Sunbeam JM5900 User Manual

Please read these instructions carefully
and retain for future reference.

Beatermix Pro

Hand Mixer with a powerful 320 watt motor

Instruction Booklet

JM5900

Sunbeam’s Safety Precautions 1
Features of your Beatermix Pro 2
Using your Beatermix Pro 4
Mixing Guide 5
Mixing Tips 5
Oven Temperature Guide 6
Care and Cleaning 7
Recipes 8
Icing, Fillings, Frostings and Creams 14

Contents

Important instructions – retain for
future use.

1

Sunbeam are very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are precautions which are essential
for the safe use of an electrical appliance:

• Read carefully and save all the instructions
provided with an appliance.

• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug
when the appliance is not in use and
before cleaning.

• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.

• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.

• Close supervision is necessary when your
appliance is being used near children or
infirm persons.

• Never leave an appliance unattended while
in use.

• Young children should be supervised to ensure
that they do not play with the appliance.

• Do not use an appliance for any purpose
other than its intended use.

• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.

• For safety reasons and to avoid maintenance
by unskilled persons, some appliances are
‘sealed’ using tamperproof screws. Such
appliances should always be returned to the
nearest Sunbeam Appointed Service Centre
for adjustment or repair if required.

• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
dropped or damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre
for examination, repair or adjustment.

• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.

• Do not immerse the appliance in water
or any other liquid unless recommended.

If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR
SUNBEAM BEATERMIX PRO.

• Never eject beaters or dough hooks when the
appliance is in operation.

• Ensure fingers are kept well away from moving
beaters and dough hooks.

• When mixing extremely heavy loads the
appliance should not be operated for more
than 1 minute. This does not apply to any of
the recipes detailed in this booklet.

2

Features of your Beatermix Pro

Boost button

Provides an extra burst of power for
those extra tough mixing tasks.

High & Low speeds

10 speed control switch

5 high-range speed settings for beating and
mixing, and 5 low range speeds for kneading.

Eject button

The eject button effortlessly releases the
beaters or dough hooks for easy cleaning.

Special ‘V-groove’ beaters

Specially designed steel beaters provide
maximum aeration and optimum mixing
results.

3

5 position swivel cord

Rotates to allow for comfortable
left or right hand use.

Powerful 320 watt motor

Handles the toughest mixing tasks.

Dough hooks

The strong steel dough hooks take the hard
work out of kneading dough and other heavy
mixtures.

Before using your Beatermix Pro

Before fitting the beaters or dough hooks, be
sure the power cord is unplugged from the
power outlet and the speed control switch is
in the ‘0’ OFF position.

1. Select the desired attachments,
depending on the mixing task to be
performed: beaters for mixing and
beating, or dough hooks for kneading.

Inserting the beaters

2a. Beaters can be inserted into either

socket, as the beaters are identical.

Inserting the dough hooks

2b. To insert the dough hooks, place the

dough hook with the small washer into
the left socket. Place the other dough
hook into the right socket.

Note: Ensure both beaters and dough
hooks are fully inserted into the correct
sockets or your mixing results may be
affected.

Using your Beatermix Pro

1. With the speed control switch in the ‘O’
OFF position, plug the power cord into a
230-240V AC power outlet.

2. Place the beaters or dough hooks into the
ingredients to be mixed and using the
speed control switch select the desired
mixing speed.

Select the Low range setting for kneading
dough and thicker mixtures, folding, or
when using the dough hooks. Select the
High range setting for mixing, beating,
and whipping.

Clearly marked instructions for correct mixing
speeds for each type of mixture are shown in
the mixing guide on page 5.

Tip: Always start mixing at slow speeds and

increase the speed gradually to prevent
ingredients splashing out of the mixing
bowl.

When adding dry ingredients use the
lowest speed to prevent the ‘snow storm’
effect.

3. Once you have finished mixing, turn the
speed switch to the ‘0’ OFF position and
unplug the cord from the from the power
outlet. Remove the beaters/dough hooks
from the mixture and press the eject
button firmly to release.

4. To remove the beaters/dough hooks, place
fingers loosely around the spindles and
press the eject button located at the front
of the head of the Beatermix Pro.

Note: Never eject the beaters or dough
hooks when the Beatermix Pro is in
operation.

4

Using your Beatermix Pro