Sunbeam SRS6550 User Manual for SRS6550

Verve Irons

User Guide

SRC6000 – Verve 600 CeraFlow

SRC6500 – Verve 650 CeraFlow

SRS6550 – Verve 655 Stainless

SRA6200 – Verve 620 Resilium

SRA6800 – Verve 680 Resilium

Contents

Australia

www.sunbeam.com.au
1300 881 861
Units 5 & 6,
13 Lord Street,
Botany NSW 2019
Australia

New Zealand

www.sunbeam.co.nz
0800 786 232
Level 6, Building 5,
Central Park,
660-670 Great South Road,
Greenlane, Auckland
New Zealand

Sunbeam’s Safety Precautions 3

Features of your Verve Iron 4

Using your Verve Iron 6

The Safety Auto-Off Feature 7

Care and Cleaning of your Verve Iron 8

Ironing Tips & Tricks 9

Ironing Chart 10

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of children. If
they come into contact with a hot iron it could lead
to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to cool
down. Allow the iron to cool completely before
storing.

• Do not wind the cord around the soleplate while the
iron is still hot.

Sunbeam is very safety conscious when
designing and manufacturing consumer products, but
it is essential that the product user also exercise care
when using an electrical appliance. Listed below are
precautions which are essential for the safe use of an
electrical appliance:

• Read carefully and save all the instructions
provided with an appliance.

• Always turn the power off at the power outlet before
you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.

• Do not use your appliance with an extension cord
unless this cord has been checked and tested by a
qualified technician or service person.

• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the appliance.

• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.

• Children should be supervised to ensure that they
do not play with the appliance.

• The temperature of accessible surfaces may be high
when the appliance is operating.

• Never leave an appliance unattended while
in use.

• Do not use an appliance for any purpose
other than its intended use.

If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.

• Do not leave the iron unattended while it is plugged
into the power outlet.

• Always unplug the iron from the power outlet before
filling or emptying the water tank.

• The iron must be used and rested on a stable
surface.

• The iron is not to be used if it has been dropped, if
there are visible signs of damage
or if it is leaking.

• When placing the iron on its heel rest, ensure the
surface

on which it is placed is stable.

• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.

• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair or
adjustment.

• For additional protection, Sunbeam recommend
the use of a residual current device (RCD)
with a tripping current not exceeding 30mA in
the electrical circuit supplying power to your
appliances.

• Do not immerse the appliance in water
or any other liquid unless recommended.

• Appliances are not intended to be operated
by means of an external timer or separate remote
control system.

• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast
type environments.

3

Features of your Sunbeam
Verve Iron

Powerful shot of steam

Pressing the shot of steam button instantly
produces a powerful shot of steam to remove
stubborn wrinkles.

Vertical shot of steam

Pressing the shot of steam button with the iron
in an upright position produces a vertical shot of
steam, which is ideal for steaming curtains and
suits, and removing creases from delicate fabrics.

Fine spray mist

Pressing the spray button provides a fine mist
spray to dampen hard-to-iron fabrics.

Easy-fill water inlet

Holds 300ml of water for continual high steam
performance without having to refill the tank
regularly.

Drip-stop

steam system

The drip-stop steam system automatically stops
water flowing to the steam chamber should the
temperature fall too low to generate steam.
This prevents dripping, even at low
temperatures.

Full length button groove

For ironing around buttons.

2400 watts for fast heat up

Provides faster initial heat up and rapid heat
recovery during ironing. The 2400W element
helps to maintain your selected temperature,
and provides superior shot of steam output.

Safe-Store™ strip

For easier handling and storage. The heat strip
changes from red to black so you know the
iron is safe to handle and store.

Resilium Anodised Steam Assist Soleplate

CeraFlow™ Soleplate (SRC6000 & SRC6500)

Up to 7x more scratch resistant vs. other
coatings*. Extra tough ceramic soleplate for
speed, agility and durability.

4

(SRA6200 & SRA6800)

Sunbeam’s premium, exclusive soleplate is
incredibly durable, and provides super low
friction to achieve 70% easier glide. With 172
steam holes to maximise steam distribution.

Steam Dial

Temperature Dial

Stainless Steel Soleplate (SRS6550)

Sleek and smooth stainless steel is hard wearing,
and an excellent heat conductor to get tough
wrinkles out faster.

Safety auto-off

The iron automatically switches itself off if
left in the ironing position (horizontal) for 30
seconds, or in the heel rest position (vertical)
for 15 minutes. (For more information on the

safety auto off feature see page 7).

Power light

Illuminates to indicate that the iron is
connected to the power outlet and the power
is turned on.

Thermostat light

Illuminates to indicate that the iron is
heating and goes out when it has reached the
temperature selected on the temperature dial.
The thermostat light cycles on and off during
ironing as the iron maintains the selected
temperature.

Stable heel rest

Extra large heel rest keeps the iron stable on
the ironing board.

Cord wrap

The built-in cord wrap facility allows you to
wind the cord around the heel for neat and
tidy storage of the cord when the iron is not
in use.

Concentric steam and temperature dials

The steam and temperature dials are
positioned together for easy adjustment.

Variable steam dial

Allows you to select the desired steam output
for each garment. Alternatively, select the DRY
setting to iron without steam.

Temperature dial

Allows you to select the desired temperature
for each garment. The adjustable temperature
dial also indicates the amount of steam
recommended for use on each temperature
setting.

5