Sun Microsystems, Inc.
4150 Network Circle
Santa Clara, CA 95054 U.S.A.
650-960-1300
Part No. 817-0952-10
July 2003, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback
Copyright 2003 Sun Microsystems,Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved.
Sun Microsystems,Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In
particular,and without limitation, these intellectual propertyrightsmayincludeoneormoreof the U.S. patents listed at
http://www.sun.com/patentsandoneormoreadditional patents or pending patent applications in the U.S. and in other countries.
This document and the productto which it pertains are distributed under licenses restricting their use, copying, distribution, and
decompilation. No part of the productor of this document may be reproduced in any form by any means without prior written authorization of
Sun and its licensors, if any.
Third-partysoftware, including font technology,is copyrighted and licensed from Sun suppliers.
Parts of the productmay be derived from Berkeley BSD systems, licensed from the University of California. UNIX is a registeredtrademark in
the U.S. and in other countries,exclusivelylicensedthroughX/Open Company,Ltd.
Sun, Sun Microsystems,the Sun logo, OpenBoot, AnswerBook2, docs.sun.com, SunSolve Online, Sun Fire, and Solaris are trademarks or
registeredtrademarks of Sun Microsystems, Inc. in the U.S. and in other countries.
All SPARCtrademarksareused under license and are trademarks or registered trademarks of SPARCInternational,Inc. in the U.S. and in other
countries. Productsbearing SPARCtrademarks are based upon an architecture developed by Sun Microsystems,Inc.
The OPEN LOOK and Sun™ GraphicalUserInterfacewasdevelopedbySunMicrosystems, Inc. for its users and licensees. Sun acknowledges
the pioneering effortsof Xerox in researching and developing the concept of visual or graphical user interfaces for the computer industry.Sun
holds a non-exclusive license fromXerox to the Xerox Graphical User Interface, which license also covers Sun’s licensees who implement OPEN
LOOK GUIs and otherwise comply with Sun’swrittenlicenseagreements.
U.S. Government Rights—Commercialuse. Government users are subject to the Sun Microsystems, Inc. standard license agreementand
applicable provisionsof the FAR and itssupplements.
DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTYOF MERCHANTABILITY,FITNESS FOR A PARTICULARPURPOSE OR NON-INFRINGEMENT,
ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID.
Copyright 2003 Sun Microsystems,Inc., 4150 Network Circle, Santa Clara, California 95054, Etats-Unis. Tousdroits réservés.
Sun Microsystems,Inc. a les droits de propriété intellectuels relatants à la technologie incorporée dans le produitqui est décrit dans ce
document. En particulier,et sans la limitation, ces droitsdepropriétéintellectuels peuvent inclure un ou plus des brevets américains énumérés
à http://www.sun.com/patentsetunoules brevets plus supplémentaires ou les applications de brevet en attente dans les Etats-Unis et dans
les autrespays.
Ce produitou document est protégé par un copyright et distribué avec des licences qui en restreignent l’utilisation, la copie, la distribution, etla
décompilation. Aucune partie de ce produitou document ne peut être reproduite sous aucune forme, parquelquemoyen que ce soit, sans
l’autorisation préalable et écrite de Sunetdesesbailleursdelicence,s’il y ena.
Le logiciel détenu par des tiers, etquicomprendla technologie relative aux polices de caractères, est protégé par un copyright et licenciépardes
fournisseurs de Sun.
Des parties de ce produitpourront être dérivées des systèmes Berkeley BSD licenciés par l’Université de Californie. UNIX est une marque
déposée aux Etats-Unis et dans d’autrespays et licenciée exclusivement par X/Open Company,Ltd.
Sun, Sun Microsystems,le logo Sun, OpenBoot, AnswerBook2, docs.sun.com, SunSolve Online, Sun Fire, et Solaris sont des marques de
fabrique ou des marquesdéposées de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays.
TouteslesmarquesSPARCsont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
aux Etats-Unis et dans d’autrespays. Les produits protant les marques SPARC sont basés sur unearchitecturedéveloppée par Sun
Microsystems,Inc.
L’interfaced’utilisation graphique OPEN LOOK et Sun™ a été développée par Sun Microsystems,Inc. pour ses utilisateurs et licenciés. Sun
reconnaîtles efforts de pionniers de Xerox pour la rechercheetledéveloppmentduconceptdes interfaces d’utilisation visuelle ou graphique
pour l’industrie de l’informatique. Sun détient unelicensenonexclusivedoXeroxsur l’interface d’utilisation graphique Xerox, cette licence
couvrant également les licenciées de Sun quimettentenplacel’interfaced’utilisation graphique OPEN LOOK et qui en outre se conforment
aux licences écrites de Sun.
LA DOCUMENTATION EST FOURNIE "EN L’ÉTAT" ET TOUTES AUTRES CONDITIONS, DECLARATIONS ET GARANTIES EXPRESSES
OU TACITESSONT FORMELLEMENT EXCLUES, DANS LA MESURE AUTORISEEPARLA LOI APPLICABLE, Y COMPRIS NOTAMMENT
TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L’APTITUDE A UNE UTILISATION PARTICULIERE OU A
L’ABSENCE DE CONTREFAÇON.
Please
Recycle
Contents
Prefacev
Checklist of 2-Post Rackmounting and Setup Tasks2
Inventory for 2-Post Rackmounting3
Attach the Mounting Brackets to the Chassis4
Locate the Mounting Holes5
Install the Mounting Screws6
Install the Server Into the Rack7
Install the Server Into a Populated Rack8
What Next10
Contentsiii
ivSun Fire V440 Server 2-Post Rackmounting Guide • July 2003
Preface
The Sun Fire V440 Server 2-Post Rackmounting Guide provides instructions on how to
install a Sun Fire™ V440 server into a 2-post rack. Instructions for installing the
server into a 4-post rack are included in the Sun Fire V440 Server Installation Guide.
How This Book Is Organized
This guide consists of a single chapter, and replaces all rackmounting and cable
management arm instructions in the Sun Fire V440 Server Installation Guide. After
completing installation of the server into a 2-post rack, however, you must use the
Sun Fire V440 Server Installation Guide to complete server installation.
v
Related Documentation
ApplicationTitlePart Number
Late-breaking product
information
Cabling and power-on
overview
System installationSun Fire V440 Server Installation Guide816-7727
AdministrationSun Fire V440 Server Administration
Parts installation and
removal
Diagnostics and
troubleshooting
Sun Advanced Lights Out
Manager (ALOM) system
controller
Sun Fire V440 Server Product Notes816-7733
Sun Fire V440 Server Setup:
Cabling and Power On
Guide
Sun Fire V440 Server Parts Installation
and Removal Guide
Sun Fire V440 Server Diagnostics and
Troubleshooting Guide
Sun Advanced Lights Out Manager
(ALOM) Online Help
816-7734
816-7728
816-7729
816-7730
817-1960
Accessing Sun Documentation
You can view, print, or purchase a broad selection of Sun documentation, including
localized versions, at:
http://www.sun.com/documentation
Contacting Sun Technical Support
If you have technical questions about this product that are not answered in this
document, consult the following URL:
http://www.sun.com/service/contacting
vi Sun Fire V440 Server 2-Post Rackmounting Guide • July 2003
Sun Welcomes Your Comments
Sun is interested in improving its documentation and welcomes your comments and
suggestions. You can submit your comments by going to:
http://www.sun.com/hwdocs/feedback
Please include the title and part number of your document with your feedback:
Sun Fire V440 Server 2-Post Rackmounting Guide , part number 817-0952-10
Prefacevii
viii Sun Fire V440 Server 2-Post Rackmounting Guide • July 2003
Installing a Sun Fire V440
Server Into a 2-Post Rack
This chapter provides step-by-step instructions for installing a Sun Fire V440 server
into a 2-post rack.
Note – When a Sun Fire V440 server is installed into a 2-post rack, only the disk
drives and power supplies are serviceable in the rack. You need to remove the server
from the rack to service any other component. See the Sun Fire V440 Server PartsInstallation and Removal Guide for more i nformation.
This chapter contains the following procedures and information:
■ “Checklist of 2-Post Rackmounting and Setup Tasks” on page 2
■ “Inventory for 2-Post Rackmounting” on page 3
■ “Attach the Mounting Brackets to the Chassis” on page 4
■ “Locate the Mounting Holes” on page 5
■ “Install the Mounting Screws” on page 6
■ “Install the Server Into the Rack” on page 7
■ “Install the Server Into a Populated Rack” on page 8
1
Checklist of 2-Post Rackmounting and
Setup Tasks
TABLE 1Overview of 2-Post Rackmounting and Setup Steps
StepTaskRefer To
1Unpack the rackmounting kit and
verify the contents.
2Attach the brackets to the server.“Attach the Mounting Brackets to the
3Locate the mounting holes.“Locate the Mounting Holes” on page 5
4Install the mounting screws.“Install the Mounting Screws” on page 6
5Install the server into the rack.“Install the Server Into the Rack” on page 7
If you are installing the server into a populated rack, see the section, “Install the
Server Into a Populated Rack” on page 8.
After completing the tasks in this guide, you are ready to connect cables and cords
and then power on the server. For those instructions, turn to the Sun Fire V440 ServerInstallation Guide on your Documentation CD. Begin with the section, “Install
Optional Components” in Chapter 2.
“Inventory for 2-Post Rackmounting” on
page 3
Chassis” on page 4
2Sun Fire V440 Server Installation Guide • July 2003
Inventory for 2-Post Rackmounting
You need one 2-post rackmounting kit for each Sun Fire V440 server you intend to
install into a rack. You also need the Sun Fire V440 Server Installation Guide from the
Documentation CD and the Rack Alignment template from the ship kit.
Mounting brackets
Rack
Alignment
M4 6mm (6)
template
10-32 x 1/2 (2)
10-32 x 3/4 (8)
Tool Required
■ Screwdriver, long, Phillips No. 2
Sun Fire V440 Server Installation Guide
Installing a Sun Fire V440 Server Into a 2-Post Rack3
Attach the Mounting Brackets to the
Chassis
● Using three M4 screws for each bracket, attach the mounting brackets to the
chassis.
M4
4Sun Fire V440 Server Installation Guide • July 2003
Locate the Mounting Holes
● Use the Rack Alignment template to locate and mark the holes for the mounting
screws on each vertical rack rail. Allow four rack unit spaces (7.0 inches/17.8 cm)
per server.
To use the Rack Alignment template, complete these steps:
a. Place the Rack Alignment template over the vertical rack rail, with the side
marked for 2-post rack installation facing out.
b. Place the Rack Alignment template in the space where the server will be
installed, lining up the bottom of the Rack Alignment template with the top of
the server below. See next figure.
c. Adjust the Rack Alignment template so that the mounting hole is centered on a
rack rail hole and mark that rail hole.
Installing a Sun Fire V440 Server Into a 2-Post Rack5
Install the Mounting Screws
● Install one 10-32 x 1/2 screw on the left and one 10-32 x 1/2 screw on the right
vertical rack rails.
Use the holes you marked in the previous step. Do not fully tighten the screws until
after you install the server. Leave a 0.25-inch (0.64-cm) gap between the head of each
screw and the rack rail.
0.25"
10-32 x 1/2
6Sun Fire V440 Server Installation Guide • July 2003
10-32 x 1/2
Install the Server Into the Rack
Caution – Before you install or remove the server from the rack, be sure the rack is
stabilized so that it cannot move or tip forward. See the rack documentation for
information about stabilizing the rack.
Caution – The server is heavy. Two persons are required to move the server.
1. With one person on each side of the server, lift the server and approach the rack
with the back of the server facing the front of the rack.
2. Lift the server up and over the mounting screw on each side of the vertical rack
rail so that the large hole clears the head of the screw.
Slide the server down so that the server rests on the mounting screws.
Installing a Sun Fire V440 Server Into a 2-Post Rack7
3. Use six 10-32 screws, two screws and the mounting screw on each side, to secure
the server to the vertical rack rails.
Install the Server Into a Populated Rack
Attach the mounting brackets to the chassis using three M4 screws for each bracket.
See “Attach the Mounting Brackets to the Chassis” on page 4 for instructions.
8Sun Fire V440 Server Installation Guide • July 2003
Caution – When installing or removing the server from a populated 2-post rack, be
sure to support the weight of the server, so that you do not damage the component
installed below it in the rack.
1. Slide the server into the open position in the rack.
Allow four rack unit spaces (7.0 inches/17.8 cm) per server.
2. Using a Phillips No. 2 screwdriver, secure the top and bottom screws to the left
and the right vertical rack rails.
Installing a Sun Fire V440 Server Into a 2-Post Rack9
What Next
The next steps are to connect the power cords and Ethernet cables, and then to
power on the server. See the Sun Fire V440 Server Installation Guide, beginning with
the section, “Install Optional Components” in Chapter 2.
10Sun Fire V440 Server Installation Guide • July 2003
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.