Sunex Tools 9011 User Manual
Model # 9011
Air Grease Gun
The pistol-style, single shot Air Grease Gun is a specially
designed, high quality, professional air tool for lubricating
maintenance for transportation implements, agricultural
machinery, industrial equipment, etc.
Features and Functions…
• Chrome-plated container tube and enamel-baked housing.
• Acute-angle design allows wide-angle operation in narrow
space.
• Air vent valve allows trapped air in the tube to escape after
filling with grease.
• Lightweight design for ease of operation.
• Two ways of grease loading available: cartridge loading (with
standard 14 oz. grease cartridge) or suction filling.
• Trigger should be pressed firmly during operation.
• Add oil daily through air fitting before use.
Troubleshooting…
• If your gun fails to work, first check for air pockets in the gun.
To remove trapped air, unscrew the gun head 1 to 1-1/2 turns
and do as follows: Draw back plunger rod fully and release
quickly. Repeat several times. Push plunger rod all the way
in. Tighten the head to the barrel. Press air vent valve several
times to expel the air.
Instructions for Cartridge Loading…
(See Figure 3)
1. Remove the gun head from the container tube.
2. Completely draw back the plunger handle.
3. Insert open end of cartridge into container tube and push all
the way in. Remove the seal or pull tab end from the cartridge.
4. Reassemble the gun head to the container tube. Press the catch
plate and release the piston rod. Pull down the plunger handle.
Suction Filling…
(See Figure 4)
1. Remove the gun head from the container tube.
2. Submerge open end of the container tube into grease bucket
about 2" deep and pull the plunger handle out slowly and
engage rod into key slot.
3. Reassemble the gun head to the container tube. Press the catch
plate and release the piston rod. Pull down the plunger handle.
PARTS BREAKDOWN/OPERATING MANUAL
Acute-angle design
Container tube
Fig. 1 Air Grease Gun
Finger grip
Air Vent
Valve
Fig. 2
Plug
Fig. 3
Cartridge Loading
Fig. 4
Suction Filling
FOR YOUR SAFETY
AND TO PREVENT INJURY:
High pressure hazard.
Wear safety goggles.
Do not exceed 60 psi
with hose or 90 psi
with solid extension.
To do so may cause
personal injury.
▲WARNING
!
9011_man072501.indd 1 6/13/05 11:30:28 AM
2
1
3
6
4
5
7
8
22
9
17
18
19
10
11
12
13
14
15
16
20
21
Part No.
901101
901102
901103
901104
901105
901106
901107
901108
901109
901110
901111
901112
901113
901114
901115
901116
901117
901118
901119
901120
901121
901122
Description
Finger Grip
Air Fitting
Trigger
Body Screw
Air Plunger
Short Spring Kit
Housing Cap
Adaptor
Hexagonal Spout
Air Vent Valve
Plug
Gasket
Plunger Nut
Plunger Washer
Plunger
Backlash Gasket
Long Spring Kit
Container Tube
Piston Rod
Plunger Handle
Catch Plate
Nylon Hose
QTY.
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Parts Breakdown
Model # 9011
Air Grease Gun
Sunex Tools™ air tools
excluding accessories are
warranted against defects
in materials or workmanship for a period of 1 year
from original purchase.
We will repair or replace
at our option any defective
part or unit which proves
to be defective in material
or workmanship within this
warranty plan.
The foregoing obligation
is Sunex’s sole liability
under this or any implied
warranty and under no
circumstances shall we be
liable for any incidental or
consequential damages.
Note: Some states do
not allow the exclusion or
limitation of incidental or
consequential damages,
so the above limitation or
exclusion may not apply
to you.
Naturally repairs required
due to abuse, misuse, damage or repair attempts by
others are not covered by
this warranty.
Send tools requiring
warranty repair to an
authorized Sunex Tools
warranty center, transportation prepaid. Be certain to
include your name and
address, evidence of the
purchase date and description of the suspected defect.
If you have any questions
about warranty service,
please write to: Sunex
Tools, P.O. Box 4215,
Greenville, SC 29608.
This warranty gives you
specific legal rights and
you may also have other
rights which vary from state
to state.
Sunex Tools
_
1 Year Limited Warranty
For Air Tools
SUNEX TOOLS • 315 Hawkins Road
Travelers Rest, SC 29690
9011_man072501.indd 2 6/13/05 11:30:30 AM
Loading...