Sun™Management Center 3.6 Version 2
Add-On Software Release Notes
™
Addendum for Sun Fire
T1000 Servers
Sun Microsystems, Inc.
www.sun.com
Part No. 819-4988-10
March 2006, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback
Copyright 2006 Sun Microsystems, Inc., 4150 Network Circle,SantaClara,California95054,U.S.A.Allrightsreserved.
Sun Microsystems, Inc. has intellectual propertyrightsrelatingtotechnologythatisdescribedinthisdocument.Inparticular, and without
limitation, these intellectual property rights may include one or moreoftheU.S.patentslistedathttp://www.sun.com/patents and one or
more additional patents or pending patent applications in the U.S. and in other countries.
This document and the product to which it pertains aredistributedunderlicensesrestrictingtheiruse,copying,distribution,and
decompilation. No part of the product or of this document may be reproducedinanyformbyanymeanswithoutpriorwrittenauthorizationof
Sun and its licensors, if any.
Third-party software, including fonttechnology, is copyrighted and licensed from Sun suppliers.
Parts of the product may be derived fromBerkeleyBSDsystems,licensedfromtheUniversityofCalifornia.UNIXisaregistered trademark in
the U.S. and in other countries, exclusively licensed through X/Open Company, Ltd.
Sun, Sun Microsystems, the Sun logo, Java, docs.sun.com, Solaris, Sun Management Center, Netra, Sun Fire, Sun Blade, and Sun Ultra are
trademarks or registered trademarksofSunMicrosystems,Inc.intheU.S.andinothercountries.
All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the U.S. and in other
countries. Products bearing SPARC trademarks are based upon an architecture developed by Sun Microsystems,Inc.
The OPEN LOOK and Sun™ Graphical User Interface was developed by Sun Microsystems, Inc. for its users and licensees. Sunacknowledges
the pioneering efforts of Xeroxinresearchinganddevelopingtheconceptofvisualorgraphicaluser interfaces for the computer industry. Sun
holds a non-exclusive license from Xerox to the Xerox Graphical User Interface, which license also covers Sun’s licensees who implement OPEN
LOOK GUIs and otherwise comply with Sun’s written license agreements.
U.S. Government Rights—Commercial use. Government users are subject to the Sun Microsystems, Inc. standard license agreement and
applicable provisions of the FAR and its supplements.
DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTYOF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright 2006 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, Californie 95054, États-Unis. Tousdroits réservés.
Sun Microsystems, Inc. possède les droits de propriété intellectuels relatifs à la technologie décrite dans ce document. En particulier, et sans
limitation, ces droits de propriété intellectuels peuvent inclure un ou plusieurs des brevets américains listés sur le site
http://www.sun.com/patents, un ou les plusieurs brevets supplémentaires ainsi que les demandes de brevet en attente aux les États-Unis et
dans d’autres pays.
Ce document et le produit auquel il se rapporte sont protégés par un copyright et distribués sous licences, celles-ci en restreignent l’utilisation,
la copie, la distribution, et la décompilation. Aucune partie de ce produit ou document ne peut être reproduite sous aucune forme, par quelque
moyen que ce soit, sans l’autorisation préalable et écrite de Sun et de ses bailleurs de licence, s’il y en a.
Tout logiciel tiers, sa technologie relative aux polices de caractères, comprise, est protégé par un copyright et licencié par des fournisseurs de
Sun.
Des parties de ce produit peuvent dériver des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque déposée
aux États-Unis et dans d’autres pays, licenciée exclusivement par X/Open Company,Ltd.
Sun, Sun Microsystems, le logo Sun, Java, AnswerBook2, docs.sun.com, Solaris, Sun Management Center, Netra, Sun Fire, Sun Blade, et Sun
Ultra sont des marques de fabrique ou des marques déposées de Sun Microsystems, Inc. aux États-Unis et dans d’autres pays.
Toutes les marques SPARCsont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
aux États-Unis et dans d’autres pays. Les produits portant les marques SPARCsont basés sur une architecture développée par Sun
Microsystems, Inc.
L’interfaceutilisateur graphique OPEN LOOK et Sun™ a été développée par Sun Microsystems, Inc. pour ses utilisateurs et licenciés. Sun
reconnaît les efforts de pionniers de Xerox dans la recherche et le développement du concept des interfaces utilisateur visuelles ou graphiques
pour l’industrie informatique. Sun détient une license non exclusive de Xerox sur l’interface utilisateur graphique Xerox, cette licence couvrant
également les licenciés de Sun implémentant les interfaces utilisateur graphiques OPEN LOOK et se conforment en outre aux licences écrites de
Sun.
LA DOCUMENTATION EST FOURNIE "EN L’ÉTAT" ET TOUTES AUTRES CONDITIONS, DÉCLARATIONS ET GARANTIES EXPRESSES
OU TACITES SONT FORMELLEMENT EXCLUES DANS LA LIMITE DE LA LOI APPLICABLE, Y COMPRIS NOTAMMENT TOUTE
GARANTIE IMPLICITE RELATIVE À LA QUALITÉ MARCHANDE, À L’APTITUDE À UNE UTILISATION PARTICULIÈRE OU À
L’ABSENCE DE CONTREFAÇON.
Sun Management Center 3.6 Version 2 Add-On Software Release Notes: Addendum for Sun Fire T1000 Servers
This document is a supplement to the Sun™ Management Center 3.6 Version 2 Add-On
Software Release Notes for Sun Fire™, Sun Blade™, and Netra™ Systems (819-4987) and
to the Sun Management Center 3.6 Supplement for Sun Fire, Sun Blade and Netra Systems
(819-1153). This addendum adds information about support for Sun Fire T1000
servers only. The document includes the following sections:
■ “What’s New in This Release” on page 1
■ “Supported Systems” on page 2
■ “Documentation” on page 2
■ “New Packages in This Release” on page 3
■ “Known Bugs” on page 3
What’s New in This Release
This section describes changes in Sun Management Center add-on software for Sun
Fire, Sun Blade, and Netra systems between the release of Sun Management Center
3.6 software and this release of Sun Management Center 3.6 Version 2 add-on
software.
■ Adds support for Sun Ultra™ 45 workstations
■ Adds support for Sun Fire T1000 servers
This document covers only the Sun Fire T1000 servers.
1
Supported Systems
Sun Management Center 3.6 Version 2 add-on software supports the following
systems:
■ Netra 440 server
■ Netra 240 server
■ Sun Blade 1500 workstation
■ Sun Blade 2500 workstation
■ Sun Fire V210 server
■ Sun Fire V240 server
■ Sun Fire V250 server
■ Sun Fire V440 server
■ Sun Fire T1000 server
■ Sun Fire T2000 server
■ Sun Ultra 45 workstation
Documentation
This document contains additional information to supplement the following
documents:
■ Sun Management Center 3.6 Version 2 Add-On Software Release Notes for Sun Fire,
Sun Blade, and Netra systems (819-4987)
Includes information about obtaining and installing this version of the add-on
software, as well as minimum required software versions and recommended
patches.
■ Sun Management Center 3.6 Supplement for Sun Fire, Sun Blade and Netra Systems
(819-1153)
Provides instructions on how to install, configure, and use Sun Management
Center software on the supported platforms. The preface contains a list of other
related documentation.
In addition, the following documents relate to the Sun Fire T1000 systems:
■ Sun Fire T1000 Server Product Overview
■ Sun Fire T1000 Server Getting Started Guide
■ Sun Fire T1000 Server Administration Guide
Sun documentation can be found here:
http://www.sun.com/documentation/
2 Sun Management Center 3.6 Version 2 Add-On Software Release Notes: Addendum for Sun Fire T1000 Servers
New Packages in This Release
New packages are installed with this release to support the newly supported model.
TABLE 1 contains a list of the server and agent components for Sun Fire T1000
systems.
TABLE 1 Platform-Specific Packages for Sun Fire T1000
Package Description Layer
SUNWesera Sun Management Center Common Config Reader Module
Sun Fire T1000 Agent Component
SUNWeserl Sun Management Center Common Config Reader Sun Fire
T1000 Platform Support
SUNWesers Sun Management Center Common Config Reader Module
Sun Fire T1000 Platform Component
Agent
Agent
Server
Known Bugs
This section describes software bugs known at the time of this release and that you
might notice or that can affect the operation of Sun Management Center 3.6 Version
2 add-on software. This list supplements the list documented in the Sun Management
Center 3.6 Version 2 Add-On Software Release Notes for Sun Fire, Sun Blade, and Netra
systems (819-4987).
Error Messages prtdiag: not found Displayed on Sun Fire T2000/T1000 Systems
During installation of the core Sun Management Center 3.6 software on Sun Fire
T2000/T1000 systems, the following error messages might be displayed multiple
times and should be ignored.
/opt/SUNWsymon/sbin/es-inst: /usr/platform/sun4u/sbin/prtdiag:
not found
Workaround: None.
[6304450]
Sun Management Center 3.6 Version 2 Add-On Software Release Notes: Addendum for Sun Fire T1000 Servers 3
Reloaded Module Does Not Display Platform Information on Sun Fire T2000/T1000 Systems
In the Module Manager tab, you can use Unload to unload the ELP Config-Reader
Monitoring software module on a Sun Fire T2000/T1000 system. If you then use
Load to reload the software module, the Module Browser information for the Sun
Fire T2000/T1000 systems is not displayed.
Workaround: Perform the following for a temporary fix:
# ./es-stop -a
# ./es-start -a
[6364394]
Processors Table Might Display Erroneous Cautions for CPUs That Do Not Exist on Sun Fire T1000 Systems
On Sun Fire T1000 systems, you might sometimes see erroneous Caution alarms
relating to CPUs that do not exist on the system in question.
Workaround: None.
[6374582]
4 Sun Management Center 3.6 Version 2 Add-On Software Release Notes: Addendum for Sun Fire T1000 Servers
Loading...