Supermicro AOC-CTGS-i2T User Manual

AOC-CTGS-i2T

User's Guide

Revision 1.0c

The information in this user’s manual has been carefully reviewed and is believed to be accurate. The vendor

!

assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment
to update or to keep current the information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro
and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed,
except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,
SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING,
REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: This product can expose you to chemica ls including
lead, known to the State of California to cause ca ncer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation,
and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Manual Revision 1.0c

Release Date: June 04, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part

of this document. Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.

Printed in the United States of America

Preface

About this User's Guide

This user's guide is written for system integrators, IT technicians and

knowledgeable end users. It provides information for the installation and use of the

AOC-CTGS-i2T add-on card.

About this Add-on Card

The AOC-CTGS-i2T is the latest microLP 2-port 10Gbase-T controller for our com-

pact and high density MicroCloud and Twin series servers. With a compact design

and lower power consumption, it can t in small spaces while providing the highest

networking bandwidth for data centers. The AOC-CTGS-i2T with NC-SI allows cus-

tomers to monitor the servers remotely. Based on the latest Intel® X550 controller,

the AOC-CTGS-i2T is an excellent choice for customers who are looking to expand

their network connectivity with highest bandwidth.

An Important Note to the User

All images and layouts shown in this user's guide are based upon the latest PCB

Revision available at the time of publishing. The card you have received may or

may not look exactly the same as the graphics shown in this user's guide.

Preface

Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required before

any warranty service will be rendered. You can obtain service by calling your ven-

dor for a Returned Merchandise Authorization (RMA) number. When returning the

motherboard to the manufacturer, the RMA number should be prominently displayed

on the outside of the shipping carton, and the shipping package is mailed prepaid

or hand-carried. Shipping and handling charges will be applied for all orders that

must be mailed when service is complete. For faster service, you can also request

a RMA authorization online (http://www.supermicro.com/RmaForm/).

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alternation, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems.

iii

AOC-CTGS-i2T Add-on Card User's Guide

Confidential

Naming Convention for Networking Adapters

A O C – S T G N – i 2 S

Conventions Used in the User's Guide

Pay special attention to the following symbols for proper system installation and to

prevent damage to the system or injury to yourself:

Warning: Important information given to ensure proper system installation

or to prevent damage to the components or injury to yourself.

Note: Additional information given to di󰀨erentiate between various models

or provides information for correct system setup.

Naming Convention

1 – 2 3 4 – 5 6 7

Character Representation Options

1st Product Family AOC: Add On Card

2nd Form Factor S: Standard, P: Proprietary, C: MicroLP, U: UIO

3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 40G: 40GbE

4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350),

5th Chipset Manufacturer i: Intel, m: Mellanox, b: Broadcom

6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports

7th Connector Type (Optional) S: SFP+, T: 10GBase-T, Q: QSFP+

(40Gb/s), IBF: FDR IB (56Gb/s), IBQ: QDR IB (40Gb/s)

S: Sageville (X550)

SMC Networking Add-on Cards

Model Type Form Factor Controller Connection

AOC-MGP-i2 GbE SIOM Intel® i350 AM2 2 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 3.7

AOC-MGP-i4 GbE SIOM Intel® i350 AM4 4 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 4.4

AOC-MTGN-i2S 10GbE SIOM Intel® 82599ES 2 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 7.2

AOC-MTG-i4S 10GbE SIOM Intel® XL710-BM1 4 SFP+ (10Gb/port ) 3.622" (92mm) x 3.428" (87.08mm) 7

AOC-MTG-b2T 10GbE SIOM Broadcom® BCM57416 2 RJ45 (10GBase-T) 3.622" (92mm) x 3.428" (87.08mm) 11

AOC-MTG-i2T 10GbE SIOM Intel® X550-AT2 2 RJ45 (10GBase-T) 3.622" (92mm) x 3.428" (87.08mm) 13

AOC-MTG-i4T 10GbE SIOM 2x Intel® X550-AT2 4 RJ45 (10GBase-T) 3.622" (92mm) x 3.428" (87.08mm) 26

AOC-MHIBF-m1Q2G

AOC-MHIBF-m2Q2G

AOC-MHIBE-m1CG

AOC-MH25G-b2S2G 25GbE SIOM

AOC-MH25G-m2S2T 25GbE SIOM

AOC-M25G-m4S 25GbE SIOM Mellanox® ConnectX-4 Lx EN 4 SFP28 (25Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 20

AOC-M25G-i2S 25GbE SIOM Intel® XXV710 2 SFP28 (25Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 11.8

AOC-MHFI-i1C

FDR IB

GbE

FDR IB

GbE

EDR IB

GbE

Omni-

Path

SIOM

SIOM

SIOM

SIOM

Mellanox® ConnectX-3 Pro
Intel® i350

Mellanox® ConnectX-3 Pro
Intel® i350

Mellanox® ConnectX-4 VPI
Intel® i210

Broadcom® BCM57414
Intel® i350

Mellanox® ConnectX-4 Lx EN
Intel® X550-AT2

Intel® OP HFI ASIC
(Wolf River WFR-B)

1 QSFP (56Gb/port)
2 RJ45 (1Gb/port)

2 QSFP (56Gb/port)
2 RJ45 (1Gb/port)

1 QSFP28 (100Gb/port)
1 RJ45 (1Gb/port)

2 SFP28 (25Gb/port)
2 RJ45 (1Gb/port)

2 SFP28 (25Gb/port)
2 RJ45 (10GBase-T)

1 QSFP28 (100Gb/port) 3.622" (92mm) x 3.428" (87.08mm) 15

iv

Dimension

(w/o Brackets) (L x H)

3.622" (92mm) x 3.428" (87.08mm) 9

3.622" (92mm) x 3.428" (87.08mm) 11

3.622" (92mm) x 3.428" (87.08mm) 19

3.622" (92mm) x 3.428" (87.08mm) 9

3.622" (92mm) x 3.428" (87.08mm) 25

Power

(W)

Model Type Form Factor Interface Controller Connection

Model Type Form Factor Interface Controller Connection

Dimension

(w/o Brackets) (L x H)

Power

(W)

AOC-SGP-i2 GbE Standard LP PCI-E x4 Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 3.5

AOC-SGP-i4 GbE Standard LP PCI-E x4 Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 5

AOC-STG-i2T 10GbE Standard LP PCI-E x8 Intel® X540-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 13

AOC-STGS-i1T 10GbE Standard LP PCI-E x4 Intel® X550-AT 1 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 9

AOC-STGS-i2T 10GbE Standard LP PCI-E x4 Intel® X550-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 11

AOC-STG-b2T 10GbE Standard LP PCI-E x8 Broadcom® BCM57416 2 RJ45 (10GBase-T) 5.6” (142m m) x 2.73”(69mm) 13.1

AOC-STG-i4T 10GbE Standard LP PCI-E x8 Intel® XL710-BM1 4 RJ45 (10GBase-T) 5.9” (149mm ) x 2.73”(69mm) 15.5

AOC-STGN-i1S 10GbE Standard LP PCI-E x8 Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 10

AOC-STGN-i2S 10GbE Standard LP PCI-E x8 Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 11.2

AOC-STGF-i2S 10GbE Standard LP PCI-E x8 Intel® X710-BM2 2 SFP+ (10Gb/port) 5.19” (132mm) x 2.73” (69mm) 5.6

AOC-STG-b4S 10GbE Standard LP PCI-E x8 Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (137mm ) x 2.73” (69mm) 14

AOC-STG-i4S 10GbE Standard LP PCI-E x8 Intel® XL710-BM1 4 SFP+ (10Gb/port) 5.9” (150mm) x 2.73” (69mm) 8

AOC-S25G-m2S 25GbE Standard LP PCI-E x8 Mellanox® CX-4 LX 2 SFP28 (25Gb/port) 5.6" (142mm) x 2.713“ (69mm) 8.7

AOC-S25G-b2S 25GbE Standard LP PCI-E x8 Broadcom® BCM57414 2 SFP28 (25Gb/port) 5.6" (142mm) x 2.713“ (69mm) 5. 2

AOC-S25G-i2S 25GbE Standard LP PCI-E x8 Intel® XXV710 2 SFP28 (25Gb/port) 6.1" (155mm) x 2.713“ (69mm) 7.2

AOC-S40G-i1Q 40GbE Standard LP PCI-E x8 Intel® XL710-BM1 1 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 6.5

AOC-S40G-i2Q 40GbE Standard LP PCI-E x8 Intel® XL710-BM2 2 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 7

AOC-S100G-m2C 100GbE Standard LP PCI-E x16 Mellanox®CX-4 E N 2 QSFP28 (100Gb/port) 6.6” (168mm) x 2.73” (69mm) 16.3

AOC-S100G-b1C 100GbE Standard LP PCI-E x16 Broadcom® BCM57454 2 QSFP28 (100Gb/port) 6.6” (168mm) x 2.73” (69mm) 17.8

AOC-CGP-i2 GbE MicroLP PCI-E x4 Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.54” (39mm) 4

AOC-CTG-i1S 10GbE MicroLP PCI-E x8 Intel® 82599EN 1 SFP+ (10Gb/por t) 4.85" (123mm) x 1.54" (39mm) 10

AOC-CTG-i2S 10GbE MicroLP PCI-E x8 Intel® 82599ES 2 S FP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 11

AOC-CTG-i2T 10GbE MicroLP PCI-E x8 Intel® X 540-AT2 2 RJ45 (10GBase-T) 4.8” (123mm) x 2.75” (77mm) 13

AOC-CTGS-i2T 10GbE MicroLP P CI-E x4 Intel® X550-AT2 2 RJ45 (10GBase-T) 4.45” (113mm) x 1.54” (39mm) 12

AOC-C25G-m1S 25GbE MicroLP PCI-E x8 Mellanox® CX-4 Lx EN 1 SFP28 (28Gb/port) 4.45” (113mm) x 1.54” (39mm) 8.5

Dimension

(w/o Brackets) (L x H)

Power

(W)

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: [phone]

Fax: [phone]

Email: [e-mail] (General Information)

[e-mail] (Technical Support)

[e-mail] (Customer Support)

Website: www.supermicro.nl

Preface

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: [phone]

Fax: [phone]

Email: [e-mail]

Website: www.supermicro.com.tw

v

AOC-CTGS-i2T Add-on Card User's Guide

Table of Contents

Preface

About this User's Guide ................................................................................................ 3

About this Add-on Card ................................................................................................. 3

An Important Note to the User ...................................................................................... 3

Returning Merchandise for Service ............................................................................... 3

Naming Convention ....................................................................................................... 4

SMC Networking Add-on Cards .................................................................................... 4

Conventions Used in the User's Guide ......................................................................... 4

Contacting Supermicro .................................................................................................. 6

Chapter 1 Overview

1-1 Overview ......................................................................................................... 1-1

1-2 Product Highlights ........................................................................................... 1-1

1-3 Technical Specications .................................................................................. 1-2

1-4 Compliance/Operating Environment ............................................................... 1-5

Chapter 2 Hardware Components

2-1 Add-On Card Image and Layout ..................................................................... 2-1

2-2 Major Components .......................................................................................... 2-1

2-3 Jumpers and Indicators ................................................................................... 2-2

2-4 LED Indicators ................................................................................................. 2-3

Chapter 3 Installation

3-1 Static-Sensitive Devices .................................................................................. 3-1

3-2 Before Installation ........................................................................................... 3-2

3-3 Installing the Add-on Card .............................................................................. 3-2

3-4 Installing Drivers on Windows ......................................................................... 3-3

3-5 Installing Drivers on Linux ............................................................................... 3-3

3-6 Installing Drivers on FreeBSD ........................................................................ 3-5

vi

Chapter 1: Overview

Chapter 1

Overview

1-1 Overview

Congratulations on purchasing your add-on card from an acknowledged leader in

the industry. Supermicro products are designed with the utmost attention to detail

to provide you with the highest standards in quality and performance. For product

support and updates, please refer to our website at http://www.supermicro.com/

products/nfo/networking.cfm#adapter.

1-2 Product Highlights

• Dual RJ45 Connectors

• MicroLP Form Factor

• PCI Express 3.0 x4 (8GT/s)

• Network Virtualization O󰀪oads: VXLAN and NVGRE

• VMDq and SR-IOV for Virtualized Environment

• Ethernet Flow Director

• Jumbo Frame Support up to 9KB

• IEEE 802.3az Energy E󰀩cient Ethernet (EEE)

• DMA coalescing

• Supports RJ-45 Category-6 and 6A (10GBASE-T)

• RoHS compliant 6/6

1-1