registered trademarks of SPARCInternational, Inc.AMD, Opteron, the AMD logo, and the AMD Opteronlogo are trademarks or registered trademarksof
Advanced MicroDevices. UNIXis aregistered trademark of The Open Group.
This softwareand related documentationare provided under a license agreement containingrestrictions onuse anddisclosure and are protected byintellectual
property laws.Except asexpressly permitted in your license agreement or allowed by law, you may not use, copy,reproduce, translate, broadcast,modify,
license, transmit,distribute, exhibit,perform, publishor displayany part,in anyform, orby anymeans. Reverseengineering, disassembly,or decompilationof
this software,unless required by law for interoperability,is prohibited.
The informationcontained hereinis subjectto changewithout noticeand isnot warrantedto beerror-free.If youfind anyerrors, please report them to us in
writing.
If thisis softwareor related documentationthat isdelivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following
notice isapplicable:
U.S. GOVERNMENTEND USERS:Oracle programs,including anyoperating system,integrated software, anyprograms installed on the hardware,and/or
documentation, deliveredto U.S.Government endusers are ?commercial computer software? pursuantto theapplicable FederalAcquisition Regulationand
agency-specific supplementalregulations. Assuch, use,duplication, disclosure, modification,and adaptationof theprograms, including any operating system,
integrated software,any programs installedon thehardware, and/or documentation, shall be subject to license terms and license restrictions applicableto the
programs. Noother rightsare granted to the U.S. Government.
This softwareor hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any
inherently dangerous applications,including applicationsthat maycreate a risk of personal injury.If youuse thissoftware or hardwarein dangerous
applications, thenyou shallbe responsibleto takeall appropriate failsafe,backup, redundancy, andother measures toensure itssafe use.Oracle Corporation
and itsaffiliates disclaimany liabilityfor anydamages causedby useof thissoftware or hardwarein dangerous applications.
This softwareor hardware and documentation may provide access to or information on content, products andservices fromthird parties. Oracle Corporation
and itsaffiliates are notresponsible for and expressly disclaim all warranties of any kind with respect tothird-party content,products, and services. Oracle
Corporation andits affiliateswill notbe responsible forany loss,costs, ordamages incurred due to your access to or use of third-partycontent, products, or
services.
Part No.: E27435-02
Mfg No.: 7045400 Rev 03
June 2013
Sun Ray 3 Plus Client
Getting Started Guide
Congratulations! Your Sun Ray 3 Plus Client combines enhanced security, increased flexibility, and extreme
performance with low power consumption and maintenance costs. And, it is ENERGY STAR 5.0 compliant.
What’s in the Box?
Your shipping box includes a Sun Ray 3 Plus Client, a base for vertical operation, a power supply (external
universal AC/DC adapter), a power cord, and this Getting Started Guide (not shown). A keyboard and mouse
are also included with an optional configuration.
damage, use only the original
equipment power supply.
Note: Attach the base to
ensure that the unit is mounted
vertically, as shown, so the
ventilation screens are not
covered.
Ports and Cables
Sun Ray 3 Plus ports are labeled below.
Figure Legend
1Status LED
2Soft-touch Power Button
3USB 2.0 Ports
4Audio Out
5Audio In
6USB 2.0 Ports
7Ethernet Port (10/100/1000)
8SFP Module Socket
(1 Gigabit/SGMII only)
9Serial Port
10DVI-I Video Out (Primary)
11DVI-I Video Out (Secondary)
12Power (DC In)
Setup
Cables are not supplied with this unit.
Note: This unit supports two
single-link DVI-D or dual-link
DVI-D displays of up to 2560x1600
resolution. Analog displays can be
used with a DVI-I to HD-15 (VGA)
adapter into either video output port.
To assure best performance, however,
use DVI whenever possible.
Dual-link displays require dual-link
cables. If the cables are disconnected
or reconnected, power-cycle the unit
to ensure proper operation.
It is highly recommended that similar
displays be used on a given unit
when dual displays are used.
Note: To avoid glare, do not place
the unit in front of a display.**
Operation
Diagnostics
When the Sun Ray 3 Plus Client is first plugged in, it
powers on.
To save energy, the unit turns off automatically when
idle for 30 minutes.
To power the unit back on, touch the power button or
insert a smart card.
LED
Status LED
StateMeaning
OffThe unit is not plugged in or not turned on.
When the power cord is reconnected, the unit is automatically turned on.
To turn the unit on manually, touch the power button, located below the LED, or
insert a smart card. To turn it off, touch the power button.
Note: Turning the unit off or removing a smart card does not affect users’ sessions.
GreenThe unit is powered on and is functioning normally.
AmberThe LED lights for 2-3 seconds or less at power-on while the unit performs diagnostic
tests.
If the LED remains amber, or becomes amber at any other time, the unit is inoperable.
Contact your system administrator to replace the unit.
The following table describes the LED colors and
states. If the Status LED is green, the unit is
functioning normally.
Smart Card LEDs
OffNo smart card is inserted or detected.
OnThe smart card has been inserted correctly.
LEDs in the smart card slot indicate whether a smart card is inserted and detected.
Contacting Us
■To find additional Sun Ray 3 Plus Client documentation, see:
Utilice solo adaptadores con las siguientes caracteristicas electricas y
que esten debidamente certificados de acuerdo a la legislacion vigente.
El uso de otros adaptadores podria danar el dispositivo y anular la
garantia ademas de provocar riesgos al usuario.
Entrada AC: 100 a 240 VAC, 50 o 60 Hz, 1,5 A max
Salida DC: 12 V, 3 A
** Achtung
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld
am Bildschirmarbeitsplatz vorgesehen. Um störende Reflexionen am
Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im
unmittelbaren Gesichtsfeld platziert werden.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.