Supermicro AOC-SLG3-2E4T User Manual

AOC-SLG3-2E4T

User's Guide

Revision 1.1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

!

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.

Manual Revision 1.1
Release Date: January 04, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.

Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.

Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

Preface

About this User's Guide

This user's guide is written for system integrators, IT technicians, and

knowledgeable end users. It provides information for the installation and use of the

AOC-SLG3-2E4T expansion card.

About this Expansion Card

The Supermicro NVMe AOC-SLG3-2E4T is a low-prole, standard Gen 3.0 PCIe

x8 add-on card that features two internal NVMe OCuLink connectors for high-

performance storage connectivity. This HBA card is built on the latest PCIe NVMe

retimer technology. Streamlined for the growing demand for increased data through-

put and scalability requirements across the enterprise-class server platforms, this is

a cost-e󰀨ective storage solution that delivers maximum performance and reliability.

Perfect for near-line cache storage solutions which allow data to be staged before

moving down to its intended backend storage.

An Important Note to the User

Preface

All images and layouts shown in this user's guide are based upon the latest PCB

revision available at the time of publishing. The card you have received may or may

not look exactly the same as the graphics shown in this user's guide.

iii

AOC-SLG3-2E4T Expansion Card User's Guide

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

the AOC-SLG3-2E4T card to the manufacturer, the RMA number should be promi-

nently displayed on the outside of the shipping carton, and the shipping package

is mailed prepaid or hand-carried. Shipping and handling charges will be applied

for all orders that must be mailed when service is complete. For faster service, you

can also request a RMA authorization online http://www.supermicro.com/RmaForm/.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

iv

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Website: www.supermicro.nl

Preface

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Website: www.supermicro.com.tw

v

AOC-SLG3-2E4T Expansion Card User's Guide

Table of Contents

Preface

About this User's Guide ................................................................................................iii

About this Expansion Card............................................................................................iii

An Important Note to the User ...................................................................................... iii

Returning Merchandise for Service ...............................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1 Overview

1-1 Overview ......................................................................................................... 1-1

1-2 Technical Specications .................................................................................. 1-1

General ............................................................................................................ 1-1

OS Support ..................................................................................................... 1-1

Power Consumption ........................................................................................ 1-1

Physical Dimensions ....................................................................................... 1-1

Supermicro Supported Motherboards ............................................................. 1-1

Chapter 2 Hardware Components

2-1 Expansion Card Layout and Components ...................................................... 2-1

2-2 Major Components .......................................................................................... 2-2

2-3 Connectors ...................................................................................................... 2-3

OCuLink Connectors .................................................................................. 2-3

2-4 Jumpers ........................................................................................................... 2-4

Explanation of Jumpers .................................................................................. 2-4

Chapter 3 Installation

3-1 Static-Sensitive Devices .................................................................................. 3-1

Precautions ..................................................................................................... 3-1

Unpacking ....................................................................................................... 3-1

3-2 Before Installation ........................................................................................... 3-2

3-3 Installing the Expansion Card ......................................................................... 3-2

3-4 Installing the Drivers in Windows .................................................................... 3-4

3-5 Uninstalling the Drivers ................................................................................... 3-4

vi