Sunbeam SM8900 User Manual

StickMaster® Smart System

Stick blender, Processing bowl, Whisk, Milk frother and Smart storage system

Instruction Booklet

SM8900

Please read these instructions carefully and retain for future reference.

Contents

Sunbeam’s Safety Precautions 1

Features of your Sunbeam StickMaster stick blender 2

Using your StickMaster stick blender 6

A Guide to your StickMaster stick blender 11

Care and Cleaning 13

Recipes 14

Important instructions – retain for future use.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR SUNBEAM

STICKMASTER STICK BLENDER.

• Do not handle appliance with wet hands.

• Avoid contact with moving parts.

• Do not touch the blade while it is operating, as it is very sharp. After the appliance has been switched off the blade will continue to rotate a moment longer.

• Do not use the appliance with hot oil, as there is a risk of burns due to splashing.

Sunbeam is very safety conscious when designing

and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:

• Read carefully and save all the instructions provided with an appliance.

• Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug when the appliance is not in use and before cleaning.

• Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.

• Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The temperature of accessible surfaces may be high when the appliance is operating.

• Never leave an appliance unattended while in use.

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

• Hold the stick blender firmly and up right while using it.

• Do not operate the appliance without a workload.

• When using extremely heavy loads, the appliance should not be operated for more than 4 seconds. This does not apply to the recipes detailed in this booklet.

• Never insert metal or other utensils, such as knives or forks, into the inside of the bowl while the appliance is operating.

• Do not use an appliance for any purpose other than its intended use.

• Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.

• Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.

• For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.

• Do not immerse the appliance in water or any other liquid unless recommended.

• Appliances are not intended to be operated by means of an external timer or separate remote control system.

• This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

Features of your Sunbeam StickMaster stick blender

Variable speed control

A five speed setting allows the optimum speed to be used for various food processing tasks.

Power button

Pressing the ‘I’ button will operate the stick blender at the speed selected on the variable speed control dial.

Turbo speed button

Pressing the ‘II’ button will provide an extra boost of power.

600 watt motor housing

High powered 600 watt motor for the most demanding blending tasks.

Detachable stainless steel shaft

The stainless steel shaft detaches with the push of the side buttons for easy cleaning.

Ice crushing blades

Unique blade design with vertical teeth for optimal blending. Crushes ice in seconds.

Food pusher

Lid

Chopping blade

Dual sided shredding / slicing disc

Spindle

Processing bowl attachment

1250ml/5 cup processing bowl attachment conveniently attaches to the stick blender motor housing to process ingredients for doughs, pastries, patties etc. as well as chop, shred and slice a variety of food including meats, vegetables, nuts and herbs.

Non-slip mat

Keeps the processing bowl secure on the bench during use.

Chopping blade holder

PUSH

Features of your Sunbeam StickMaster stick blender (continued)

Milk frother attachment

Frothes warm or cold milk in an instant and is ideal for baby chinos, hot chocolates or froth for other beverages.

Whisk attachment

Stainless steel whisk conveniently attaches to the stick blender. Ideal for beating egg whites and mixing light batters.

Accessory stand

Holds motor housing, stainless steel shaft, milk frother and whisk attachments when not in use.

Using your StickMaster stick blender

Important: Ensure that the stick blender is unplugged from the power outlet before assembling or removing attachments.

1. Insert the motor housing into the hole on the top of the shaft until you hear a click. See figure 1.

Figure 1

2. Plug the power cord into a 230-240 volt power outlet and turn the power on.

3. Select the optimal speed for the processing task, by turning the speed control dial from 1 to 5. Speed one on the speed control dial is the slowest and speed five is the fastest. Then lower the stick blender into food and depress the power button (I).

Note: All stick mixers are designed to operate only when the power buttons remain depressed.

4. For an extra boost of power during operation, the turbo speed button (II) may be depressed.

Note: The power button (I) should be released when selecting turbo speed.

5. To stop the stick blender, take your finger off the power button or the turbo speed button.

6. To detach the shaft, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 2.

Figure 2

Using your StickMaster stick blender continued

Using the processing bowl

Using the processing bowl with the chopping blade

1. Place the processing bowl on the non-slip mat, ensuring the surface is clean and level.

2. Fit the stainless steel chopping blade into the processing bowl.

3. Place food into the processing bowl.

4. Attach the lid onto the processing bowl and rotate the lid in a clockwise direction until it locks into position.

5. Insert the motor housing into the hole on

Note: All stick blenders are designed to operate only whilst the power buttons remain depressed.

8. For an extra boost of power during operation, the turbo speed button (II) may be depressed.

Note: The power button (I) should be released when selecting the turbo speed button (II).

9. To stop the stick blender, take your finger off the power button or turbo speed button.

10. To detach the processing bowl

attachment, push the buttons at either side of the base of the motor housing until the two pieces separate. See Figure 4.

Figure 3 Figure 4

the top of the processing bowl attachment until you hear a click. See Figure 3.

6. Plug the power cord into a 230-240 volt power outlet and turn the power on.

7. Hold the bowl with one hand while operating the power button with the other. Select the optimal speed for the processing task by turning the speed control dial from 1 to 5 and then depressing the power button (I). Speed one on the speed control dial is the slowest and speed five is the fastest.

+ 19 hidden pages