intellectual propertylaws. Exceptas expressly permittedin yourlicense agreement orallowed bylaw, youmay notuse, copy, reproduce, translate,
broadcast, modify, license,transmit, distribute,exhibit, perform,publish, ordisplay anypart, inany form,or byany means.Reverse engineering,
disassembly, or decompilation of this software, unlessrequired by law for interoperability, is prohibited.
The informationcontained hereinis subjectto changewithout noticeand isnot warranted to be error-free.If youfind anyerrors, please report them to us
in writing.
If thisis softwareor related software documentationthat isdelivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the
following noticeis applicable:
U.S. GOVERNMENTEND USERS.Oracle programs,including anyoperating system,integrated software, any programsinstalled onthe hardware,
and/or documentation,delivered toU.S. Governmentend usersare "commercial computer software" pursuantto theapplicable FederalAcquisition
Regulation andagency-specific supplementalregulations. Assuch, use,duplication, disclosure, modification, and adaptation of the programs,including
any operatingsystem, integratedsoftware, anyprograms installed on the hardware,and/or documentation,shall besubject tolicense termsand license
restrictions applicableto theprograms. No other rights are granted to the U.S. Government.
This software orhardware is developed for generaluse ina variety of information management applications. It is notdeveloped orintended foruse in any
inherently dangerous applications,including applicationsthat maycreate a risk of personal injury.If youuse thissoftware or hardwarein dangerous
applications, thenyou shallbe responsibleto takeall appropriate fail-safe, backup, redundancy, and other measures toensure its safe use. Oracle
Corporation andits affiliatesdisclaim anyliability forany damagescaused byuse of this software or hardware indangerous applications.
Oracle andJava areregistered trademarks of Oracle and/or its affiliates.Other namesmay betrademarks oftheir respective owners.
Intel andIntel Xeonare trademarksor registered trademarks of Intel Corporation. All SPARC trademarks are used under license and aretrademarks or
registered trademarks of SPARCInternational, Inc. AMD, Opteron, theAMD logo,and theAMD Opteron logo are trademarksor registered trademarksof
Advanced MicroDevices. UNIXis aregistered trademark of The Open Group.
This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle
Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and
services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party
content, products, or services.
restrictions d’utilisationet dedivulgation. Saufdisposition devotre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire,
diffuser, modifier, breveter, transmettre, distribuer, exposer, exécuter, publier ou afficher le logiciel, même partiellement, sous quelque forme et par
quelque procédéque cesoit. Parailleurs, ilest interdit de procéder à toute ingénierie inversedu logiciel,de ledésassembler oude ledécompiler,excepté à
des finsd’interopérabilité avecdes logicielstiers outel queprescrit par la loi.
Les informationsfournies dansce documentsont susceptiblesde modificationsans préavis.Par ailleurs,Oracle Corporationne garantitpas qu’elles
soient exemptesd’erreurs etvous invite,le caséchéant, àlui enfaire part par écrit.
U.S. GOVERNMENTEND USERS.Oracle programs,including anyoperating system,integrated software, any programsinstalled onthe hardware,
and/or documentation,delivered toU.S. Governmentend usersare "commercial computer software" pursuantto theapplicable FederalAcquisition
Regulation andagency-specific supplementalregulations. Assuch, use,duplication, disclosure, modification, and adaptation of the programs,including
any operatingsystem, integratedsoftware, anyprograms installed on the hardware,and/or documentation,shall besubject tolicense termsand license
restrictions applicableto theprograms. No other rights are granted to the U.S. Government.
Ce logicielou matériela étédéveloppé pourun usagegénéral dansle cadre d’applications de gestion des informations. Ce logicielou matérieln’est pas
conçu nin’est destinéà êtreutilisé dansdes applicationsà risque,notamment dans des applications pouvant causer des dommages corporels. Si vous
utilisez celogiciel oumatériel dansle cadred’applications dangereuses, il est de votreresponsabilité deprendre toutes les mesures desecours, de
sauvegarde, deredondance et autres mesures nécessaires àson utilisationdans desconditions optimalesde sécurité.Oracle Corporationet sesaffiliés
déclinent touteresponsabilité quantaux dommagescausés parl’utilisation dece logicielou matériel pour ce type d’applications.
Oracle etJava sontdes marquesdéposées d’OracleCorporation et/oude sesaffiliés.Tout autre nom mentionné peut correspondreà desmarques
appartenant àd’autres propriétaires qu’Oracle.
Intel etIntel Xeonsont desmarques oudes marques déposées d’Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des
marques oudes marques déposéesde SPARC International, Inc. AMD, Opteron, lelogo AMDet lelogo AMDOpteron sont des marques ou des marques
déposées d’AdvancedMicro Devices.UNIX estune marque déposée d’The Open Group.
Ce logicielou matérielet ladocumentation quil’accompagne peuventfournir desinformations oudes liensdonnant accèsà descontenus, desproduits et
des servicesémanant detiers. OracleCorporation etses affiliésdéclinent toute responsabilité ou garantie expresse quant aux contenus,produits ou
services émanantde tiers.En aucuncas, OracleCorporation etses affiliésne sauraient être tenus pour responsables des pertes subies, des coûts
occasionnés oudes dommagescausés parl’accès àdes contenus,produits ou services tiers, ou à leur utilisation.
Please
Recycle
Contents
Using This Documentationvii
About Microsoft Windows Server Operating System Installs1
Windows OS Installation Task Map2
Supported Windows Operating Systems3
SAS PCIe HBAs Requiring LSI Mass Storage Driver for Windows Server 2008
SP23
Selecting the Console Display Option4
Console Display Options4
▼Set Up the Local Console5
▼Set Up the Remote Console6
Selecting the Boot Media Option6
Boot Media Options Requirements7
Local Boot Media Requirements7
Remote Boot Media Requirements7
▼Set Up the Local Boot Media Option7
▼Set Up the Remote Boot Media Option8
Selecting the Installation Target Option9
Installation Target Options9
▼Set Up a Local Storage Drive (HDD or SSD) as the Installation Target
9
▼Set Up a Fibre Channel Storage Area Network Device as the
Installation Target9
iii
Windows OS Installation Options10
Single-Server Installation Methods11
Guided OS Installation11
Manual OS Installation12
Windows Deployment Services OS Installation12
Using Oracle System Assistant12
Oracle System Assistant Overview12
Oracle System Assistant Tasks13
Oracle System Assistant Install OS Task14
Obtaining Oracle System Assistant14
Preparing to Install the Operating System17
Setting Up BIOS17
▼Verify the BIOS Factory Defaults18
▼Switch Between Legacy BIOS and UEFI BIOS Mode20
Configuring RAID22
Installing Windows Server Operating System23
Before You Begin23
Installing Windows Server on a Single System Using Oracle System
Assistant24
▼Install Windows Server Using Oracle System Assistant25
Installing Windows Server on a Single System Using Media27
▼Install Windows Server 2008 (SP2 or R2 SP1) Using Local or Remote
Media28
▼Install Windows Server 2012 (R2) Using Local or Remote Media38
▼Install Windows Server 2008 (SP2 or R2 SP1) or Windows Server 2012
(R2) Using PXE Network Boot52
Post Installation Tasks for Windows Server57
Supplemental Software Component Options57
ivSun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Installing Device Drivers and Supplemental Software58
▼Install Server-Specific Device Drivers and Supplemental Software59
Configuring Intel NIC Teaming60
Getting Server Firmware and Software61
Firmware and Software Updates61
Firmware and Software Access Options62
Software Releases63
Getting Firmware and Software from MOS or PMR64
▼Download Firmware and Software Using My Oracle Support64
Requesting Physical Media65
Gathering Information for the Physical Media Request65
▼Request Physical Media (Online)66
▼Request Physical Media (By Phone)67
Installing Updates Using Other Methods68
Index69
Contentsv
viSun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Using This Documentation
This installation guide contains procedures for installing the Microsoft Windows
operating system, and initial software configuration procedures for bringing the Sun
Server X3-2L from Oracle to a configurable and usable state.
Note – The Sun Server X3-2L was formerly named the Sun Fire X4270 M3 server.
This former name might still appear in the software. The new product name does not
indicate any change in system features or functionality.
This document is written for technicians, system administrators, authorized service
providers (ASPs), and users who have experience with installing operating systems.
This section describes how to get the latest software and firmware, documentation
and feedback, and support and accessibility information.
■ “Getting the Latest Software and Firmware” on page vii
■ “About This Documentation” on page viii
■ “Related Documentation” on page viii
■ “Feedback” on page viii
■ “Access to Oracle Support” on page ix
Getting the Latest Software and
Firmware
Firmware, drivers and other hardware-related software for each Oracle x86 server,
server module (blade), and blade chassis are updated periodically.
You can obtain the latest version in one of three ways:
vii
■ Oracle System Assistant – This is a new factory-installed option for Oracle x86
servers. It has all the tools and drivers you need and is built into the server.
■ My Oracle Support: http://support.oracle.com
■ Physical media request
For more information, see “Getting Server Firmware and Software” on page 61.
About This Documentation
This documentation set is available in both PDF and HTML formats. The information
is presented in topic-based organization (similar to online help) and therefore does
not include chapters, appendices, or section numbering.
A PDF version that includes all information on a particular subject (such as hardware
installation or product notes) can be generated by clicking the PDF button in the
upper left corner of the HTML page.
Related Documentation
DocumentationLink
All Oracle documentationhttp://www.oracle.com/documentation
Sun Server X3-2Lhttp://www.oracle.com/pls/topic/lookup?ctx=
You can provide feedback on this documentation at:
viiiSun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
http://www.oracle.com/goto/docfeedback
Access to Oracle Support
Oracle customers have access to electronic support through My Oracle Support. For
information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=
info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs
if you are hearing impaired.
Using This Documentationix
xSun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
About Microsoft Windows Server
Operating System Installs
Note – The Sun Server X3-2L was formerly named the Sun Fire X4270 M3 server.
This former name might still appear in the software. The name change does not
indicate any change in system features or functionality.
This section contains an overview for installing a new Microsoft Windows Server
2008 or Windows Server 2012 operating system (OS) on your server.
DescriptionLinks
Learn about Windows operating system
installation steps.
Learn about the supported Windows
operating systems.
Learn about storage driver requirements
for SAS HBAs.
Learn about console display options and
how to set them up.
Learn about boot media options and how
to set them up.
Learn about installation target options and
how to set them up.
Learn about OS installation options.“Windows OS Installation Options” on
Learn about Oracle System Assistant.“Using Oracle System Assistant” on page 12
“Windows OS Installation Task Map” on
page 2
“Supported Windows Operating Systems” on
page 3
“SAS PCIe HBAs Requiring LSI Mass Storage
Driver for Windows Server 2008 SP2” on
page 3
“Selecting the Console Display Option” on
page 4
“Selecting the Boot Media Option” on page 6
“Selecting the Installation Target Option” on
page 9
page 10
Related Information
■ “Installing Windows Server Operating System” on page 23
1
Windows OS Installation Task Map
The following table lists and describes the steps for installing the Windows Server
operating system.
Step DescriptionLinks
1.Install your server hardware and configure the Oracle
ILOM service processor.
2.Obtain the Windows installation media.Go to:
3.Review the product notes.Sun Server X3-2L Product Notes
4.Set up the console, the boot media, and the installation
target that you will use to perform the installation.
5.Verify and, if necessary, configure BIOS.“Setting Up BIOS” on page 17
6.Install the Windows OS.• “Installing Windows Server Operating
7.Perform the post installation tasks, if applicable.“Post Installation Tasks for Windows Server”
Related Information
■ “Preparing to Install the Operating System” on page 17
2Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
System” on page 23
on page 57
Supported Windows Operating Systems
The server supports the following Microsoft Windows operating systems:
Windows OSEdition
• Windows Server 2008 SP2• Standard Edition (64-bit)
• Enterprise Edition (64-bit)
• Datacenter edition (64-bit)
• Windows Server 2008 R2 SP1• Standard Edition (64-bit)
• Enterprise Edition (64-bit)
• Datacenter edition (64-bit)
• Windows Server 2012• Standard Edition (64-bit)
• Datacenter Edition (64-bit)
• Windows Server 2012 R2• Standard Edition (64-bit)
• Datacenter Edition (64-bit)
Additionally, you can install any other supported operating system or virtual
machine software on your server. For a complete list of operating systems supported
by the server, refer to the Sun Server X3-2L Product Notes at:
■ “Installing Windows Server Operating System” on page 23
SAS PCIe HBAs Requiring LSI Mass
Storage Driver for Windows Server 2008
SP2
The following table identifies the SAS PCIe host bus adapter (HBA) options that are
supported on the server at the time of this publication. If you have one of these SAS
PCIe HBA options configured on your server and you are installing Windows Server
About Microsoft Windows Server Operating System Installs3
2008 SP2, you will need to load the LSI mass storage driver for the PCIe HBA option.
This LSI mass storage driver is available on the internal Oracle System Assistant USB
flash drive and Oracle System Assistant provides tools for loading it.
TABLE: Supported SAS PCIe HBAs Requiring LSI Mass Storage Driver
Supported SAS PCIe HBAsOption NumberDriver Required During Installation
Sun Storage 6 Gb/s SAS PCIe
RAID HBA, Internal
Sun Storage 6 Gb/s SAS PCIe
RAID HBA, External
Sun Storage 6 Gb/s SAS PCIe
HBA, Internal
Sun Storage 6 Gb/s SAS PCIe
HBA, External
SG-SAS6-R-INT-ZLSI MegaRAID SAS 92xx-xx
SG-SAS6-R-EXT-ZLSI MegaRAID SAS 92xx-xx
SG-SAS6-INT-ZLSI Adapter SAS 2008 Falcon
SG-SAS6-EXT-ZLSI Adapter SAS 2008 Falcon
Instructions for loading the LSI mass storage driver during the Windows Server 2008
SP2 installation are provided in Step 8 of the “Install Windows Server 2008 (SP2 or R2
SP1) Using Local or Remote Media” on page 28.
If your server does not have an internal Oracle System Assistant USB flash drive, you
can download the ISO image that includes the LSI mass storage driver. For download
instructions, see “Getting Server Firmware and Software” on page 61.
Selecting the Console Display Option
This section describes the options for connecting a console to perform the
installation.
■ “Console Display Options” on page 4
■ “Set Up the Local Console” on page 5
■ “Set Up the Remote Console” on page 6
Console Display Options
You can install the OS and administer the server by attaching a local console directly
to the server’s service processor (SP). The server supports two types of local consoles:
■ A terminal connected to the serial management port (SER MGT)
4Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
You can connect the terminal directly to the port or connect it to a terminal
emulator that is connected directly to the port.
■ A VGA monitor connected to the video port (VGA) and a USB keyboard and USB
mouse connected to the two rear USB connectors
You can also install the OS and administer the server from a remote console by
establishing a network connection to the server service processor (SP). There are two
types of remote consoles:
■ Web-based client connection using the Oracle ILOM Remote System Console
application
■ SSH client connection to the network management (NET MGT) port
▼ Set Up the Local Console
1. To connect a local console, do one of the following:
■ Connect a terminal to the serial management port (SER MGT) either directly or
through a terminal emulator.
■ Connect a VGA monitor to the video port (VGA) and a keyboard and mouse to
the USB ports.
2. For serial management port (SER MGT) connections only, to establish a
connection to the host serial port:
a. Press Enter to access Oracle Integrated Lights Out Manager (ILOM).
The Oracle ILOM login prompt appears.
b. Type your Oracle ILOM user name and password.
c. At the Oracle ILOM prompt, type:
-> start /HOST/console
The serial management port output is automatically routed to the Linux host serial
local console.
You can start the operating system installation to a server by booting a local or
remote installation media source. This section identifies the supported media sources
and the setup requirements for each source.
■ “Boot Media Options Requirements” on page 7
■ “Set Up the Local Boot Media Option” on page 7
■ “Set Up the Remote Boot Media Option” on page 8
6Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Boot Media Options Requirements
This section describes the requirements for using local and remote media.
■ “Local Boot Media Requirements” on page 7
■ “Remote Boot Media Requirements” on page 7
Local Boot Media Requirements
Local boot media requires a built-in storage device on the server, or an external
storage device attached to the server.
Supported OS local boot media sources can include:
■ CD/DVD-ROM installation media, and, if applicable, floppy device driver media
Remote Boot Media Requirements
Remote media requires you to boot the install over the network. You can start the
network install from a redirected boot storage device or another networked system
that exports the installation over the network using a Pre-Boot eXecution
Environment (PXE).
Supported OS remote boot media sources can include:
■ CD/DVD-ROM installation media, and, if applicable, floppy device driver media
■ CD/DVD-ROM ISO installation image, and, if applicable, floppy device driver
1. If the server is equipped with an optional DVD drive, insert the Windows
Server OS installation DVD into the DVD drive located on the front of the
server; otherwise, proceed to the next step.
For more information about how to attach local devices to the server, see the Sun
Server X3-2L Installation Guide, “Cabling the Server” on page 61.
2. If your server does not contain a DVD drive, insert a USB flash drive that
contains the Windows Server OS installation media into one of the external
USB ports located on the front and rear of the server.
About Microsoft Windows Server Operating System Installs7
▼ Set Up the Remote Boot Media Option
To install OS from media in a remote location, perform these steps.
1. To redirect the boot media from a remote storage device, perform these steps;
otherwise, go to the next step.
a. Mount or present the OS boot media so that it is accessible, for example
■ For CD/DVD-ROM, insert media into the built-in or external
CD/DVD-ROM drive.
■ For CD/DVD-ROM ISO image, ensure that ISO image(s) are readily
available on a network shared location.
■ For device driver floppy ISO image, ensure that ISO image, if applicable, is
readily available on a network shared location or on a USB drive.
b. Establish a web-based client connection to the server Oracle ILOM SP and
launch the Oracle ILOM Remote System Console application.
For more details, see the setup requirements for web-based client connection in
“Selecting the Console Display Option” on page 4.
c. In the Devices menu of the Oracle ILOM Remote System Console
application, specify the location of the boot media, for example:
■ For CD/DVD-ROM boot media, select CD-ROM.
■ For CD/DVD-ROM ISO image boot media, select CD-ROM Image.
■ For floppy device driver boot media, if applicable, select Floppy.
■ For floppy image device driver boot media, if applicable, select Floppy
Image.
2. To perform the installation using PXE, perform these steps.
a. Configure the network server to export the installation using PXE boot.
b. Make the OS install media available for PXE boot.
If you are using an automated OS installation image, you will need to create
and provide the automated OS install image.
For detailed instructions for automating the installation setup process, consult
the Windows operating system documentation.
c. To boot the installation media, select the PXE boot interface card as the
temporary boot device.
8Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Selecting the Installation Target Option
This section describes how to set up the installation target.
■ “Installation Target Options” on page 9
■ “Set Up a Local Storage Drive (HDD or SSD) as the Installation Target” on page 9
■ “Set Up a Fibre Channel Storage Area Network Device as the Installation Target”
on page 9
Installation Target Options
With the exception of the internal Oracle System Assistant flash drive (which is
reserved for Oracle System Assistant), you can install the operating system on any of
the storage drives installed in the server. These include hard disk drives (HDDs) and
solid state drives (SSDs).
For servers equipped with Fibre Channel PCIe Host Bus Adapters (HBAs), you can
choose to install the operating system to an external FC storage device.
▼ Set Up a Local Storage Drive (HDD or SSD) as
the Installation Target
● Ensure that the HDD or SSD is properly installed and powered on.
For more information about installing and powering on a HDD or SSD, see the
Sun Server X3-2L Service Manual, “Servicing Storage Drives and Rear Drives
(CRU)” on page 45.
▼ Set Up a Fibre Channel Storage Area Network
Device as the Installation Target
1. Ensure that the PCIe host bus adapter (HBA) is properly installed in the server.
For more information about installing a PCIe HBA option, see the Sun Server
X3-2L Service Manual, “Servicing PCIe Cards (CRU)” on page 77.
About Microsoft Windows Server Operating System Installs9
2. Ensure that the storage area network (SAN) is installed and configured to make
the storage device visible to the server’s host.
For instructions, refer to the documentation supplied with the Fibre Channel HBA.
Windows OS Installation Options
You can choose to install an OS on a single server or on multiple servers. The scope
of this document is for single server OS installations. The table below provides some
information about these two installation options.
OptionDescription
Multiple serversYou can use Oracle Enterprise Manager Ops
Center to install an OS on multiple servers.
For information, go to:
Single serverInstall an OS to a single server using one of
the following methods:
• Locally: OS installation is performed
locally at the server. This option is
recommended if you have just completed
the physical installation of the server in the
rack.
• Remotely: OS installation is performed
from a remote location. Uses the Oracle
ILOM Remote System Console application
to access the Oracle System Assistant or to
perform a manual OS installation.
Note - You should use the Oracle System
Assistant for single server OS installations.
For more information about single-server OS installation methods and Oracle System
Assistant, see:
■ “Single-Server Installation Methods” on page 11
■ “Using Oracle System Assistant” on page 12
10Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Single-Server Installation Methods
Select a method for providing the Windows installation media. Use the following
information to determine the local or remote OS installation that best serves your
needs.
Media Delivery MethodAdditional Requirements
Local guided OS installation – Uses
Oracle System Assistant.
(Recommended)
Remote guided OS installation – Uses
Oracle System Assistant.
(Recommended)
Local Using a CD/DVD drive – Uses a
physical CD/DVD drive connected to
the server.
Remote Using a CD/DVD drive or a
CD/DVD ISO image – Uses a
redirected physical CD/DVD drive on
a remote system running the Oracle
ILOM Remote System Console
application.
WDS WIM image – Uses a customized
Windows Imaging Format (WIM)
image on a Windows Deployment
Services (WDS) server.
A monitor, USB keyboard and mouse, a USB
device, and Windows distribution media. For
more information, see “Guided OS Installation”
on page 11.
Oracle ILOM Remote System Console
application, a redirected CD/DVD drive or ISO
image file, and Windows distribution media. For
more information, see “Guided OS Installation”
on page 11.
A monitor, USB keyboard and mouse, a USB
CD/DVD drive, and Windows distribution
media. For more information, see “Manual OS
Installation” on page 12.
A remote system with a browser, an attached
physical CD/DVD drive, Windows distribution
media, and network access to the server’s
management port. For more information, see
“Manual OS Installation” on page 12.
A server running WDS and a WIM image
customized for your server. For more
information, see “Windows Deployment Services
OS Installation” on page 12.
Guided OS Installation
This is the recommended method for installing a supported OS on your server. This
method involves using the Oracle System Assistant application. You deliver the
Windows OS installation media on either a local or remote CD/DVD drive, USB
device, or CD/DVD image, and Oracle System Assistant guides the installation
process and gathers and installs the needed drivers when necessary. Your server
must support Oracle System Assistant, and it must be installed in the server.
About Microsoft Windows Server Operating System Installs11
Manual OS Installation
With this method, you deliver the Windows distribution media on either a local or
remote CD/DVD drive, USB device, or CD/DVD image. You also need to install any
necessary drivers. The drivers for your server are available on the server’s internal
Oracle System Assistant flash drive (if installed) and from the My Oracle Support
web site as either OS-specific and server-specific packages or as an ISO image file. To
install the OS, use the distribution media’s installation wizard.
Windows Deployment Services OS Installation
You can install Windows from a deployment server environment. For the advanced
user, you can create a customized Windows Imaging Format (WIM) iimage for your
server on a system running Windows Deployment Services (WDS). Once this
installation image file has been created, you can boot your server from its network
card and select the image from the WDS system for unattended deployment. For
more information about WDS, go to:
This section provides information about Oracle System Assistant, the tasks you can
perform, and how to obtain Oracle System Assistant.
■ “Oracle System Assistant Overview” on page 12
■ “Oracle System Assistant Tasks” on page 13
■ “Oracle System Assistant Install OS Task” on page 14
■ “Obtaining Oracle System Assistant” on page 14
Oracle System Assistant Overview
Oracle System Assistant is a server system management tool for Oracle x86 servers. It
integrates Oracle’s system management products, the Oracle System Assistant
application, and a selection of related software to provide a suite of tools that allow
for the quick and convenient startup and maintenance of your server.
The components of Oracle System Assistant include:
■ Oracle System Assistant application
12Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
■ Hardware Management Pack
■ User interface access to startup and maintenance provisioning tasks (including
Install OS task)
■ Oracle System Assistant command-line environment
■ Operating system drivers and tools
■ Server-specific firmware
■ Server-related documentation
Oracle System Assistant resides inside the server as an embedded storage device and
is factory configured with a server-specific version of tools and drivers that is
maintained as such through use of online updates.
For more information about Oracle System Assistant, refer to the Sun Server X3-2L
Administration Guide, “Setting Up the Server Using Oracle System Assistant” on
page 35.
Related Information
■ “Oracle System Assistant Install OS Task” on page 14
■ “Obtaining Oracle System Assistant” on page 14
Oracle System Assistant Tasks
The Oracle System Assistant application combines a selected set of the most common
and useful single-server management provisioning tasks.
The following tasks allow for quick and convenient server startup and ongoing
server management:
■ System overview and system inventory information
■ Online update acquisition for all components (including tools, drivers, and
firmware)
■ System firmware (BIOS and Oracle ILOM) and host bus adapter firmware updates
■ RAID, Oracle ILOM, and BIOS configuration
■ Assisted OS installation
■ Network configuration
■ Disable feature and embedded media integrity check
■ Multilingual keyboard
■ Oracle System Assistant shell terminal window allowing use of the runtime
About Microsoft Windows Server Operating System Installs13
■ Oracle System Assistant recovery
Related Information
■ Sun Server X3-2L Administration Guide, “Setting Up the Server Using Oracle System
Assistant” on page 35
Oracle System Assistant Install OS Task
The Oracle System Assistant application’s Install OS task provides a guided
installation of a supported OS. You supply the OS installation media, and Oracle
System Assistant guides you through the installation process. It then fetches the
appropriate drivers based on your server hardware configuration. The Install OS task
is not available for all server supported operating systems.
If you want to use Oracle System Assistant to update the OS drivers and other
firmware components (such as BIOS, Oracle ILOM, HBAs, and expanders, if
applicable), you should perform the updates before you install the OS.
You can access Oracle System Assistant locally, using a local console connection, or
remotely, using the Oracle ILOM Remote Console application.
If you just completed the installation of the server, then using Oracle System
Assistant locally (while physically present at the server) can be a fast and efficient
method of starting up the server. Once the server is operational, you can
conveniently access Oracle System Assistant remotely while still retaining
full-featured functionality.
Related Information
■ “Installing Windows Server on a Single System Using Oracle System Assistant” on
page 24
Obtaining Oracle System Assistant
Since your server supports Oracle System Assistant, the Oracle System Assistant USB
flash drive might be already installed in your server. If it is installed, and you want
to obtain the latest platform software release, then power on or reset the server,
launch Oracle System Assistant and execute the Get Updates task. If Oracle System
Assistant is installed in your server, but it has been corrupted or overwritten, then
download the recovery ISO image from the My Oracle Support web site. For
download instructions, see “Getting Server Firmware and Software” on page 61.
14Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Related Information
■ Sun Server X3-2L Administration Guide, “Setting Up the Server Using Oracle System
Assistant” on page 35
About Microsoft Windows Server Operating System Installs15
16Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Preparing to Install the Operating
System
This section describes how to prepare the server for installing the operating system.
DescriptionLinks
Verify and configure server BIOS settings.“Setting Up BIOS” on page 17
Configure RAID on the server.“Configuring RAID” on page 22
Setting Up BIOS
Before you install the operating system, you should ensure that BIOS settings are
configured to support the type of installation you plan to perform. The following
topics provide specific instructions on how to configure BIOS to support the
installation:
■ “Verify the BIOS Factory Defaults” on page 18
■ “Switch Between Legacy BIOS and UEFI BIOS Mode” on page 20
Related Information
■ “Installing Windows Server on a Single System Using Oracle System Assistant” on
page 24
■ “Installing Windows Server on a Single System Using Media” on page 27
17
▼ Verify the BIOS Factory Defaults
Note – If the server is newly installed and this is the first time that an operating
system has been installed, then BIOS is probably configured to its default settings
and you do not have to perform this task.
In the BIOS Setup Utility, you can set optimal defaults, as well as view and edit BIOS
settings as needed. Any changes you make in the BIOS Setup Utility (through F2) are
permanent until the next time you change them.
In addition to using F2 to view or edit the system’s BIOS settings, you can use F8
during the BIOS start-up to specify a temporary boot device. If you use F8 to set a
temporary boot device, this change is only in effect for the current system boot. The
permanent boot device specified through F2 will be in effect after booting from the
temporary boot device.
Before you begin, ensure that the following requirements are met:
■ The server is equipped with a hard disk drive (HDD) or solid state drive (SDD).
■ The HDD or SDD is properly installed in the server. For instructions, see the Sun
Server X3-2L Service Manual, “Servicing Storage Drives and Rear Drives (CRU)” on
page 45.
■ A console connection is established to the server. For details, see “Selecting the
Console Display Option” on page 4.
1. Reset or power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■ From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI on the server SP, type the following command
from the prompt:
-> reset /System
When prompted, enter y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
The BIOS screen appears.
18Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
2. When prompted in the BIOS screen, press F2 to access the BIOS Setup Utility.
After a few moments, the BIOS Setup Utility appears.
3. To ensure that the factory defaults are set, do the following:
a. Press F9 to automatically load the optimal factory default settings.
A message appears prompting you to continue this operation by selecting OK or
to cancel this operation by selecting CANCEL.
b. In the message, highlight OK then press Enter.
The BIOS Setup Utility screen appears with the cursor highlighting the first
value in the system time field.
4. In the BIOS Setup Utility, do the following to edit the values associated with
the system time or date.
a. Highlight the values you want to change.
Use up or down arrow keys to change between the system time and date
selection.
b. To change the values in the highlighted fields use these keys:
■ PLUS (+) to increment the current value shown
■ MINUS (-) to decrement the current value shown
■ ENTER to move the cursor to the next value field
5. To access the boot settings, select the Boot menu.
The Boot menu appears.
6. In the Boot menu, verify that the UEFI/BIOS Boot Mode is set to the appropriate
value for your installation.
To change the boot mode, use the up and down arrow keys to select the
UEFI/BIOS Boot Mode field and use the + and - keys to toggle between UEFI and
Legacy.
Preparing to Install the Operating System19
7. In the Boot menu, use the down arrow key to select Boot Device Priority,
and then press Enter.
The Boot Device Priority menu appears listing the order of the known bootable
devices. The first device in the list has the highest boot priority.
8. In the Boot Option Priority menu, do the following to edit the first boot device
entry in the list:
a. Use the up and down arrow keys to select the first entry in the list, then press
Enter.
b. In the Options menu, use the up and down arrow keys to select the default
permanent boot device, then press Enter.
Note – You can change the boot order for other devices in the list by repeating Steps
8a and 8b for each device entry you want to change.
The device strings listed on the Boot Device Priority list and Options menu are in
the format of: device type, slot indicator, and product ID string
9. To save changes and exit the BIOS Setup Utility, press F10.
Alternatively, you can save the changes and exit the BIOS Setup Utility by
selecting Save and Reset on the Exit menu. A message appears prompting you
to save changes and exit setup. In the message dialog, select OK, then press Enter.
Note – When using the Oracle ILOM Remote System Console, F10 is trapped by the
local OS. You must use the F10 option listed in the Keyboard drop-down menu that
is available at the top of the remote console application.
▼ Switch Between Legacy BIOS and UEFI BIOS
Mode
The BIOS firmware supports both legacy BIOS and Unified Extensible Firmware
Interface (UEFI). The default setting is legacy BIOS. Because the Windows Server
2008 and 2012 operating systems support both Legacy BIOS and UEFI BIOS, you
have the option of setting BIOS to either Legacy BIOS Boot Mode or UEFI BIOS Boot
Mode before you perform the installation.
Note – After you have installed the operating system, if you decide you want to
switch from Legacy BIOS Boot Mode to UEFI BIOS Boot Mode or vice versa, you
must remove all partitions and reinstall the operating system.
20Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
1. Reset or power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■ From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI on the server SP, type the following command
from the prompt:
-> reset /System
When prompted, enter y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
The BIOS screen appears.
2. When prompted in the BIOS screen, press F2 to access the BIOS Setup Utility.
After a few moments, the BIOS Setup Utility appears.
3. In the BIOS Setup Utility, select Boot from the top menu bar.
The Boot menu screen appears.
Preparing to Install the Operating System21
4. Select the UEFI/BIOS Boot Mode field and use the +/- keys to change the setting
to either UEFI or Legacy BIOS.
5. To save changes and exit BIOS, press the F10 key.
Configuring RAID
If you want to configure the server storage drives in a redundant array of
independent disks (RAID) configuration, configure RAID on your server before you
install a Windows OS. For instructions for configuring RAID, refer to the Sun Server
X3-2L Installation Guide, “Configuring Server Drives for OS Installation” on page 93.
Related Information
■ Sun Server X3-2L Administration Guide, “Configuring RAID” on page 101
22Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Installing Windows Server
Operating System
This section provides instructions for installing the Microsoft Windows Server 2008
(SP2 and R2 SP1) and Windows Server 2012 (R2) operating systems.
DescriptionLinks
Before you begin the OS install.“Before You Begin” on page 23
Using Oracle System Assistant to install
the Windows operating system.
Using media to install the Windows
operating system.
“Installing Windows Server on a Single
System Using Oracle System Assistant” on
page 24
“Installing Windows Server on a Single
System Using Media” on page 27
Before You Begin
Ensure that the following requirements are met:
■ If you want to configure RAID (redundant array of independent disks) on the
server’s storage drives, you must do so before you install the operating system.
For instructions for configuring RAID, see the Sun Server X3-2L Installation Guide,
“Configuring Server Drives for OS Installation” on page 93.
Note – If the server is equipped with the Sun Storage 6 Gb SAS PCIe RAID, Internal
HBA (SGX-SAS6-R-INT-Z), you must create RAID volume and make it bootable
before installing the operating system; otherwise, the HBA will not be able to identify
the server ’s storage drives.
■ Verify that the BIOS settings are set to the defaults. For instructions on how to
verify and, if necessary, set the BIOS settings, see “Verify the BIOS Factory
Defaults” on page 18.
23
■ Ensure that BIOS is configured for the desired mode: Legacy BIOS or UEFI BIOS.
For instructions on how to set the BIOS mode, see “Switch Between Legacy BIOS
and UEFI BIOS Mode” on page 20
■ The console display option should have been selected and set up prior to
performing the installation. For more information about this option and setup
instructions, see “Selecting the Console Display Option” on page 4.
■ The boot media option should have been selected and set up prior to performing
the installation. For more information about this option and setup instructions, see
“Selecting the Boot Media Option” on page 6.
■ The installation target option should have been selected and set up prior to
performing the installation. For more information about this option and setup
instructions, see “Selecting the Installation Target Option” on page 9.
■ For local installation, insert the Windows installation media into the attached
physical CD/DVD-ROM drive.
■ For remote installation, insert the Windows installation media into the Oracle
ILOM Remote System Console system’s CD/DVD-ROM drive. Ensure that you
have selected CD-ROM from the Oracle ILOM Remote System Console system’s
Devices menu.
■ For a Windows image installation, ensure that the Windows ISO image is
accessible from the Oracle ILOM Remote System Console system. Ensure that you
have selected CD-ROM Image from the Oracle ILOM Remote System Console
system’s Devices menu.
■ Gather the Microsoft Windows Server 2008 (SP2 or R2 SP1) operating system
documentation so that you can use it in conjunction with the Windows Server
operating system instructions provided in this section. You can obtain a copy of
Microsoft Windows Server 2008 installation documentation at:
Installing Windows Server on a Single
System Using Oracle System Assistant
The Oracle System Assistant application’s Install OS task is the recommended
method for installing a supported Microsoft Windows Server OS on the server.
■ “Install Windows Server Using Oracle System Assistant” on page 25
24Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
▼ Install Windows Server Using Oracle System
Assistant
Before you begin the OS installation, ensure that the following prerequisites are met:
■ You have performed the steps in “Preparing to Install the Operating System” on
page 17.
■ If you want to configure the boot drive (that is, the storage drive onto which you
are installing the Windows Server OS) for RAID, you must do so before you install
the OS. For instructions on how to configure RAID on your server, see the Sun
Server X3-2L Installation Guide, “Configuring Server Drives for OS Installation” on
page 93.
1. Ensure that the installation media is available to boot.
■ For Distribution CD/DVD. Insert the Windows Server Distribution media (CD
labeled number 1 or the single DVD) into the local or remote USB
CD/DVD-ROM drive.
■ For ISO image. Ensure that the ISO images are available and that the Oracle
ILOM Remote System Console application is aware of the first ISO image
location.
For additional information about how to set up the installation media, see
“Selecting the Boot Media Option” on page 6.
2. To launch Oracle System Assistant directly from the Oracle ILOM web interface
(recommended), perform the following steps; otherwise proceed to Step 3.
a. In the Actions Panel on the Oracle ILOM web interface Summary page, click
the Oracle System Assistant Launch button.
Oracle System Assistant is launched, and the Overview screen appears.
Installing Windows Server Operating System25
b. Proceed to Step 4.
3. To launch Oracle System Assistant using the Oracle ILOM Remote System
Console and BIOS, perform the following steps:
a. From the Oracle ILOM web interface Summary page, click the Remote
Console Launch button.
The Oracle ILOM Remote Console screen appears.
b. Reset or power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on
the front panel of the server to power off the server, and then press the
Power button again to power on the server.
■ From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI, type: reset /System
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
c. Press the F9 key.
Oracle System Assistant is launched, and the Overview screen appears.
4. To update to the latest software release package, click the Get Updates button in
Oracle System Assistant.
This action ensures that the latest software release package is installed before you
begin the OS installation.
Note – Server web access is required to update Oracle System Assistant.
5. To update the server firmware, click the Update Firmware button.
This action ensures that the server has the latest firmware and drivers before you
begin the OS installation.
6. To install the OS, click the Install OS button.
The Install OS screen appears.
7. From the Supported OS drop-down list, select your OS.
26Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
8. In the Select a BIOS mode if applicable portion of the screen, select the BIOS
mode (UEFI or Legacy BIOS) that you want to use for the OS installation.
9. Indicate the location of the installation media in the Select your install media
location section.
This is the location of the OS distribution media. The options are CD/DVD
devices.
Note – Oracle System Assistant does not support Preboot eXecution Environment
(PXE) installs.
10. Click View Installation Options.
The Installation Options dialog appears.
11. In the Installation Options dialog, deselect any items that you do not want to
install.
Note – In the Installation Options dialog, the OS and Drivers options are mandatory
and cannot be deselected.
12. Click the Install OS button at the bottom of the Operating System Installation
screen.
13. Follow the prompts until the installation is finished.
The server boots.
Installing Windows Server on a Single
System Using Media
This section provides instructions for installing the Microsoft Windows (64-bit)
operating system.
■ “Install Windows Server 2008 (SP2 or R2 SP1) Using Local or Remote Media” on
page 28
■ “Install Windows Server 2008 (SP2 or R2 SP1) or Windows Server 2012 (R2) Using
PXE Network Boot” on page 52
Installing Windows Server Operating System27
▼ Install Windows Server 2008 (SP2 or R2 SP1)
Using Local or Remote Media
This procedure describes how to boot the Microsoft Windows Server 2008 (SP2 or R2
SP1) operating system from local or remote media. It assumes that you are booting
the Windows installation media from one of the following sources:
■ Windows Server 2008 SP2 or Windows Server 2008 R2 SP1 CD or DVD
■ Windows Server 2008 SP2 or Windows Server 2008 R2 SP1 ISO image
Note – The Windows Server 2008 (SP 2 or R2 SP1) ISO image can be used for remote
installation or for creating an installation CD or DVD.
Note – If you are booting the installation media from a PXE environment, refer to
“Install Windows Server 2008 (SP2 or R2 SP1) or Windows Server 2012 (R2) Using
PXE Network Boot” on page 52 for instructions.
1. Ensure that the installation media is available to boot.
■ For Distribution CD/DVD. Insert the Windows 2008 Distribution media (CD
labeled number 1 or the single DVD) into the local or remote USB
CD/DVD-ROM drive.
■ For ISO image. Ensure that the ISO images are available and that the Oracle
ILOM Remote System Console application is aware of the ISO image location.
For additional information about how to set up the installation media, see
“Selecting the Boot Media Option” on page 6.
2. Reset or power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■ From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI on the server SP, type: reset /System
The BIOS screen appears.
28Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
3. In the BIOS screen, press F8 to specify a temporary boot device for the Windows
installation.
The Please Select Boot Device menu appears. The screen that appears will be
different depending on whether you have BIOS configured for Legacy mode or
UEFI mode.
■ For legacy BIOS, a screen similar to the following appears:
■ For UEFI BIOS Boot Mode, a screen similar to the following appears:
Installing Windows Server Operating System29
Note – The boot device menu that appears in your installation might differ
depending on the type of disk controller installed in your server.
4. In the Please Select Boot Device menu, select the menu item according to the
Windows media installation method and BIOS mode you elected to use, and
then press Enter.
For example:
■ If you elected to use the Windows local delivery method, select SATA:HDD:P4
DV-W28SS-V from the Legacy BIOS screen or [UEFI]USB2:USB USB CD/DVR
Drive from the UEFI BIOS screen.
■ If you elected to use the Oracle ILOM Remote System Console delivery method,
select USB:VIRTUAL:AMI VIRTUAL CDROM 1.00 from the Legacy BIOS
screen or [UEFI]USB:VIRTUAL:USB USB CD/DVD Drive from the UEFI
BIOS screen.
5. If prompted with Press any key to boot from CD, press any key.
The Windows installation wizard starts.
Continue the Windows installation wizard until the Language Localization dialog
appears.
30Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
6. Select your language and other preferences and click Next to continue.
The Select the Operating System You Want to Install dialog appears.
Installing Windows Server Operating System31
Note – The above dialog varies depending on the type Windows software license:
Educational, Volume, or Retail.
7. In the Select the Operating System You Want to Install dialog, select the
desired operating system and then click Next to continue.
The Installation Type dialog appears.
8. In the Installation Type dialog, click Custom (advanced).
The Where Do You Want to Install Windows dialog appears.
32Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
9. In the Where Do You Want to Install Windows dialog, perform one of the
following tasks:
■ (This task only applies to Windows 2008 SP2 installations) If you do not see
any storage targets listed and have a Sun Storage SAS PCIe RAID HBA option
configured on your server, click Load Driver, and then proceed to Step 10.
-or-
■ If you see the storage target where you want to install the operating system but
want to change the default partition settings associated with that target, select
the target, click Drive Options (advanced), and then proceed to Step 11.
-or-
■ If you see the storage target where you want to install the operating system and
do not want to change the default partition settings for that target, select the
target and click Next, then proceed to Step 12.
10. (Load Driver) In the Load Driver dialog, do the following:
Installing Windows Server Operating System33
a. Ensure that the driver(s) are accessible according to the installation method
chosen (described in “Selecting the Boot Media Option” on page 6).
For example:
■ Storage driver(s) are on a disk mounted as a device from the Oracle ILOM
Remote System Console.
■ Storage driver(s) are on a local physical storage media, such as the Oracle
System Assistant USB flash drive (if installed), which is mounted internally
in the server’s chassis, a CD/DVD, or virtual media mounted from the
Oracle ILOM Remote System Console.
b. In the Load Driver dialog, click Browse to navigate to the appropriate driver
media folder as described below.
■ For systems configured with the Sun Storage 6 Gb SAS PCIe RAID HBA
option (SG-SAS6-R-INT-Z), navigate to the following directory on the
internal Oracle System Assistant USB flash drive to load the appropriate LSI
driver: windows/w2k8/drivers/LSI-HBA-MegaSAS2
■ For a system configured with either of these Sun Storage 6 Gb SAS PCIe
HBA options: SG-SAS6-INT-Z or SG-SAS6-EXT-Z, navigate to the following
directory on the internal Oracle System Assistant USB flash drive to load the
appropriate LSI driver: windows/w2k8/drivers/LSI-HBA-MPT2
34Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
c. In the Browse for Folder dialog, select the appropriate driver, and then click
OK to load the driver.
The selected driver appears in the Select the Driver to Be Installed dialog.
For example:
■ Two example dialogs follow that show the selected driver to be installed for
the two SAS PCIe HBA options. Note that the SAS PCIe HBA drivers are
required only for Windows Server 2008 SP2 installations.
Installing Windows Server Operating System35
d. In the Select the Driver to Be Installed dialog, click Next to install the driver.
The Where Do You Want to Install Windows dialog appears.
36Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Note – If you previously removed or unmounted the Windows Server install media
to load the drivers from the internal Oracle System Assistant USB flash drive, you
might see the following message: Windows Cannot be installed to this disk. If this
message appears, insert or re-mount the Windows install media, then click Refresh.
e. In the Where Do You Want to Install Windows dialog, do one of following:
■ Select the storage target listed and click Next to install the operating system,
and then proceed to Step 12.
-or-
■ If any partitions exist on your target disk, it is recommended that you allow
setup to create the appropriate partitions. To delete pre-existing partitions,
proceed to Step 11.
11. (Partition Drive, advanced) In the lower portion of the Where Do You Want to
Install Windows dialog, do the following:
a. Click Delete to delete the selected storage target existing partition
configuration.
A confirmation window appears.
b. Click OK to confirm the partition deletion.
c. If any additional partitions exist on the target disk, repeat Step a and Step b.
Installing Windows Server Operating System37
d. Click Next to install the operating system to the selected storage target.
12. The Windows installation program begins and will reboot the server multiple
times during the installation process.
13. When the Windows installation is complete, Windows starts and prompts you
to change the user password.
14. In the user password dialog, click OK and set up the initial user login account.
Note – Windows Server 2008 enforces stricter password schemes for user accounts.
Password standards include restrictions on length, complexity, and history. For more
details, click the Accessibility link at the account creation page.
After the initial user account is created, the Windows Server 2008 desktop
appears.
15. Proceed to “Post Installation Tasks for Windows Server” on page 57 to perform
the post installation tasks.
▼ Install Windows Server 2012 (R2) Using Local or
Remote Media
This procedure describes how to boot the Microsoft Windows Server 2012 operating
system from local or remote media. It assumes that you are booting the Windows
installation media from one of the following sources:
■ Windows Server 2012 CD or DVD
■ Windows Server 2012 ISO image
Note – The Windows Server 2012 ISO image can be used for remote installation or
for creating an installation CD or DVD.
Note – If you are booting the installation media from a PXE environment, refer to
“Install Windows Server 2008 (SP2 or R2 SP1) or Windows Server 2012 (R2) Using
PXE Network Boot” on page 52 for instructions.
1. Ensure that the installation media is available to boot.
■ For Distribution CD/DVD. Insert the Windows 2012 Distribution media (CD
labeled number 1 or the single DVD) into the local or remote CD/DVD-ROM
drive.
38Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
■ For ISO image. Ensure that the ISO image is available and that the Oracle
ILOM Remote System Console application is aware of the ISO image location.
For additional information about how to set up the installation media, see
“Selecting the Boot Media Option” on page 6.
2. Reset or power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■ From the Oracle ILOM web interface, click Host Management > Power
Control and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI, type: reset /System
The BIOS screen appears.
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
3. In the BIOS screen, press F8 to specify a temporary boot device for the Windows
installation.
The Please Select Boot Device menu appears. The screen that appears will be
different depending on whether you have BIOS configured for Legacy mode or
UEFI mode.
■ For Legacy BIOS, a screen similar to the following appears:
Installing Windows Server Operating System39
■ For UEFI BIOS, a screen similar to the following appears:
Note – The boot device menu that appears in your installation might differ
depending on the type of disk controller installed in your server.
4. In the Please Select Boot Device menu, select the menu item according to the
Windows media installation method and BIOS mode you elected to use, and
then press Enter.
For example:
■ If you elected to use the Windows local delivery method, select SATA:HDD:P4
DV-W28SS-V from the Legacy BIOS screen or [UEFI]USB2:USB USB CD/DVR
Drive from the UEFI BIOS screen.
40Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
■ If you elected to use the Oracle ILOM Remote System Console delivery method,
select USB:VIRTUAL:AMI VIRTUAL CDROM 1.00 from the Legacy BIOS
screen or [UEFI]USB:VIRTUAL:USB USB CD/DVD Drive from the UEFI
BIOS screen.
5. If prompted with Press any key to boot from CD, press any key.
The Windows installation wizard starts and the Loading files... screen appears.
The Windows installation wizard continues until the Language Localization
dialog appears.
6. Select your language and other preferences, and then click Next to continue.
The Install Now screen appears.
Note – The Install Now screen allows you to continue the installation or access an
optional Repair menu (see lower left of the screen) for troubleshooting.
Installing Windows Server Operating System41
7. Click Install now.
The Setup Is Starting screen appears.
42Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Then the Select Operating System dialog appears.
Installing Windows Server Operating System43
8. In the Select Operating System dialog, select the desired operating system, and
then click Next to continue.
For most installs, select Windows Server 2012 Datacenter (Server with GUI) at the
bottom of the list.
For more information on the different types of Windows operating systems, see
the Windows 2012 documentation at
9. In the License Terms screen, check the I accept the license terms box,
and then click Next to continue.
The Which Type of Installation Do You Want dialog appears.
44Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
10. For all new installations, in the Which Type of Installation Do You Want dialog,
click Custom: Install Windows only (advanced)
The Where Do You Want to Install Windows dialog appears.
Installing Windows Server Operating System45
11. Select (highlight) the disk to which you want to install Windows, and then click
Next.
The Installing Windows screen appears.
46Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
The setup and installation process begins and files are copied to the target.
The Windows Needs to Restart to Continue screen appears.
Installing Windows Server Operating System47
The system reboots.
12. After the system reboots, the Getting Devices Ready screen appears and the
Windows Installation Wizard configures the device settings.
48Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
After the devices are configured, the system reboots again and the Settings screen
appears.
Installing Windows Server Operating System49
13. Enter the Administrator user name and password, and then click Finish.
The Finalizing Your Settings screen appears.
This screen indicates that the Windows operating system has been installed.
50Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
14. After the installation completes, type Ctrl+Alt+Delete to log in.
The Administrator log in screen appears.
Installing Windows Server Operating System51
15. Enter the Administrator password, and then click the arrow to log in.
The Windows Server 2012 desktop appears.
This completes the installation.
16. Proceed to “Post Installation Tasks for Windows Server” on page 57 and perform
the post installation tasks.
▼ Install Windows Server 2008 (SP2 or R2 SP1) or
Windows Server 2012 (R2) Using PXE Network
Boot
This section explains the initial information you will need and provides the
instructions you need to follow to install the Windows Server 2008 (SP2 or R2 SP1) or
Windows 2012 (R2) operating system over an established PXE-based network using a
customer-provided Windows Imaging Format (WIM) image.
Note that the procedure presented in this section documents the initial steps to install
Windows Server over the network using a Windows Deployment Services (WDS).
Specifically, it explains the steps for selecting the server PXE network interface card
that will communicate with your WDS installation server. For further information
about using WDS to install the Windows Server operating system, see Microsoft’s
Windows Deployment Services documentation.
52Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
■ To use PXE to boot the installation media over the network, you must:
■ Configure the network (NFS, FTP, HTTP) server to export the installation tree.
■ Configure the files on the TFTP server that are necessary for PXE booting.
■ Configure the server’s MAC network port address to boot from the PXE
■ To use WDS to perform the installation, you must:
■ Add the required system device drivers to the install.wim image and, if
necessary, the boot.wim image.
For instructions for adding drivers to the WIM installation image(s), see the
Microsoft Windows Deployment Services documentation.
■ Obtain the WIM Administrator password.
1. Ensure that the PXE network environment is properly set up and the Windows
installation media is available for PXE boot.
2. Reset the power on the server.
For example:
■ From the local server, press the Power button (approximately 1 second) on the
front panel of the server to power off the server, and then press the Power
button again to power on the server.
■ From the Oracle ILOM Web interface, select the Host Management > Power
Control, and select Reset from the Select Action list box.
■ From the Oracle ILOM CLI on the server SP, type: reset /System
The BIOS screen appears.
Note – The next events occur very quickly; therefore, focused attention is needed for
the following steps. Watch carefully for these messages as they appear on the screen
for a brief time. You might want to enlarge the size of your screen to eliminate scroll
bars.
3. In the BIOS screen, press F8 to specify a temporary boot device.
The Please Select Boot Device menu appears. The screen that appears will be
different depending on whether you have BIOS configured for Legacy BIOS Boot
Mode or UEFI BIOS Boot Mode.
■ For Legacy BIOS Boot Mode, the following screen appears:
Installing Windows Server Operating System53
■ For UEFI BIOS Boot Mode, the following screen appears:
Note – The boot device menu that appears in your installation might differ
depending on the type of disk controller installed in your server.
54Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
4. In the Boot Device menu, select the network port that is configured to
communicate with your PXE network installation server.
The network bootloader loads and a boot prompt appears. After a few seconds the
installation kernel will begin to load.
5. To complete the installation, do one of the following, depending on which
version of Windows Server you are installing:
■ For Windows Server 2008, refer to Step 5 of “Install Windows Server 2008 (SP2
or R2 SP1) Using Local or Remote Media” on page 28
■ For Windows Server 2012, refer to Step 5 of “Install Windows Server 2012 (R2)
Using Local or Remote Media” on page 38
Installing Windows Server Operating System55
56Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Post Installation Tasks for Windows
Server
Note – The procedures in this section assume that you installed the Microsoft
Windows Server operating system using the manual procedure, that is, you did not
use Oracle System Assistant. If you used Oracle System Assistant to install your
operating system, you can skip this section because Oracle System Assistant
performed these post installation tasks for you.
After completing a manual installation of Windows Server 2008 (SP2 or R2 SP1) or
Windows Server 2012 (R2) and rebooting the server, you should review the following
post installation tasks and, if necessary, perform the tasks that are applicable to your
server.
DescriptionLink
About supplemental software.“Supplemental Software Component Options”
on page 57
Install device drivers and supplemental
software.
Configure NIC teaming.“Configuring Intel NIC Teaming” on page 60
“Installing Device Drivers and Supplemental
Software” on page 58
Supplemental Software Component
Options
Oracle System Assistant makes several Supplemental Software components available
for the server. You have two options for installation:
■ Typical: Installs all Supplemental Software applicable for your server.
■ Custom: Installs only the Supplement Software selected for installation.
57
TABLE: Optional Supplemental Software on page 58 identifies the optional
Supplemental Software components that Oracle System Assistant makes available for
your server.
TABLE:Optional Supplemental Software
Available Supplemental Software
ComponentsDescription
LSI MegaRAID Storage
Manager
Hardware Management PackThe Hardware Management Pack provides tools to help
Intel NIC TeamingEnables the network interfaces on a server to be grouped
Enables you to configure, monitor, and maintain RAID on
the SAS internal RAID host bus adapter (HBA).
you manage and configure your server. It enables you to:
• Use a management agent at the operating system level
to enable in-band monitoring of your server hardware
over Simple Network Management Protocol (SNMP).
You can use this information to integrate your server
into your data center management infrastructure.
• Use a management agent to enable in-band monitoring
of your server’s storage devices, including RAID arrays.
You can view this information from the Oracle
Integrated Lights Out Manager (ILOM) web interface or
command-line interface (CLI).
• Use a BIOS configuration tool, which runs on the host
operating system and configures the host BIOS CMOS
settings, host boot order, and some service processor
(SP) settings.
• Use IPMItool to access the server ’s service processor via
the IPMI protocol and perform management tasks.
together into a team of physical ports called a virtual
interface.
LSI Integrated
RAID Controller
Typical
Not typical
Typical
Installing Device Drivers and
Supplemental Software
The InstallPack application provides an installation wizard for installing
platform-specific device drivers and supplemental software. This application is
included in Oracle System Assistant and is also available for download from the My
Oracle Support web site. For instructions, see “Getting Server Firmware and
Software” on page 61.
58Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
If your server is equipped with Oracle System Assistant and you used it to install the
operating system, then the required platform-specific device drivers and
supplemental software are installed for you. However, if your server is not equipped
with Oracle System Assistant, then you can use InstallPack, which is included in the
OS (operating system) Pack, to install the platform-specific device drivers and
supplemental software. For instructions on obtaining the OS Pack, refer to “Getting
Server Firmware and Software” on page 61.
The following procedure describes how to use InstallPack to install the device drivers
and supplemental software.
■ “Install Server-Specific Device Drivers and Supplemental Software” on page 59
Related Information
■ “Supplemental Software Component Options” on page 57
▼ Install Server-Specific Device Drivers and
Supplemental Software
1. Click on the Install Pack wizard executable: InstallPack.hta.
The Install Pack dialog appears.
2. In the Install Pack dialog, click Next to accept the default installable items.
Post Installation Tasks for Windows Server59
Note – You should always accept the “default installable items” to ensure that the
most recent versions of the drivers are installed.
The Install Pack notice dialog appears.
3. Follow the on-screen prompts to complete the installation of the device drivers
and supplemental software.
Configuring Intel NIC Teaming
For more information on setting up Intel NIC teaming for your environment, refer to
the Intel Connectivity web page on Advanced Networking Services Teaming at:
60Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Getting Server Firmware and
Software
This section explains the options for accessing server firmware and software.
DescriptionLinks
Learn about server firmware and software
updates.
Learn about the options for accessing
firmware and software.
View the available firmware and software
packages.
Access the firmware and software
packages through Oracle System Assistant,
My Oracle Support, or Physical Media
Request.
Install firmware and software updates.“Installing Updates Using Other Methods” on
“Firmware and Software Updates” on page 61
“Firmware and Software Access Options” on
page 62
“Software Releases” on page 63
“Getting Firmware and Software from MOS or
PMR” on page 64
page 68
Firmware and Software Updates
Firmware and software for your server are updated periodically. These updates are
made available as a software release. The software releases are a set of downloadable
files (patches) that includes all available firmware, hardware drivers, tools, and
utilities for the server. All these files have been tested together and verified to work
with your server.
You should update your server firmware and software as soon as possible after a
new software release becomes available. Software releases often include bug fixes,
and updating your server ensures that your server has the latest firmware and
software.
61
The ReadMe document that is included with each patch in a software release
contains information about the patch, such as what has changed or not changed from
the prior software release, as well as bugs that are fixed within the current release.
The product notes that are part of the server documentation identify which server
software release is the latest release supported on your server.
Firmware and Software Access Options
Use one of the following options to obtain the latest set of firmware and software for
your server:
■ Oracle System Assistant – Oracle System Assistant is a new factory-installed
option for Oracle servers that allows you to easily download and install server
firmware and software.
For more information about using Oracle System Assistant, refer to the Sun Server
X3-2L Administration Guide, “Set Up Software and Firmware Using Oracle System
Assistant” on page 30.
■ My Oracle Support – All system firmware and software are available from My
Oracle Support at http://support.oracle.com.
For more information on what is available on the My Oracle Support web site, see
“Software Releases” on page 63.
For instructions on how to download software releases from My Oracle Support,
see “Download Firmware and Software Using My Oracle Support” on page 64.
■ Physical Media Request (PMR) – You can request a DVD that contains any of the
downloads (patches) available from My Oracle Support.
For information see, “Request Physical Media (Online)” on page 66.
■ Other methods – You can use Oracle Enterprise Manager Ops Center, Oracle
Hardware Management Pack, or Oracle ILOM to update your server software and
firmware.
For information, see “Installing Updates Using Other Methods” on page 68
62Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
Software Releases
Software releases on My Oracle Support are grouped by product family (such as Sun
Fire), then the product (the specific server or blade), and finally the software release
version. A software release contains all the updated software or firmware for your
server or blade as a set of downloadable files (patches), including firmware, drivers,
tools, and utilities, all tested together to be compatible with your server.
Each path is a zip file that contains a ReadMe file and a set of subdirectories
containing firmware or software files. The ReadMe file provides details on the
components that have changed since the prior software release and bugs that are
fixed.
My Oracle Support provides the set of software releases for your server as described
in the following table. You can obtain these software releases by downloading the
files from My Oracle Support or by submitting to Oracle a physical media request
(PMR). Alternatively, you can download the firmware and software for your server
using Oracle System Assistant.
Package NameDescriptionWhen to Download This Package
X3-2L (X4270 M3)
SWversion – Firmware Pack
X3-2L (X4270 M3)
SWversion – OS Pack
X3-2L (X4270 M3)
SWversion – All Packs
All the system firmware,
including Oracle ILOM,
BIOS, and option card
firmware.
An OS Pack is available for
each supported operating
system version. Each OS
Pack includes a package of
all tools, drivers, and utilities
for that version of the OS.
Software includes Oracle
Hardware Management Pack
and LSI MegaRAID software.
For the Windows OS, this OS
Pack also includes Intel
Network Teaming and Install
Pack.
Includes the Firmware Pack,
all OS Packs, and all
documents.
This pack does not include
Oracle VTS or the Oracle
System Assistant image.
You need the latest firmware.
You need to update
OS-specific drivers, tools, or
utilities.
You need to update a
combination of system
firmware and OS-specific
software.
Getting Server Firmware and Software63
Package NameDescriptionWhen to Download This Package
X3-2L (X4270 M3)
SWversion – Diagnostics
X3-2L (X4270 M3)
SWversion – Oracle System
Assistant
Oracle VTS diagnostics
image.
Oracle System Assistant
recovery and ISO update
image.
You need the Oracle VTS
diagnostics image.
You need to manually
recover or update Oracle
System Assistant.
Getting Firmware and Software from
MOS or PMR
You can use Oracle System Assistant to easily download and use the latest software
release. For further information, see the Sun Server X3-2L Administration Guide, “Set
Up Software and Firmware Using Oracle System Assistant” on page 30.
You can also obtain updated firmware and software by using My Oracle Support
(MOS) or by submitting to Oracle a physical media request (PMR). For information,
see:
■ “Download Firmware and Software Using My Oracle Support” on page 64
■ “Gathering Information for the Physical Media Request” on page 65
■ “Requesting Physical Media” on page 65
▼ Download Firmware and Software Using My
Oracle Support
1. Go to the following web site: http://support.oracle.com.
2. Sign in to My Oracle Support.
3. At the top of the page, click the Patches & Updates tab.
The Patch search pane appears at the right of the screen.
4. Within the Search tab area, click Product or Family (Advanced).
The Search tab area appears with search fields.
5. In the Product field, select the product from the drop-down list.
Alternatively, type a full or partial product name (for example, Sun Server X3-2)
until a match appears.
64Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
6. In the Release field, select a software release from the drop-down list.
Expand the list to see all available software packages.
7. Click Search.
The Patch Advanced Search Results screen appears, listing the patches for the
software release.
See “Software Releases” on page 63 for a description of the available software
releases.
8. To select a patch for a software release, click the patch number next to the
software release version.
You can use the Shift key to select more than one patch).
A pop-up action panel appears. The pop-up panel contains several action options,
including the ReadMe, Add to Plan, and Download options. For information
about the Add to Plan option, click on the associated drop-down button and select
“Why use a plan?”
9. To review the ReadMe file for the selected patch, click ReadMe.
10. To download the patch for the software release, click Download.
The File Download dialog box appears.
11. In the File Download dialog box, click the patch zip file name.
The patch file for the software release downloads.
Requesting Physical Media
If your processes do not allow downloads from Oracle web sites, you can receive the
latest software release packages by submitting to Oracle a physical media request
(PMR). The preferred method for submitting a PMR is through the My Oracle
Support (MOS) web site.
The high-level tasks for submitting a physical media request are described in these
sections:
Gathering Information for the Physical Media Request
You must have a warranty or support contract for your server in order to make a
physical media request (PMR).
Before you make the PMR, gather the following information:
Getting Server Firmware and Software65
■ Obtain product name, software release version, and patches required. It will be
easier to make the request if you know the latest software release and the name of
the download packages (patches) that you are requesting.
■ If you have access to My Oracle Support – Follow the instructions in “Download
Firmware and Software Using My Oracle Support” on page 64 to determine the
latest software release version and view available software release packages
(patches). After viewing the list of patches, you can navigate away from the
Patch Advanced Search Results page, if you do not want to continue with the
download steps.
■ If you do not have access to My Oracle Support – Use the information in “Software
Releases” on page 63 to determine which packages you want, and then request
those packages for the latest software release.
■ Have the shipping information ready. You will need to provide a contact, phone
number, email address, company name, and shipping address as part of the
request.
▼ Request Physical Media (Online)
Gather the information described in “Gathering Information for the Physical Media
Request” on page 65 before making the request.
1. Go to the following web site: http://support.oracle.com.
2. Sign in to My Oracle Support.
3. Click on the Contact Us link in the upper right corner of the page.
The Create Service Request: Problem screen appears.
4. Describe your request as follows:
a. In the Problem Summary field, type: PMR for latest software release
for Sun Server X3-2.
b. From the Problem Type drop-down menu, select Software & OS Media
Request.
c. In the Support Identifier field, type the Customer Support Identifier
associated with your support contract.
5. Skip the Create Service Request: Selections screen by clicking the Next button
in the upper right corner of the screen twice.
The Create Service Request: More Details screen appears.
6. Provide more information about your request as follows:
a. In the Additional Information section, answer the questions listed in the
following table:
66Sun Server X3-2L Installation Guide for Windows Operating Systems • April 2014
QuestionYour Answer
Is this a physical software media shipment
request?
Which product line does the media request
involve?
Are you requesting a required password
for a patch download?
Are you requesting a patch on CD/DVD?Yes
If requesting a patch on CD/DVD, please
provide the patch number and
OS/platform?
List the product name and version
requested for the physical media
shipment?
What is the OS/platform for the requested
media?
Are any languages required for this
shipment?
Yes
Sun Products
No
Enter the patch number for each download
that you want from the software release.
Product Name: Sun Server X3-2.
Version: Latest software release number.
If you are requesting OS-specific downloads,
specify the OS here. If you are requesting
system firmware only, enter Generic.
No
b. Fill in the Ship-To contact information, which includes a contact name,
phone number, email address, company name, and shipping address.
7. Click the Next button.
The Create Service Request: Severity/Contact screen appears.
8. Enter your contact phone number and preferred method of contact.
9. Click the Submit button.
This completes the physical media request. It can take up to seven business days
to receive the physical media.
▼ Request Physical Media (By Phone)
Gather the information described in “Gathering Information for the Physical Media
Request” on page 65 before making the request.
1. Call Oracle support, using the appropriate number from the Oracle Global
Customer Support Contacts Directory at:
2. Tell Oracle support that you want to make a physical media request (PMR) for
the server.
■ If you are able to access the specific software release and patch number
information from My Oracle Support, provide this information to the support
representative.
■ If you are unable to access the software release information, request the latest
software release for the server.
Installing Updates Using Other Methods
In addition to using Oracle System Assistant and My Oracle Support, you can install
updated firmware and software using one of the following methods:
■ Oracle Enterprise Manager Ops Center – You can use Ops Center Enterprise
Controller to automatically download the latest firmware from Oracle, or
firmware can be loaded manually into the Enterprise Controller. In either case,
Ops Center can install the firmware onto one or more servers, blades, or blade
chassis.