Sunbeam SR6900 User Manual

®

Accura® Digital Resilium

Digital iron with twin element technology

Instruction Booklet

SR6900

Please read these instructions carefully
and retain for future reference.

Contents

Sunbeam’s Safety Precautions 3

About Accura® Digital Resilium

Features of your Sunbeam Accura® Iron 5

Using your Sunbeam Accura® Iron 8

Care and Cleaning 10

Ironing Guide 10

Ironing Chart 11

®

4

Important instructions – retain for
future use.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of
children. If they come into contact with
a hot iron it could lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to
cool down. Allow the iron to cool completely
before storing.

Sunbeam are very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:

• Read carefully and save all the instructions
provided with an appliance.

• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.

• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.

• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.

• This appliance is not intended for use by young
children or infirm persons unless they have
been adequately supervised by a responsible
adult to ensure that they can use the appliance
safely.

• Never leave an appliance unattended while
in use.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

• Do not wind the cord around the
soleplate while the iron is still hot.

• Do not leave the iron unattended
while it is plugged into the power outlet.

• Always unplug the iron from the power
outlet before filling or emptying the
water tank.

• Young children should be supervised to ensure
that they do not play with the appliance.

• Do not use an appliance for any purpose
other than its intended use.

• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.

• For safety reasons and to avoid maintenance
by unskilled persons, some appliances are
‘sealed’ using tamperproof screws. Such
appliances should always be returned to the
nearest Sunbeam Appointed Service Centre
for adjustment or repair if required.

• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.

• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.

• Do not immerse the appliance in water
or any other liquid unless recommended.

3

Accura® Digital Resilium

About Accura

®

The innovative Accura Digital Resilium iron
delivers accurate ironing performance, every
time. With a streamlined design and ‘thumb
touch’ operation, it features the latest in
ironing expertise.

An independent heating element and
dedicated steam chamber allow Accura to
produce maximum steam, even at very low
temperatures.

Soleplate temperature is monitored by a
digital thermostat to ensure the best results,

Twin element technology

The Accura Digital Resilium contains
two elements – one in the soleplate and
another in the dedicated steam chamber
– to allow maximum steam performance,
even at low temperatures. Steam generation
is independent of the soleplate, ensuring
maximum steam output at any temperature
setting. Unlike conventional single element
irons, the soleplate temperature stays
constant, as it is unaffected by the continual
inflow of water from the steam valve and shot
of steam pump.

whilst thumb touch controls on the handle
make temperature adjustment quick and
easy.

Dedicated to delivering superior performance,
Accura displays the soleplate temperature
and fabric selection on the LCD.

Safety and peace of mind are guaranteed
with safety auto off. The iron automatically
switches off if left unattended in either the
upright or ironing position.

Digital thermostat

The digital thermostat provides precise
temperature control, allowing you to select
the exact temperature recommended for each
garment. It eliminates temperature overshoot
and minimises temperature fluctuations.
This ensures consistently superior results
and prevents scorching.

Figure 1

4

Steam chamber element

Soleplate heating element