Supermicro AOC-SMG3-2H8M2-O operation manual

AOC-SMG3-2H8M2
User's Guide
Revision 1.0
The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor
!
assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: This product can expose you to chemica ls including lead, known to the State of California to cause ca ncer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical
systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: May 03, 2019
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part
of this document. Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2019 by Super Micro Computer, Inc. All rights reserved.
Printed in the United States of America

Preface

About this User's Guide

This user's guide is written for system integrators, IT technicians, and
knowledgeable end users. It provides information for the installation and use of the
AOC-SMG3-2H8M2 expansion card.

About this Expansion Card

The AOC-SMG3-2H8M2 is an M.2 SSD carrier card that connects up to two M.2
solid state drives (SSDs), and is built for use in TwinPro™ systems. It supports
SATA and NVMe, and three form factors: 22x42 mm, 22x60 mm, or 22x80 mm.
It can be pre-installed on a server, or can be ordered and added separately. M.2
solid-state technology is an optimized, high-performance scalable storage solution,
e󰀨ectively streamlined for enterprise and client systems that leverage the cutting-
edge capabilities of PCI Express.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB
revision available at the time of publishing. The card you have received may or may
not look exactly the same as the graphics shown in this user's guide.
Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
the AOC-SMG3-2H8M2 card to the manufacturer, the RMA number should be promi-
nently displayed on the outside of the shipping carton, and the shipping package
is mailed prepaid or hand-carried. Shipping and handling charges will be applied
for all orders that must be mailed when service is complete. For faster service, you
can also request a RMA authorization online http://www.supermicro.com/RmaForm/.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
iii
AOC-SMG3-2H8M2 Expansion Card User's Guide

Conventions Used in the User's Guide

Pay special attention to the following symbols for proper system installation and for
safety instructions to prevent damage to the system or injury to yourself.
Note: Additional information given for proper system setup.
iv

Contacting Supermicro

Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: marketing@supermicro.com (General Information)
support@supermicro.com (Technical Support)
Website: www.supermicro.com
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: sales@supermicro.nl (General Information)
support@supermicro.nl (Technical Support)
rma@supermicro.nl (Customer Support)
Website: www.supermicro.nl
Preface
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3992
Email: support@supermicro.com.tw
Website: www.supermicro.com.tw
v
AOC-SMG3-2H8M2 Expansion Card User's Guide
Table of Contents
Preface
About this User's Guide ................................................................................................iii
About this Expansion Card............................................................................................iii
An Important Note to the User ...................................................................................... iii
Returning Merchandise for Service ............................................................................... iii
Conventions Used in the User's Guide .........................................................................iv
Contacting Supermicro ...................................................................................................v
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Technical Specications .................................................................................. 1-1
General ............................................................................................................ 1-1
OS Support ..................................................................................................... 1-1
Physical Dimensions ....................................................................................... 1-2
Chapter 2 Hardware Components
2-1 Expansion Card Layout and Components ...................................................... 2-1
2-2 Major Components .......................................................................................... 2-1
2-3 Connectors and LEDs ..................................................................................... 2-2
M.2 Sockets ................................................................................................ 2-2
Activity and Fail LEDs ................................................................................ 2-3
2-4 Stando󰀨s ......................................................................................................... 2-4
Chapter 3 Installation
3-1 Static-Sensitive Devices .................................................................................. 3-1
Precautions ..................................................................................................... 3-1
Unpacking ....................................................................................................... 3-1
3-2 Installing Expansion Cards ............................................................................. 3-2
Removing the M.2 Carrier Card ................................................................................. 3-6
3-3 Additional Settings .......................................................................................... 3-7
vi
Loading...
+ 13 hidden pages