Sunrise Medical J-Gel User Manual
Jay®J-Gel Cushion
Instruction Guide
Jay®Almohadon J-Gel
Instrucciones Para el Uso
PRECAUCIÓN – Instalación de un almohadón en una silla de ruedas. (Tomado del 1er.
Párrafo del Manual del cliente).
Jay®Coussin J-Gel
Instructions pour l’utilisation
ATTENTION– Placer un cousin sur un fauteuil roulant
Jay®Cuscino J-Gel
Istruzioni per l’uso
ATTENZIONE– Come montare il cuscino su una carrozzina
XT4205 Rev. A
English Instructions
3
CAUTION
Installing a cushion on a wheelchair may affect the center of gravity of the wheelchair and may
cause the wheelchair to tip backwards, potentially resulting in injury. Always assess for the
potential need for anti-tippers or amputee axle adapter brackets to be added to the wheelchair to
help increase stability.
The J-Gel cushion is designed to provide sitting comfort and postural support as well as to help
reduce the incidence of skin breakdown. However, no cushion can completely eliminate sitting
pressure or prevent skin breakdown. The J-Gel cushion is not a substitute for good skin care
including: proper diet, cleanliness and regular weight shifts/ pressure reliefs. In addition, prior to
prolonged sitting, any cushion should be tried for a few hours at a time while a clinician inspects
your skin to ensure that red pressure spots are not developing.
Users should ensure their skin is inspected daily for signs of skin breakdown. The clinical indicator
for tissue breakdown is skin redness. If your skin develops redness, discontinue the use of the
cushion immediately and consult your doctor or therapist. If you require a higher pressure-relieving
product for skin protection, ask your Sunrise Medical– Jay supplier for a free demonstration of any
of the other Jay cushion products.
Do not leave the cushion outside overnight at temperatures below 40°F (5°C). Allow the cushion
to warm to room temperature before using. Sitting on extremely cold or hot surfaces can cause
skin damage.
Avoid exposure to direct sunlight.
Avoid contact with any sharp objects or pointed edges that may tear or puncture the gel.
The J-Gel Cushion is free of natural rubber latex.
NOTE– To ensure the proper use of your cushion, please read these instructions and keep them for
future reference.
FITTING A J-GEL CUSHION
A cushion should ideally be fitted to you by a health care professional. Place the cushion to the
back of the chair with the material identification tags to the back, the contoured side facing up
and the “bump” towards the front. The product label should be visible on the right side of the
cushion. Adjust the footplates so your legs rest comfortably on the cushion. Lowering the
footrests on your wheelchair may help to reduce the pressure on your ischial tuberosities (seat
bones) and on your coccyx (tailbone).
NOTE– Proper foot adjustment may enhance sitting comfort. Also, avoid using the cushion on
overly stretched seat upholstery. Replace stretched seat upholstery or purchase a Jay Solid
seat insert for your cushion. Avoid using overly stretched backrest upholstery. Stretched
upholstery does not provide adequate support for the body and improper positioning may
result. Replace stretched backrest upholstery or purchase a back support product from
Sunrise that is appropriate for you. Contact a Sunrise Medical– Jay supplier for a free
demonstration of these products.
Table of Contents
XT4205 Rev. A
2
English Instructions .......................................................... 2
Español ........................................................................... 5
Français........................................................................... 8
Italiano........................................................................... 11
XT4205 Rev. A
English Instructions
5
LIMITED WARRANTY
Sunrise Medical guarantees its products to be free from defects in materials and workmanship for
a specific period of time from the date of purchase.
• The J-Gel Cushion is guaranteed for 2 years from date of purchase.
Sunrise Medical will, at its option, repair or replace your cushion without charge. The warranty
does not apply to punctures, tears or burns, or to the cushion cover.
Claims and repairs should be processed through the nearest authorized Sunrise Medical– Jay
equipment supplier. Except for express warranties made herein, all other warranties including
implied warranties of merchantability and warranties of fitness for a particular purpose are excluded. There are no warranties which extend beyond the description on the face hereof. Remedies for
breach of express warranties herein are limited to repair or replacement of the goods. In no event
shall damages for breach of any warranty include any consequential damages or exceed the cost
of non-conforming goods sold.
Maximum user weight:350 lbs (158 kg)
English Instructions
XT4205 Rev. A
4
EASY MAINTENANCE
Monthly cleaning and regular maintenance may help extend the life of your cushion. During
cleaning, component inspection is recommended. Check the covers for tears and excessive wear.
To Clean Cover
Remove the cover from the base. Turn the cover inside out and machine wash in warm water and
drip or tumble dry on low heat. No ironing is required.
NOTE– Do not dry clean covers or use industrial washers and dryers to clean the cover. Do not
steam autoclave. Do not bleach.
After washing, fit cover back over cushion base and gel pad. Ensure the back of the cover matches up to the back of the foam base and gel pad assembly.
NOTE– If utilized in an institutional setting, write the resident’s name with a permanent marker
on the content label of the covers. This will help to ensure the return of the covers after
washing.
Use only Jay-designed covers in conjunction with the J-Gel Cushion.
To Clean Foam Base
Remove the cover and gel pad from the foam base. Wipe with warm water and soap. Wipe off
with a clean cloth.
NOTE– Avoid submersion of the foam base in water.
Reinstall the gel pad, then fit cover back over foam base. Ensure the back of the cover matches
up to the back of the foam base and gel pad assembly.
To Clean Gel Pad Overlay
Remove the cover and gel pad from the foam base. Recommend use of a 1:10 solution of bleach
and water to clean the gel cube pad surfaces. You may also use any conventional hospital
approved topical equipment cleaners and disinfectants that do not contain alcohol. (Never clean
any surfaces of cushion with alcohol). Wipe off with a clean cloth. The gel overlay may also be
cleaned with warm water and soap. Autoclaving and gas sterilization are not recommended.
Always thoroughly rinse gel pad with clear water before placing back into service. This helps
eliminate the possibility of skin irritation due to cleaning solution residue.
Reassembling the J-Gel Cushion After Cleaning
Make sure cover, foam base and gel pad overlay are completely dry before reassembling. Orient
the front and back of each component per the labels on each, then attach the gel pad overlay
using the Velcro® strips as location indicators. The gel pad should fit symmetrically over the foam
base. Lastly, replace cover over entire assembly. Ensure the back of the cover matches up to the
back of the cushion/gel assembly.
Repairs
Manufacturer offers a repair kit with instructions for the Gel cube pad.
Loading...