WIRELESS SPEAKER
Instruction Manual
CPSTW566
MODEL#: CPSTW566
®
Read Me
Important Safety Instr uctions
1) Readtheseinstructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Unplug this apparatus during lightning storms or when unused for long periods of time.
12) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
FCC NOTICE TO USERS:
FCCID: 2AMSOCPST566WH
Caution: Changes or modifications not expressly
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications, however there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation betwee
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for Help.
The device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Summit CE Group LLC is under license.
n the equipment and receiver.
approved by the Party responsible for
2
INTRODUCTION
Thank you for purchasing the CPSTW566! This
tion manual is
instruc
and and use your
underst
erms
T
covered in this
familiar to you as you use your Speaker(s).
ended to
int
manual
help you better
Bluetooth® Speaker(s).
become more
will
PRODUCT OVERVIEW
9 10
8
8
11
Note
*
1. LED Screen
2. Power Button
3. Mode Button
4. Play/Pause Button
5. Volume-/Previous
6. Volume+/Next
7. Water Proof Seal
3 4 5 67
2
8. Micro USB Charging Port
9. LED Indicator
10. USB Music Port
11.
AUX Port
*
Under Water Pr
Note:
oof Cover
1
3
OPERATION
Charging The Speaker
Plug one end of the provided micro USB cable into the
USB port of the speaker (located on the front panel of the
device) and plug the other end into a power source.
Note: This USB port is accessed by lifting the water proof
cover labeled "DC IN/USB/AUX."
Powering On and Off
On: Press hold and release the “Power” button. The
speaker will turn red and the LED screen will display the
word "Hi" indicating that the device has powered on.
Immediately after this, you will see the word "Blue" begin
flashing on the display. This indicates that the speaker has
entered Bluetooth® pairing mode.
Off: Press hold and release the “Power” button to turn the
Speaker off. All lights displayed by the speaker will go
dark, you will hear a sound prompt, and the LED screen
will briefly display the word "Off".
Bluetooth® Pairing
To pair the CPSTW566 with your phone, simply open your
Bluetooth® settings and select CPSTW566. The word
"Blue" will stop flashing and the speaker will make a
notification sound indicating that pairing has been
successful.
Music Controls
• Play/Pause: Press the "Play/Pause" button to play/
pause music from your phone.
• Next Song: Press the "Volume+/Next" button to play
the next song.
• Previous Song: Press the "Volume-/Previous" button
4
• to play the previous song.
• Increase Volume: Press and hold the "Volume+/
Next”button until you reach your desired volume.
• Lower volume: Press and hold the “Volume-/Previous”
button until you reach your desired volume.
RBG Light Modes
There are five LED light modes that can be adjusted by
pressing and holding the Mode button while sound is
streaming through the speaker.
1. Red (Default)
2. Green
3. Blue
4. Party Mode (Flashes Multicolored Light.)
5. Off (No Lights)
Listening To Music Using The USB Music Port
Take a USB drive and download music onto it in an MP3/
WAV/WMA/APE/FLAC format. Plug this USB drive into the
USB Music Port on the speaker. Music will immediately
begin to play.
Using The AUX Cable
Plug one end of the provided AUX cable into the AUX port
on the speaker. Plug the other end of the AUX cable into
your phone. You may now stream music from your phone
to the speaker without using Bluetooth®.
Radio Mode
For best reception while using the radio be sure to plug the
provided AUX cable into the AUX port on the speaker.
Doing this will cause the AUX cable to act as an antenna.
• Switch Between Bluetooth® And Radio: Press the
"Mode" button.
5
• Scan For And Save Channels: Press and hold the
"Play/Pause" button.
• Mute/Unmute The Radio: Press the "Play/
Pause"button.
• Raise/Lower Volume: Press and hold the "Volume+/
Next" and the "Volume-/Previous" buttons to raise and
lower the volume respectively.
• Select Channel: Press the "Volume+/Next" and the
"Volume-/Previous" buttons to raise and lower the
channels respectively.
TWS
The CPSTW566 supports True Wireless Pairing. As such, if
you have purchased a second CPSTW566 you may stream
music from your phone to both speakers at the same time.
While in Bluetooth Mode, press and hold the "Play/Pause"
button on one of the speakers to pair them together. You
will hear a sound notification. Next, open your phone's
Bluetooth® settings and select CPSTW566 to pair both
speakers to your phone. To unpair, the speaker's from each
other press and hold either of the "Play/Pause" buttons.
Note: To pair a second speaker to your phone while one is
already paired, simply press and hold the "Play/Pause"
button on the paired speaker.
PACKAGE CONTENTS
• CPSTW566 Speaker
• Micro USB Cable
• AUX Cable
• Manual
6
Loading...