Sunco REMODEL CAN 6 User Manual

REMODEL CAN 6”
Install Guide and Manual
EASY INSTALLATION
The Brighter Choice
Turn Power OFF
Turn off the circuit breaker that provides power to
1.
the light switch for the recessed lights.
Disconnect existing light fixture (if applicable).
Pull supply wire through the opening, make
4.
electrical connections.
Pull the four mounting clips around the perimeter
7.
of the recessed light can inward so that they are flush with the can.
Slip the electrical cable, the junction box and the
recessed light can into the hole in the ceiling until the flange is resting evenly against the drywall.
9.
After install in ceiling, secure with remodeling clips.
Push each clip up and outward, against the can
side as shown, until it clicks. This will clamp the recessed can against the ceiling.
6.30”
6” Housing
Locate ceiling joists in the area where you want
2.
to install the recessed light with a stud finder to ensure holes do not overlap a joist.
Live to Live (black)
Use the provided template to cut a hole in the
3.
ceiling.
Open the junction box and connect the wires
5.
Live to Live (black)
Neutral to Neutral (white)
Ground to Ground (yellow/green)
6.
Fold the wires into the box and replace the cover.
8.
Insert the housing in ceiling cutout, junction box end first. The recessed can’s edge should now be flush with ceiling.
Trim installation
10.
Attach quick connect from housing to the can
Line up trim ring with an opening
Hook downlight springs into the housing
Push downlight into the housing until is secure
Turn on circuit breaker, test light
11.
WARNING SPECIFICATIONS
To reduce the risk of fire, electric shock or injury to people:
This product should be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product and the hazards involved.
Abide by related regional and local laws or regulations.
Proper grounding is required to ensure safety.
Check for damage during shipping prior to install. If the product is
damaged, do not use it.
Turn off the switch and circuit breaker before installing this recessed can.
Use safety precautions. Safety eyeglasses and gloves are recommended.
NOTE: Fixtures are classified for insulated ceilings-type IC and type-T and
for suspended ceiling type-S.
Please review instructions carefully before proceeding.
Voltage
Operating Temperature
Suitable for Locations Ingress
Housing
Weight
Warranty
120/277V
Max 194°F
Aluminum
1.2lbs
10 years
Loading...