Supermicro AOC-SLG3-2E4R User Manual

User's Guide

Revision 1.0b

AOC-SLG3-2E4R

User's Guide Revision 1.0b

Release Date: March 16, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.

Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.

Copyright © 2018 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

The information in this User's Guide has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this user's guide, or to
notify any person or organization of the updates. Please Note: For the most up-to-date version

of this user's guide, please see our Website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

Preface

About this User's Guide

This user's guide is written for system integrators, IT technicians, and

knowledgeable end users. It provides information for the installation and use of the

AOC-SLG3-2E4R expansion card.

About this Expansion Card

The Supermicro NVMe AOC-SLG3-2E4R features two internal NVMe connectors

(SFF 8643) for high-performance storage connectivity. This HBA card is built on the

latest PCIe NVMe redriver technology. The AOC-SLG3-2E4R is streamlined to meet

the growing demand for increased data throughput and scalability requirements

across the enterprise-class server platforms. It is a low power and cost-e󰀨ective

near-line storage solution that delivers maximum performance and reliability.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

revision available at the time of publishing. The card you have received may or may

not look exactly the same as the graphics shown in this user's guide.

Preface

iii

AOC-SLG3-2E4R Expansion Card User's Guide

iv

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

the AOC-SLG3-2E4R card to the manufacturer, the RMA number should be promi-

nently displayed on the outside of the shipping carton, and the shipping package

is mailed prepaid or hand-carried. Shipping and handling charges will be applied

for all orders that must be mailed when service is complete. For faster service, you

can also request a RMA authorization online http://www.supermicro.com/RmaForm/.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

v

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Website: www.supermicro.com.tw

Table of Contents

Preface

About this User's Guide ................................................................................................iii

About this Expansion Card............................................................................................iii

An Important Note to the User ...................................................................................... iii

Returning Merchandise for Service ...............................................................................iv

Contacting Supermicro ...................................................................................................v

Chapter 1 Overview

1-1 Overview ......................................................................................................... 1-1

1-2 Technical Specications .................................................................................. 1-1

General ............................................................................................................ 1-1

OS Support ..................................................................................................... 1-1

Power Consumption ........................................................................................ 1-1

Physical Dimensions ....................................................................................... 1-1

Chapter 2 Hardware Components

2-1 Expansion Card Layout and Components ...................................................... 2-1

2-2 Major Components .......................................................................................... 2-2

2-3 Connectors and LEDs ..................................................................................... 2-3

NVMe Connectors ...................................................................................... 2-3

2-4 Front Jumper Location and Settings ............................................................... 2-4

Explanation of Jumpers .................................................................................. 2-4

Chapter 3 Installation

3-1 Static-Sensitive Devices .................................................................................. 3-1

Precautions ..................................................................................................... 3-1

Unpacking ....................................................................................................... 3-1

3-2 Before Installation ........................................................................................... 3-2

3-3 Installing the Expansion Card ......................................................................... 3-2

3-4 Static-Sensitive Devices .................................................................................. 3-5

Precautions ..................................................................................................... 3-5

Unpacking ....................................................................................................... 3-5

3-5 Installing the Drivers in Windows .................................................................... 3-6

3-6 Uninstalling the Drivers ................................................................................... 3-6

AOC-SLG3-2E4R Expansion Card User's Guide

vi