Sunbeam SR6400, SR6300 User Manual

SUNBEAM IRON
User Guide
SR6300 Sunbeam Sprint Iron SR6400 Sunbeam Aerostream Iron
SR6300 SR6400
Contents
Sunbeam’s Safety Precautions 3
Features of your Sunbeam Sprint Iron 4
Features of your Sunbeam Aerostream Iron 6
Using your Sunbeam Iron 8
Care and Cleaning 9
Ironing Chart 10
Australia
www.sunbeam.com.au 1300 881 861 Units 5 & 6, 13 Lord Street, Botany NSW 2019 Australia
New Zealand
www.sunbeam.co.nz 0800 786 232 Level 6, Building 5, Central Park, 660-670 Great South Road, Greenlane, Auckland New Zealand
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR IRON
• Do not leave a hot iron within reach of children. If they come into contact with a hot iron it could lead to serious burns.
• Iron only on an ironing board.
• An iron takes approximately 30 minutes to cool down. Allow the iron to cool completely before storing.
• Do not wind the cord around the soleplate while the iron is still hot.
• Do not leave the iron unattended while it is plugged into the power outlet.
Sunbeam is very safety conscious when designing
and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:
• Read carefully and save all the instructions provided with an appliance.
• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when the appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do no play with the appliance.
• The temperature of accessible surfaces may be high when the appliance is operating.
• Never leave an appliance unattended while in use.
If you have any concerns regarding the performance and use of your appliance, Please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood.
• Always unplug the iron from the power outlet before filling or emptying the water tank.
• The iron must be used and rested on a flat, stable surface.
• Always store your iron resting on its heel rest.
• When placing the iron on its heel, ensure that the surface on which the stand is placed is stable.
• The iron is not to be used if it has been dropped, if there are any visible signs of damage or if it is leaking.
• Do not use an appliance for any purpose other than its intended use.
• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
• Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.
• For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.
• Do not immerse the appliance in water or any other liquid unless recommended.
• Appliances are not intended to be operated by means of an external timer or separate remote control system.
• This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
3
Features of your SR6300 Sunbeam Sprint Iron
Thermostat light
Illuminates to indicate that the iron is heating and goes out when it has reached the selected temperature. The thermostat light cycles on and off during ironing as the iron maintains the selected temperature.
Vertical shot of steam
Pressing the shot of steam button with the iron in an upright position produces a vertical shot of steam, which is ideal for steaming curtains and suits, and removing creases from delicate fabrics.
Powerful shot of steam
Pressing the shot of steam button instantly produces a powerful shot of steam to remove stubborn wrinkles.
Variable steam
Select the desired steam output. Alternatively select the ‘0’ setting to iron without steam.
Easy-fill water inlet
The water inlet cover opens fully to allow easy filling of the water tank, without bubbling or spilling.
Fine spray mist
Pressing the spray button provides a fine mist spray to dampen hard-to-iron fabrics.
Self-Clean Button
Helps to flush out impurities to prevent spotting on garments.
EasyGlide Non-stick soleplate
Glides easily across all fabric for quick and easy ironing
Full length button groove
For ironing around buttons.
4
Anti Calc System
Prevents scale build up for a better performing, longer lasting iron.
Loading...
+ 8 hidden pages