Sunbeam SB08 Operating Instructions Manual

Sunbeam Mini Sewing Machine

Operating Instructions

Model No. SB08

Read all instructions carefully before using this item

SMT122911

Component Identification

Threading the Machine:

1. Needle Clamp

Operating Instructions:

9. On/Off Switch

2. Bobbin Compartment

3. Needle

4. Take-up Lever

5. Tension Screw

6. Thread Spindle

7. Bobbin Holder

8. Hand Wheel

10. Speed Button

11. Battery Compartment

12. DC Jack

13. Foot Pedal Jack

14. Presser Foot Lever

15. Bobbin Winder

1. Make sure the OFF before inserting batteries.

2. Put 4 AA batteries into the battery compartment on the bottom of the machine.

3. Turn ON the sewing machine and the machine will start sewing immediately

(note: if the machine is used with included pedal, the machine should stay on
OFF. It will only work when you push down the pedal).

4. Make sure the machine is properly threaded and fabric is in the right position for

sewing before you turn the machine on.