Sunbeam SR4250, SR4100, SR4200, SR4300 User Manual

Pro Steam Irons

Instruction Booklet

This book covers the use and care of the following Sunbeam Irons:

SR4100 Pro Steam Polished shot and spray iron
SR4200 Pro Steam Teflon® shot and spray iron
SR4250 Pro Steam Teflon® shot and spray iron
SR4300 Pro Steam Teflon® shot and spray iron with Auto-off

Please read these instructions carefully
and retain for future reference.

Contents

Sunbeam’s Safety Precautions 3

Features of your Pro Steam Iron 4

Using your Pro Steam Iron 6

Care and Cleaning 8

Ironing Tips and Tricks 9

Ironing Chart 10

Important instructions – retain for
future use.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of
children. If they come into contact with a hot
iron it could lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to cool
down. Allow the iron to cool completely before
storing.

Sunbeam is very safety conscious when

designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:

• Read carefully and save all the instructions
provided with an appliance.

• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.

• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.

• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.

• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.

• Children should be supervised to ensure that
they do no play with the appliance.

• The temperature of accessible surfaces may be
high when the appliance is operating.

• Never leave an appliance unattended while
in use.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

• Do not wind the cord around the soleplate
while the iron is still hot.

• Do not leave the iron unattended while it is
plugged into the power outlet.

• Always unplug the iron from the power outlet
before filling or emptying the water tank.

• Do not use an appliance for any purpose
other than its intended use.

• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.

• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.

• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.

• Do not immerse the appliance in water
or any other liquid unless recommended.

• Appliances are not intended to be operated
by means of an external timer or separate
remote control system.

• This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.

33

Features of your Sunbeam
Pro Steam Iron

Powerful shot of steam

Pressing the shot of steam button instantly
produces a powerful shot of steam to remove
stubborn wrinkles.

Vertical shot of steam

Pressing the shot of steam button with the iron
in an upright position produces a vertical shot
of steam, which is ideal for steaming curtains
and suits, and removing creases from delicate
fabrics.

Fine spray mist

Pressing the spray button provides a fine mist
spray to dampen hard-to-iron fabrics.

Easy-fill water inlet

The water inlet cover opens fully to allow easy
filling of the water tank, without bubbling or
spilling.

Large water tank

Holds 280ml of water for continual high steam
performance without having to refill the tank
regularly.

Full length button groove

For ironing around buttons.

®

Teflon

Select non-stick soleplate

(SR4200) & (SR4250)
Glides easily across all types of fabric and

prevents sticking.

4

Polished Aluminium soleplate (SR4100)
Durable polished aluminium soleplate

is hard -wearing and easy to clean.