade Network System Options User’s Manual

Notes

iv

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Features..............................................................................................1-1

1-4 Contacting Supermicro.....................................................................1-2

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area ................................... .......................... ......................... .2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning .........................................................................2-14

Power Cable and AC Adapter ..............................................................2 -15

Chapter 3 Setup and Installation.................................................3-1

3-1 Installing/Removing a Switch Module............................................3-1

Installing a Switch Module ......................................................................3-1

Removing a Switch Module ....................................................................3-4

3-2 Configuring the Switch Module.......................................................3-4

Web-based Management Utility/IPMI .....................................................3-5

Network Connection.............................................................................3-5

Address Defaults..................................................................................3-7

3-3 Locating and Identifying Switches and Switch Ports
on a Blade Enclosure

Locating and Identifying a Switch on a Blade Enclosure ........................3-8

Locating and Identifying a Switch Port on a Blade Enclosure.................3-8

..............................................................................3-8

v

8U/4U SuperBlade Network System Options User’s Manual

Chapter 4 Ethernet Switch Modules..........................................4-1

4-1 MBM-GEM-001 Gb Ethernet Switch Module................................4-1

LED Indicators ........................................................................................4-2

Ports........................................................................................................4-2

4-2 MBM-GEM-004 Gb Ethernet Switch Module................................4-3

LED Indicators ........................................................................................4-4

Ports........................................................................................................4-4

4-3 MBM-XEM-001 10-Gb Ethernet Switch Mod ule........................... 4-5

LED Indicators ........................................................................................4-6

Ports........................................................................................................4-6

4-4 MBM-XEM-002 10-Gb Ethernet Switch Mod ule........................... 4-7

LED Indicators ........................................................................................4-8

Ports........................................................................................................4-8

4-5 SBM-IBS-E3616 100-Gb InfiniBand Switch Module....................4-9

LED Indicators ........................................................................................4-9

Ports......................................................................................................4-10

4-6 SBM-OPA-C4020 100-Gb Omni-path Switch Module...............4-10

LED Indicators ......................................................................................4-11

Ports......................................................................................................4-11

4-7 Mezzanine Cards ............................................................................4-12

AOC-IBH-X4ES Mezzanine EDR HCA Card................ .. ... ... ................4-12

AOC-OPA-WFR Mezzanine OPA Card.................................................4-13

Appendix A LED Descriptions ......................................................A-1

A-1 MBM-GEM-001 Gigabit Ethernet Module LED Descriptions.....A-1

A-2 MBM-GEM-004 Gigabit Ethernet Module LED Descriptions.....A-2

A-3 MBM-XEM-001 10-Gigabit Ethernet Module LED
Descriptions

A-4 MBM-XEM-002 10-Gigabit Ethernet Module LED
Descriptions

A-5 SBM-IBS-E3616 100-Gigabit InfiniBand Module LED
Descriptions

A-6 SBM-OPA-C4020 100-Gigabit OPA Module LED
Descriptions

..............................................................................................A-3

..............................................................................................A-4

..............................................................................................A-5

..............................................................................................A-6

vi

List of Figures

Figure 3-1. Installing a Switch Module..............................................................3-2

Figure 3-2. Blade Enclosure with Switch Modules Installed..............................3-3

Figure 3-3. Configuring the Switch Module.......................................................3-4

Figure 3-4. Blade Status Screen.......................................................................3-5

Figure 3-5. Blade System Screen.................... ... ... ....................................... ....3-6

Figure 3-6. Switch Panel...................................................................................3-6

Figure 4-1. MBM-GEM-001 Gb Ethernet Switch Module..................................4-1

Figure 4-2. MBM-GEM-004 Gb Ethernet Switch Module..................................4-3

Figure 4-3. MBM-XEM-001 10-Gb Ethernet Switch Modul e .............................4-5

Figure 4-4. MBM-XEM-002 10-Gb Ethernet Switch Modul e .............................4-7

Figure 4-5. SBM-IBS-E3616 100-Gb InfiniBand Switch Module.......................4-9

Figure 4-6. SBM-OPA-C4020 100-Gb Omni-path Switch Module..................4-10

Figure 4-7. AOC-IBH-X4ES Mezzanine EDR HCA Card................................4-12

Figure 4-8. AOC-OPA-WFR Mezzanine OPA Card........................................4-13

vii

8U/4U SuperBlade Network System Options User’s Manual

Notes

viii

List of Tables

Table 3-1. MBM-GEM-001 Switch Module Address Default Settings...............3-7

Table 3-2. Locating and Identifying a Switch in 820C Enclosure......................3-8

Table 4-1. MBM-GEM-001 Gb Ethernet Switch Module Interface....................4-1

Table 4-2. MBM-GEM-001 Gb Ethernet Switch Module Features....................4-2

Table 4-3. MBM-GEM-001 Gb Ethernet Switch Module Ports..........................4-2

Table 4-4. MBM-GEM-004 Gb Ethernet Switch Module Interface....................4-3

Table 4-5. MBM-GEM-004 Gb Ethernet Switch Module Features....................4-4

Table 4-6. MBM-GEM-004 Gb Ethernet Switch Module Ports..........................4-4

Table 4-7. MBM-XEM-001 10-Gb Ethernet Switch Module Interface ...............4-5

Table 4-8. MBM-XEM-001 10-GGbigabit Ethernet Switch Module Features....4-6

Table 4-9. MBM-XEM-001 Available Sw itch Module Ports...............................4-6

Table 4-10. MBM-XEM-002 10-Gb Ethernet Switch Module Interface .............4-7

Table 4-11. MBM-XEM-002 10-Gb Ethernet Switch Module Features.............4-8

Table 4-12. MBM-XEM-002 Gb Ethernet Switch Module Ports........................4-8

Table 4-13. SBM-IBS-E3616 100-Gb InfiniBand Switch Module Interface.......4-9

Table 4-14. SBM-IBS-E3616 100-Gb InfiniBan d Switch Module Features.......4-9

Table 4-15. SBM-OPA-C4020 100-Gb Omni-path Switch Mo dule

Interface..........................................................................................................4-10

Table 4-16. SBM-OPA-C4020 100-Gb Omni-path Switch Mo dule

Features..........................................................................................................4-10

Table 4-17. AOC-IBH-X4ES EDR HCA Mezzanine Card...............................4-12

Table 4-18. AOC-OPA-WFR OPA Mezzanine Card.......................................4-13

Table A-1. MBM-GEM-001 Gigabit Ethernet Switch LED Indicators ................A-1

Table A-2. MBM-GEM-004 Gigabit Ethernet Switch LED Indicators ................A-2

Table A-3. MBM-XEM-001 10-Gigabit Ethernet Switch LED Indicators............A-3

Table A-4. MBM-XEM-002 10-Gigabit Ethernet Switch LED Indicators............A-4

Table A-5. SBM-IBS-E3616 100-Gigabi t Ethernet Switch LED Indicators........A-5

Table A-6. SBM-OPA-C4020 100-Gigabit OPA Switch LED Indicators............A-6

ix

8U/4U SuperBlade Network System Options User’s Manual

Notes

x

Chapter 1

Introduction

1-1 Overview

The 8U/4U SuperBlade Network System Options User’s Manual contains information on
all network modules used for the 8U/4U Supermicro system. This incorporates
information on the Ethernet switch module for Ethernet.

1-2 Product Checklist of Typical Components

All modules are shipped alone or with a SuperBlade enclosure when ordered. Aside
from packaging, no cables or cords are included.

Please refer to our web site for information on operating systems that have been
certified for use with the SuperBlade (www.supermicro.com/products/SuperBlade/).

Note: For your system to work properly, please follow the links below to download all
necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information: http://www.supermicro.com/about/policies/

safety_information.cfm

• If you have any questions, please contact our support team at:

[e-mail]

Note: A complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm.

1-3 Features

See Chapter 4: " Ethernet Switch Modules" on page 4-1 for information on all Ethernet
switches.

1-1

8U/4U SuperBlade Network System Options User’s Manual

1-4 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]

Email:

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Tel: [phone]
Fax: [phone]
Website:

Email:

Asia-Pacific

Address: Super Micro Computer, Inc.

Tel: [phone]
Fax: [phone]
Website: www.supermicro.com.tw
Technical Support:
Email: [e-mail]

[e-mail] (General Information)

[e-mail] (Technical Support)

Het Sterrenbeeld 28, 5215 ML

‘s-Hertogenbosch, The Netherlands

www.supermicro.nl

[e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 23511

Taiwan (R.O.C)

1-2

Chapter 2: Standardized Warning Statements

Chapter 2

Standardized Warning Statements

2-1 About Standardized Warning Statements

The following statements are industry standard warnings, provided to warn the user of
situations which have the potential for bodily injury. Should you have questions or
experience difficulty , contact Supermicro's T echnical Support department for assistance.
Only certified technicians should attempt to install or configure components.

Read this appendix in its entirety before installing or configuring components in the
Supermicro chassis

These warnings may also be found on our web site at http://

www.supermicro.com/about/policies/safety_information.cfm.

Warning Definition

Warning!

This warning symbol means danger. You are in a situation that could cause

bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for preventing
accidents.

警告の定義

この警告サインは危険を意味します。

人身事故につながる可能性がありますので、いずれの機器でも動作させる前に、

電気回路に含まれる危険性に注意して、標準的な事故防止策に精通して下さい。

此警告符号代表危险。

您正处于可能受到严重伤害的工作环境中。在您使用设备开始工作之前，必须充分意识到
触电的危险，并熟练掌握防止事故发生的标准工作程序。请根据每项警告结尾的声明号码
找到此设备的安全性警告说明的翻译文本。

此警告符號代表危險。

您正處於可能身體可能會受損傷的工作環境中。在您使用任何設備之前，請注意觸電的危
險，並且要熟悉預防事故發生的標準工作程序。請依照每一注意事項後的號碼找到相關的
翻譯說明內容。

2-1

8U/4U SuperBlade Network System Options User’s Manual

ןןונקת תורהצהאהרהז

ןה תואבה תורהצהא ינפמ שמתשמה תא ריהזהל תנמ לע ,היישעתה ינקת יפ לע תורהז הלבח

ה וא תולאש שיו הדימב .תירשפא תיזיפי ,יהשלכ היעבב תולקתרוציל שי הכימת תקלחמ םע רשק

רידגהל וא ןיקתהל םיאשר דבלב םיכמסומ םיאנכט .ורקימרפוס לש תינכט תאה .םיביכר

אורקל שי .ורקימרפוס יזראמב םיביכרה תרדגה וא תנקתה ינפל ואולמב חפסנה תא

. ﻲﻓ ﻚﻧا نأ ﻦﻜﻤﯾ ﺔﻟﺎﺣ ﻲﻓ ﺐﺒﺴﺘﺗ ﺔﺑﺎﺻا ﺔﯾﺪﺴﺟ ﺰﻣﺮﻟا اﺬھ ﻲﻨﻌﯾ ﺮﻄﺧ !ﺮﯾﺬﺤﺗ

نأ ﻞﺒﻗ يأ ﻰﻠﻋ ﻞﻤﻌﺗ تاﺪﻌﻣ،ﻛﻢﻠﻋ ﻰﻠﻋ ﻦ ﻦﻋ ﺔﻤﺟﺎﻨﻟا ﺮطﺎﺨﻤﻟﺎﺑ ﺮﺋاوﺪﻟا

ﺔﯿﺋﺎﺑﺮﮭﻜﻟا

ﻛوﺔﯾارد ﻰﻠﻋ ﻦ رﺎﻤﻤﻟﺎﺑتﺎﺳ ﺔﯿﺋﺎﻗﻮﻟا ﻟ ﻊﻨﻤعﻮﻗو يأثداﻮﺣ

ﻢﻗر مﺪﺨﺘﺳا نﺎﯿﺒﻟا صﻮﺼﻨﻤﻟا ﺔﯾﺎﮭﻧ ﻲﻓ ﺮﯾﺬﺤﺗ ﻞﻛ رﻮﺜﻌﻠﻟ ﺎﮭﺘﻤﺟﺮﺗ

Warnung
WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu
Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren
elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen
vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen
Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten
Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de
manipular cualquier equipo, considere los riesgos de la corriente eléctrica y
familiarícese con los procedimientos estándar de prevención de accidentes. Al final de
cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en
el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES.

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation
pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un
équipement, soyez conscient des dangers liés aux circuits électriques et
familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents.
Pour prendre connaissance des traductions des avertissements figurant dans les
consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro
de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS.

안전을 위한 주의사항

경고 !

2-2

Chapter 2: Standardized Warning Statements

אורקל שי רוקמל תכרעמה רוביח ינפל הנקתה תוארוה תאחתמ.

이 경고 기호는 위험이 있음을 알려 줍니다 . 작업자의 신체에 부상을 야기 할 수 있는
상태에 있게 됩니다 . 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험
요소들을 확인하시고 사전에 사고를 방지할 수 있도록 표준 작업절차를 준수해 주시기
바랍니다 .

해당 번역문을 찾기 위해 각 경고의 마지막 부분에 제공된 경고문 번호를 참조하십시오

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwings symbool betekent gevaar. U verkeert in een situatie die lichamelijk
letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich
bewust te zijn van de bij een elektrische installatie betrokken risico's en dient u op de
hoogte te zijn van de standaard procedures om ongelukken te voorkomen. Gebruik de
nummers aan het eind van elke waarschuwing om deze te herleiden naar de
desbetreffende locatie.

BEWAAR DEZE INSTRUCTIES

Installation Instructions

Warning!

Read the installation instructions before connecting the system to the power

source.

設置手順書

システムを電源に接続する前に、設置手順書をお読み下さい。

警告
将此系统连接电源前 , 请先阅读安装说明。
警告

將系統與電源連接前，請先閱讀安裝說明。

Warnung

Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen
lesen.

¡Advertencia!

Lea las instrucciones de instalación antes de conectar el sistema a la red de
alimentación.

Attention

Avant de brancher le système sur la source d'alimentation, consulter les directives
d'installation.

2-3

8U/4U SuperBlade Network System Options User’s Manual

ﻟا تادﺎﺷرإ ﺮﻗاﺐﯿﻛﺮﺘ ﻞﯿﺻﻮﺗ ﻞﺒﻗ ﻰﻟإ مﺎﻈﻨﻟا ﺔﻗﺎﻄﻠﻟ رﺪﺼﻣ

לע ךמתסמ הז רצומנגהה תעינמל םינבמב תנקתומה יכ אדוול שי .ילמשח רצק

רצקה ינפמ ןגמה רישכמה ילמשחהמ רתוי אל אוה-250 V, 20 A

시스템을 전원에 연결하기 전에 설치 안내를 읽어주십시오 .

Waarschuwing

Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.

Circuit Breaker

Warning!

This product relies on the building's installation for short-circuit (overcurrent)

protection. Ensure that the protective device is rated not greater than: 250 V,
20 A.

サーキット・ブレーカー

この製品は、短絡（過電流）保護装置がある建物での設置を前提としています。

保護装置の定格が 250V、20A を超えないことを確認下さい。

警告
此产品的短路 ( 过载电流 ) 保护由建筑物的供电系统提供 , 确保短路保护设备的额定电流
不大于 250V,20A。
警告

此產品的短路 ( 過載電流 ) 保護由建築物的供電系統提供 , 確保短路保護設備的額定電
流不大於 250V,20A。

Warnung

Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw.
Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der
Schutzvorrichtung nicht mehr als: 250 V, 20 A beträgt.

¡Advertencia!

Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del
edificio. Asegúrese de que el dispositivo de protección no sea superior a: 250 V, 20 A.

Attention

Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit dépend
de l'installation électrique du local. Vérifiez que le courant nominal du dispositif de
protection n'est pas supérieur à :250 V, 20 A.

2-4

Chapter 2: Standardized Warning Statements

ﺞﺘﻨﻤﻟا اﺬھ ﻰﻠﻋ ﺪﻤﺘﻌﯾ تاﺪﻌﻣ ﺔﯾﺎﻤﺤﻟا ةﺮﯿﺼﻘﻟاﺮﺋاوﺪﻟا ﻦﻣ ﺎﮭﺘﯿﺒﺜﺗ ﻢﺗ ﻲﺘﻟا ﻲﻓ

ﻰﻨﺒﻤﻟا

20A, 250V : ﻦﻣ ﺪﻛﺄﺗ نأ ﻢﯿﯿﻘﺗ زﺎﮭﺠﻟا ﻟاﻲﺋﺎﻗﻮ ﺲﯿﻟ ﻦﻣ ﺮﺜﻛأ

경고 !

이 제품은 전원의 단락 ( 과전류 ) 방지에 대해서 전적으로 건물의 관련 설비에 의존합니
다 . 보호장치의 정격이 반드시 250V( 볼트 ), 20A( 암페어 ) 를 초과하지 않도록 해야
합니다 .

Waarschuwing

Dit product is afhankelijk van de kortsluitbeveiliging (overspanning) van uw electrische
installatie. Controleer of het beveiligde aparaat niet groter gedimensioneerd is dan
220V, 20A.

Power Disconnection Warning

Warning!

The system must be disconnected from all sources of power and the power

cord removed from the power supply module(s) before accessing the chassis
interior to install or remove system components.

電源切断の警告

システムコンポーネントの取り付けまたは取り外しのために、シャーシー内部にアクセ

スするには、

システムの電源はすべてのソースから切断され、電源コードは電源モジュールから取り

外す必要があります。

警告

在你打开机箱并安装或移除内部器件前 , 必须将系统完全断电 , 并移除电源线。

警告

在您打開機殼安裝或移除內部元件前，必須將系統完全斷電，並移除電源線。

Warnung

Das System muss von allen Quellen der Energie und vom Netzanschlusskabel getrennt
sein, das von den Spg.Versorgungsteilmodulen entfernt wird, bevor es auf den
Chassisinnenraum zurückgreift, um Systemsbestandteile anzubringen oder zu
entfernen.

2-5

8U/4U SuperBlade Network System Options User’s Manual

יילמשח קותינ ינפמ הרהזא

!הרהזא

למשחה תורוקמ לכמ תכרעמה תא קתנל שי ריסהל שיו קפסהמ ילמשחה לבכ תא

נקתה ךרוצל זראמה לש ימינפה קלחל השיג ינפלת רסה ואת .םיביכר

ﻞﺼﻓ ﺐﺠﯾ مﺎﻈﻨﻟا ﻊﯿﻤﺟ ﻦﻣردﺎﺼﻣ ﺔﻗﺎﻄﻟا ﺔﻟازإو ءﺎﺑﺮﮭﻜﻟا ﻚﻠﺳ ﻦﻣ ةﺪﺣو داﺪﻣا

ﺔﻗﺎﻄﻟا ﻞﺒﻗ

ﻰﻟإ لﻮﺻﻮﻟا ﺔﯿﻠﺧاﺪﻟا ﻖطﺎﻨﻤﻟا ﻟﻞﻜﯿﮭﻠ ﺔﻟازإ وأ ﺖﯿﺒﺜﺘﻟ تﺎﻧﻮﻜﻣ زﺎﮭﺠﻟا

¡Advertencia!

El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico
quitado de los módulos de fuente de alimentación antes de tener acceso el interior del
chasis para instalar o para quitar componentes de sistema.

Attention

Le système doit être débranché de toutes les sources de puissance ainsi que de son
cordon d'alimentation secteur avant d'accéder à l'intérieur du chassis pour installer ou
enlever des composants de systéme.

경고 !

시스템에 부품들을 장착하거나 제거하기 위해서는 섀시 내부에 접근하기 전에 반드시
전원 공급장치로부터 연결되어있는 모든 전원과 전기코드를 분리해주어야 합니다 .

Waarschuwing

Voordat u toegang neemt tot het binnenwerk van de behuizing voor het installeren of
verwijderen van systeem onderdelen, dient u alle spanningsbronnen en alle
stroomkabels aangesloten op de voeding(en) van de behuizing te verwijderen.

Equipment Installation

Warning!

Only trained and qualified personnel should be allowed to install, replace, or

service this equipment.

機器の設置

トレーニングを受け認定された人だけがこの装置の設置、交換、またはサービスを許
可されています。

警告
只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。
警告

只有經過受訓且具資格人員才可安裝、更換與維修此設備。

2-6