Multi Processor &
Multi Processor Plus
User Guide
LC5500 / LC6500
LC5500_LC3680_LC6500_LC3266_17EM3.indd 1 |
|
|
12/12/17 09:58 |
|
|
Contents
Sunbeam’s Safety Precautions |
1 |
Features of your Multi Processor |
2 - 3 |
Attachments for your Food Processor |
4 - 5 |
Before First Use of the Multi Processor |
6 |
Care & Cleaning |
6 |
Storing your Food Processor |
7 |
Using your Food Processor |
8 |
Tips for the best Food Processing Results |
9 |
Using your Blender (LC6500 Only) |
10 |
Tips for the best Blending Results (LC6500 Only) |
11 |
Recipes |
12 - 23 |
Warranty |
24 |
Important Instructions - retain for future use
LC5500_LC3680_LC6500_LC3266_17EM3.indd 2-1
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM FOOD PROCESSOR.
•Always use extreme care when handling processing blades and cutting discs. These are extremely sharp and may cause injury if handled incorrectly. Always store processing blades
and cutting discs in their respective covers or processing containers.
•Unplug from power outlet before cleaning.
•Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
•Always fit the safety cover before using the food processor.
•Do not put hot liquids into the food processor bowl or blender jug. Cool to room temperature before processing.
•Avoid contacting moving parts at all times.
•Place the processor bowl onto the base of the processor before fitting any attachments.
•All blades and attachments should be removed with care before cleaning.
•Do not over fill the processor.
•Always remove the blade before emptying the processor bowl of its contents.
•When mixing a heavy load, ie. a ‘0.5kg dough’ do not operate food processor for more than 38 seconds at a time. This does not apply for any of the recipes detailed in this booklet.
Sunbeam is very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance:
•Read carefully and save all the instructions provided with an appliance.
•Always turn the power off at the power outlet before you insert or remove a plug. Remove by grasping the plug - do not pull on the cord.
•Turn the power off and remove the plug when the appliance is not in use and before cleaning.
•Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person.
•Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•The temperature of accessible surfaces may be high when the appliance is operating.
•Never leave an appliance unattended while in use.
•Do not use an appliance for any purpose other than its intended use.
•Do not place an appliance on or near a hot gas flame, electric element or on a heated oven.
•Do not place on top of any other appliance.
•Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface.
•Do not operate any electrical appliance with a damaged cord or after the appliance has been damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment.
•For additional protection, Sunbeam recommend the use of a residual current device (RCD)
with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances.
•Do not immerse the appliance in water or any other liquid unless recommended.
•Appliances are not intended to be operated by means of an external timer or separate remote control system.
•This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
If you have any concerns regarding the performance and use of your appliance, please visit the Sunbeam Website or contact Sunbeam Consumer Care - details are on the back page.
Ensure the above safety precautions are understood.
1
12/12/17 09:58
Features of your Multi Processor (LC5500/LC6500)
A |
|
Blender (LC6500 only) |
|
|
B |
|
|
||
|
L |
|
|
|
C |
M |
|
|
|
|
OZS |
CUPS |
|
|
|
N |
|
||
|
56 |
7 |
|
|
D |
|
48 |
6 |
|
|
|
40 |
5 |
|
|
|
32 |
4 |
|
|
|
24 |
3 |
|
E |
|
|
|
|
|
|
16 |
2 |
|
|
|
8 |
1 |
O |
|
|
|
||
F |
|
|
|
|
G
|
PULSE |
0 |
|
|
|
|
|
1 |
H |
|
J |
|
|
2 |
K
I
2
LC5500_LC3680_LC6500_LC3266_17EM3.indd 2-3
Features of your Multi Processor (LC5500/LC6500)
A. Small Food Pusher
The small food pusher is ideal for thin or narrow foods.
B. Two Food Pushers
The two food pushers guide food down evenly into the feed tube and can also be used to close the chute while processing
C. Extra Wide Chute
The wide feed chute makes processing ingredients easy. Use the chute to guide ingredients down into the selected blades. With a wider chute, vegetables do not need to be cut into small pieces to fit in the chute.
D. Processing Bowl Lid
The processing bowl lid activates the automatic safety system. The Multi Processor will not operate unless the lid is correctly positioned on the processing bowl and locked into place.
E. Processing Bowl
The processing bowl is designed to encourage even, efficient processing. It has a capacity of 2 litres for food &
500mL for liquids. The bowl locks into place on the motor base.
F.Removable Processor Coupling
Can be removed for easy cleaning of the processing bowl.
G.Pulse Button
The pulse provides short bursts of power and allows ingredients to be chopped whilst maintaining the integrity of the food.
H. Two Speed Control Dial
The large speed dial with two speeds, makes it easy to select your desired setting.
I. Non-slip Feet
Non-slip feet keep the food processor secure on the bench top during use.
J. 800W Motor
The base houses a powerful 800W motor, to provide great processing results every time.
K. Cord Storage
Convenient storage of the cord is located at the back of the motor base.
Features of your Multi Processor Pro (LC6500 only)
L. Ingredient Cup
Handy 60mL ingredient cup, locks into place on the lid.
M. Flexible lid with pouring hole
The glass jug features a pouring hole in the centre, that allows you to add ingredients during the blending process.
N. 1.5 Litre Glass Jug
The sizeable 1.5 litre glass jug features specially designed internal ribs to cycle ingredients back into the blade system for superior results.
The jug features an easy to pour lip and is marked in both cups and litres (L) for ease of use.
O. Fixed Blade Assembly
Specially designed for extra durability, the heavy-duty, stainless steel blade with a six-blade construction, crushes ice cubes, produces a smooth consistency when pureeing and combines ingredients perfectly for a smoothie.
3
12/12/17 09:58
Attachments of your Food Processor |
|||
|
Disc Blades |
|
Base Driven Spindle Attachments |
Slicing |
Grating |
Shredding |
Whisk |
Blade |
Blade |
Blade |
|
SHARP CAUTION |
SHARP CAUTION |
SHARP CAUTION |
|
|
|
|
Dough Blade |
|
|
|
Processing Blade |
|
Blade Holding Disc |
|
|
Spindle
4
Attachments of your Food Processor
Disc Blades
The stainless steel disc blades are inserted into the blade holding disc for use.
The round hole at the end of the disc blades should align with the round hole in the middle of the blade holding disc.
CAUTION: Care must be taken when handling the metal blades as these items are extremely sharp.
• Slicing Blade
Ideal for fruit, vegetables, hard cheeses and deli meats.
• Grating Blade
Ideal for fruit, vegetables, hard cheeses and chocolate.
• Shredding Blade
Ideal for fruit, vegetables.
Blade Holding Disc
The blade holding disc houses the various processing blade attachments – slicing, grating and shredding.
The blade holding disc is driven by the top of the spindle.
Base Driven Spindle Attachments
The below attachments are driven by the base of the spindle and can only work one at a time.
Whisk
The whisk attachment is ideal for whisking egg whites and creams.
Dough Blade
The dough blade is contoured for fast, efficient processing. It is ideal for mixing doughs, heavy cake mixes and batters.
Processing Blade
The stainless steel processing blade is contoured to fit the shape of the processing bowl to provide the most efficient chopping and/or mixing action.
The processing blade can be used to chop raw meats to mince, chocolate to crumbs and nuts to paste.
Please ensure that the processing blade protective cover is removed before using.
CAUTION: Use extreme caution, as blades are sharp. Always handle the processing blade by the plastic central section.
Spindle
The spindle drives all the food processing attachments. Place attachments on the spindle prior to placing in the processing bowl.
5
LC5500_LC3680_LC6500_LC3266_17EM3.indd 4-5 |
|
|
12/12/17 09:58 |
|
|
||
|
|
|
|
Before First Use of the Multi Processor
Step 1. Remove Packaging
Ensure all packaging has been removed.
Step 2. Position Machine
Place the motor base facing you on a dry, level surface.
Step 3. Wash Parts
Wash the processing bowl, lid and all attachments in warm water using a mild detergent. Dry each part thoroughly before use.
CAUTION: Care must be taken when handling the metal blades as these items are extremely sharp.
Step 4. Power
Before you assemble the food processor (or blender for LC6500 only), ensure that the power cord is unplugged.
Care & Cleaning
Motor Base
Clean the motor body by wiping with a damp, soft sponge with mild detergent.
Note: Always unplug the Multi Processor before cleaning.
PULSE
1
2
CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents when cleaning the exterior.
Note: Never immerse the motor base in water or any other liquid.
6
Food Processor
When you have finished processing, unplug your Multi Processor from the power outlet.
Wash all accessories, attachments and all surfaces that have come into contact with food in warm soapy water.
• Dishwasher use
All plastic components deteriorate through the prolonged use of a dishwasher for cleaning.
CAUTION: Care must be taken when handling the metal blades as these items are extremely sharp.
Blender (LC6500 Only)
• Quick cleaning method
Half fill the blender with warm water and a small amount of detergent. Press the PULSE button for 10-20 seconds. Then remove the jug and rinse it under running water.
• For thorough cleaning
Wash the lid, ingredient cup, rubber seal, glass jug with fixed blade assembly in warm soapy water.
Note: Do not clean any part of the blender in the dishwasher.
LC5500_LC3680_LC6500_LC3266_17EM3.indd 6-7
Storing your Food Processor Attachments
All of the food processor attachments |
|
can be conveniently stored within the |
|
processing bowl for easy storage. |
Blade |
|
|
Note: Wash & dry each attachment |
Holding |
thoroughly before storing. |
Disc |
Make sure the removable processor |
|
coupling is locked into the processing bowl. |
Disc |
|
|
Firstly place the processing blade (with |
Blades |
|
|
protective cover) over the spindle, making |
|
sure the blade is at the lowest position on |
|
spindle. Then place in the processing bowl |
|
over the processor coupling. |
|
Then place the dough blade on top of the |
Whisk |
|
|
processing blade, it will not lock in, just |
|
rest on top. |
|
Then place the whisk over the spindle so it |
Dough |
|
Blade |
||
rests on top of the dough blade. |
|
|
Then the disc blades can now be placed |
|
|
vertically down the sides of the processing |
Processing |
|
bowl. |
Blade |
|
Lastly place the blade holding disc on top of |
Protective |
|
Cover |
||
the spindle. |
||
|
||
The processing lid with the two food |
|
|
pushers can be positioned & locked into the |
|
|
processing bowl as usual. |
Spindle |
|
|
The power cord can be stored within the cord storage area at the back of the motor base.
Processor
Coupling
Processing
Bowl
7
12/12/17 09:58
Loading...