QUICKFIT DELUXE SLING
FITTING INSTRUCTIONS
TECHNICAL SPECIFICATIONS
WASHING INSTRUCTIONS
USER GUIDE FOR THE QUICKFIT DELUXE SLING
The Quickfit Deluxe Sling is a development of the Quickfit design to suit 95% of clients.
It provides a more comfortable and more supportive lift without the need for side
suspenders. It is available with padding and padding plus head support and it is
available in five sizes - extra large, large, medium, small and paediatric.
ADDITIONAL SLINGS ARE AVAILABLE TO SUIT INDIVIDUAL NEEDS.
YOU ARE ADVISED THAT YOU SHOULD ALWAYS SEEK THE ADVICE OF AN
WE WILL BE PLEASED TO ADVISE YOU AS TO YOUR NEAREST AUTHORISED DEALER.
Part no. 374-90010
Rev A
AUTHORISED DEALER BEFORE PURCHASING.
ENGLISH
HOW TO FIT FROM SEATED POSITION
Make sure the hand grips and seams are on the
outside of the sling. Feed the sling down the back
of the patient, leaving the commode aperture at
the base of the spine. Check the sling is square
across the shoulders.
Pass strap C up through strap B then repeat for
other leg using strap D through strap A.
Bring the longest leg piece stiffener forward so
that it is parallel with the long bone of the thigh.
Ensuring that the leg piece is not twisted, take
the shortest leg piece stiffener under and up
between the legs. Repeat this procedure for the
other leg. Cross strap A through strap B.
Check the sling is smooth under the pateient and
the position is comfortable. Move the hoist into
position and attach the leg straps to the spreader
bar using the coloured loops. This maintains the
patient in an upright sitting position. The lift may
move towards the patient as you do this. When
reseating the patient the hand grips may be used
to ensure a good posture.
Part no. 374-90010
Rev A